rootCategory.motorcycle.motorcycle-accessories

Yamaha Genuine

GYTR

Star Custom Accessories

Arlen Ness

SHAD

Cycra

Yoshimura

Nelson-Rigg

Daytona

Pyramid

Matrix Concepts

J&M Motorcycle Audio

Techmount

PIAA

D’COR Visuals

Vortex

Graves Motorsports

Vforce

Black

Blue

Raven

Silver

Black/Silver

White

Midnight

Carbon Fiber

Clear

Blue/Black

Matte Black

Blue/White

Black/White

Black/Red

Matte Gray Aluminum

Black/Blue

Silver/Black

Gold

Black/Gray

Armor Gray

Matte Silver

Carbon

Gray

Performance Black

Team Yamaha Blue w/ Logo

White/Blue

Matte Gray

Liquid Graphite

Intensity White

Candy Red

Envy Green

Blue/Silver

Yamaha Blue

Matte Phantom Blue

Motorcycle

series

Series

Protection

Storage

Performance

Seats

Trim & Accents

Windshields & Wind Protection

Backrests & Racks

Handlebars & Controls

Covers

Stands & Spools

Lighting

Body

Service Parts

Foot Controls

Locks & Security

Heated Accessories

Electrical

Audio and Tech

Gauges & Displays

Oil Filter

Tools

Wheels & Tires

Fork Seal

Graphics, Stickers & Decals

Mats

product_category

Product Category

$0.00 - $999.99

$2,000.00 - $2,999.99

$3,000.00 - $3,999.99

price

Price

brand

Brand

mm: 36

mm: 48

Medium

Height: Tall

mm: 14

size

Size

color

Color

Constructed of billet aluminum and coated with a hard anodized finish. The GYTR Billet Ignition Cover was developed in conjunction with race teams to provide a stronger cover that limits the risk of loosening oil cap and timing plugs during a race. The improved finish is both durable and attractive. Installation removes the oil cap and timing plugs.

Kit includes: Powerflow Intake Radiator Shrouds, Performance Front Fender, Powerflow Rear Fender, Stadium Number Plate, Side Number Panels, Airbox Cover, and Fork Guards.

A collaboration with Cycra.

<ul>
	<li>
	Powerflow Intake Race Systems; dramatically decreases operating temperatures with by-pass airflow technology that maximizes cooling efficiency
	</li>
	<li>
	Injection-molded precise fit and high gloss finish
	</li>
	<li>
	Used by JGRMX and other top level racing teams
	</li>
</ul>

The GYTR Radiator Fan adds extra engine cooling capacity in muddy, technical, or extreme cross-country conditions for enhanced engine performance and prolonged life.

&nbsp;

<ul>
	<li>Plugs directly ino the OE wire harness and controlled through ECU</li>
	<li>High efficiency fan ducting</li>
</ul>

Note: Raditator Fan Kit seamlessly integrates with GYTR Radiator Guards #BNL-E24D0-V0-00 and GYTR Radiator Braces #BHR-E24C0-V0-00

Tested and proven by factory Yamaha MX and XC race teams in the most extreme race environments, the YZ450F GYTR Clutch Cover is engineered to offer exceptional strength and protection.

<ul>
	<li>
	6061 billet aluminum offers exceptional impact durability
	</li>
	<li>
	Scratch resistant hard anodized finish&nbsp;
	</li>
	<li>
	Machined GYTR logo
	</li>
</ul>

This 20-piece graphic kit covers the plastics and the swing arm. 

A collaboration with D&#39;COR Visuals.

&nbsp;

<ul>
	<li>Thick, durable vinyl construction featuring the GYTR, Yamalube&nbsp;and bLUcRU logos</li>
	<li>A white colored number plate background</li>
	<li>Easy way to enhance the style of your YZ and refresh worn plastics</li>
	<li>Super strong adhesive holds up through tough riding conditions</li>
</ul>

The YZ450F GYTR Ignition Cover is engineered to offer an exceptional level of strength and protection with a slimmer profile. Developed in conjunction with race teams, both timing plugs have been removed to create a simple more compact design that is less prone to damage.

<ul>
	<li>
	6061 billet aluminum offers exceptional impact durability
	</li>
	<li>
	Lighter and Stronger than OE
	</li>
	<li>
	8mm slimmer than OE
	</li>
	<li>
	Eliminates OE timing plugs
	</li>
	<li>
	Lighter and Stronger than OE
	</li>
	<li>
	Scratch resistant hard anodized finish
	</li>
</ul>

Protects intake from dust or water intrusion during cleaning of the bike. Eases air box cleaning and leaves no gaps that would allow water to penetrate when used.

&nbsp;

<ul>
	<li>Features a large, tool-less knob that is made of ABS plastic with a fully sealed rubber gasket on the leading edge</li>
	<li>Easy to install and remove</li>
</ul>

The Rear Sprockets are made from 7075-T6 billet aluminum CNC-machined for maximum fit accuracy. The rear sprockets features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes other than stock are for closed-course competition only on ’06 and later off-road models and all street legal models. Changing the final drive ratio affects exhaust emissions and also affects speedometer readings.YZ models are for closed-course competition use regardless of modification.

The R1 Bike Cover is made from premium, ultra-durable Sur Last® solution-dyed poly fabric. Resists fading and protects your bike from the elements. Custom tailored for a precise fit.

These Yamaha protective engine covers are not only stylish, they're high-quality and designed to help protect your investment

<ul>
	<li>Made from long-fiber nylon 6-6 which is very strong yet flexible, as well as being impact, chemical, and fire-resistant</li>
	<li>Approved for racing by the FIM&trade; (sanctioning body for international racing like MotoGP&nbsp;and WSBK) and the AMA</li>
	<li>Engine protections sets like these are required for all racing associations, great for added protection on street use as well</li>
	<li>Covers install directly over the stock engine covers (no need to remove)</li>
	<li>Cover set includes all 3 engine covers</li>
	<li>Easy installation and includes all necessary hardware</li>
	<li>A far less expensive alternative to full billet covers</li>
</ul>

The fender eliminator pulls the license plate up close to the tail section for a nice, clean look which is also significantly smaller than the stock setup.

<ul>
	<li>
	Lightweight aluminum construction with a black powder-coated finish
	</li>
	<li>
	Retains the use of the stock turn signals
	</li>
	<li>
	Incorporates a license plate light
	</li>
	<li>
	Easy, bolt together design
	</li>
	<li>
	Meets all DOT requirements (many aftermarket options are illegal)
	</li>
</ul>

Protects both radiator and oil cooler from rocks and other debris – a rock can puncture your radiator or oil cooler; a potentially dangerous situation if coolant or oil gets on your tires, leading to an expensive repair.

<ul>
	<li>Two-piece kit</li>
	<li>Black guard features an aluminum colored, laser-etched R1 logo on the radiator guard</li>
	<li>Great for track or street use</li>
	<li>Easy installation &ndash; no radiator or oil cooler removal required</li>
</ul>

Transforms your bike into a single-seater for a sportier look – easily replaces the passenger seat

&nbsp;

<ul>
	<li>Stylish cushion and the R1 logo</li>
	<li>Comes in coordinating model colors</li>
	<li>High-quality finish that complements the YZF-R1 styling and flows with the contour lines of the rear tail section</li>
	<li>Installs in minutes</li>
</ul>

Helps protect your gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers.

Helps protect the gas tank from nicks and abrasions caused by belt buckles, snaps, or zippers.

The GYTR Frame Sliders for YZF-R1 and MT-10 feature a stealthy, all-black design to match the styling of your bike and help minimize frame and body damage in the event of an accidental tip over.

&nbsp;

<ul>
	<li>
	Slim, black ultra-high-molecular-weight polyethylene (UHMWPE) slider with black powder coated aluminum mounting bracket provides a modern, stealthy look.
	</li>
	<li>
	Includes all necessary hardware
	</li>
	<li>
	No modification to fairings required for installation
	</li>
	<li>
	Sold as a set
	</li>
</ul>

This Fender Eliminator pulls the license plate up close to the tail section for a nice, clean look which is also significantly smaller than the stock setup.

&nbsp;

<ul>
	<li>Lightweight aluminum construction with a black powder-coated finish</li>
	<li>Retains the use of the stock turn signals</li>
	<li>Incorporates a license plate light</li>
	<li>Easy, bolt together design</li>
	<li>Meets all DOT requirements</li>
</ul>

The YZF-R3 Endurance Windscreen is designed to provide additional wind protection.

&nbsp;

<ul>
	<li>Approximately 50mm taller than the stock windscreen</li>
	<li>Coverage area extends to the chin area of the rider&#39;s helmet for greater wind protection for relaxed, fatigue-free traveling on long rides</li>
	<li>Maintains excellent high-speed durability while also providing strong wind protection in a wide variety of situations</li>
	<li>Includes R logo</li>
</ul>

These Frame Sliders help protect the frame and bodywork against damage in a tip over. Comes in a set of two. Requires no special tools for install.

<ul>
	<li>
	Designed to firmly attach to the crankcase via an L-shaped stay
	</li>
	<li>
	Preserves the &ldquo;horizontal line&rdquo; styling theme of the overall body
	</li>
	<li>
	The wing-like shape and aluminum-styled R logo graphic on the sides vividly communicates the R-series spirit
	</li>
	<li>
	Mounting the protectors on the crankcase achieves both a reduction in the possibility of chassis damage and an added look of toughness
	</li>
	<li>
	Can be installed without modifying the fairings
	</li>
	<li>
	Includes necessary hardware needed for installation
	</li>
</ul>

The YZF-R3 Radiator Guards provide added protection from rocks and other road debris. Also add a custom touch to the overall look of the radiator and front end.

<ul>
	<li>
	Constructed of stainless steel mesh
	</li>
	<li>
	Custom R3 logo
	</li>
	<li>
	Same design as the radiator guards used by the Yamaha Factory Racing Team
	</li>
	<li>
	Installs in minutes
	</li>
</ul>

This carbon fiber tank pad features the R3 logo and protects the tank from belt, buckle/zipper scratches and other damage. Easy adhesive application.

The Rear Seat Cowl transforms your bike into a single-seater for a sportier look and comes color matched to factory colors.

&nbsp;

<ul>
	<li>Features a stylish cushion</li>
	<li>High-quality finish that complements styling</li>
	<li>Installs in minutes</li>
</ul>

The R6 Bike Cover is made from premium, ultra-durable Sur Last® solution-dyed poly fabric. This cover resists fading, and helps protect your bike from the elements. Custom tailored for a precise fit.

These Yamaha protective engine covers are not only stylish, they’re high-quality and designed to help protect your investment. Made from strong, yet flexible long-fiber nylon 6-6, the protection set is impact, chemical, and fire-resistant. Approved for racing by the FIM™ (sanctioning body for international racing like MotoGP and WSBK) and the AMA.

&nbsp;

<ul>
	<li>
	Covers easily install directly over the stock engine covers (no need to remove)
	</li>
	<li>
	3-piece set includes left alternator, right timing, and clutch cover
	</li>
	<li>
	Includes all necessary hardware
	</li>
	<li>
	Black with Yamaha logo inserts
	</li>
</ul>

The fender eliminator pulls the license plate up close to the tail section for a nice, clean look that is significantly smaller than the stock setup.

<ul>
	<li>
	Lightweight aluminum construction with a black powder-coated finish
	</li>
	<li>
	Retains the use of the stock turn signals
	</li>
	<li>
	Incorporates a LED license plate light
	</li>
	<li>
	Easy, bolt together design
	</li>
	<li>
	Meets all DOT requirements (many aftermarket options are illegal)
	</li>
</ul>

The GYTR YZF-R6 Quick Shifter enhances rider control by limiting chassis movement — eliminating the need to come off the throttle; allowing clutch-less shifting.

&nbsp;

<ul>
	<li>
	Works with standard shift pattern
	</li>
	<li>
	Saves wear and tear on the clutch and transmission
	</li>
	<li>
	Easy plug-and-play installation
	</li>
</ul>

The YZF-R6 Radiator Guard helps protect the radiator from catastrophic rock or debris damage that can result in costly repairs.

<ul>
	<li>
	Stylish black aluminum construction featuring the R6 logo
	</li>
	<li>
	Installs in minutes
	</li>
</ul>

The YZF-R6 Rear Seat Cowls transform your bike into a single-seater for a sportier look by easily replacing the passenger seat.

&nbsp;

<ul>
	<li>
	Stylish cushion with the R6 logo
	</li>
	<li>
	High-quality finish that complements the YZF-R6 styling and flows with the contour lines of the rear tail section
	</li>
	<li>
	Comes in coordinating model colors
	</li>
	<li>
	Installs in minutes
	</li>
</ul>

The YZF-R6 Slim Design Frame Sliders help to minimize frame and body damage if the bike is accidentally dropped.

&nbsp;

<ul>
	<li>
	Slim design with an angular, geometric shape for a very modern, stylish look &ndash; not like your usual round-style puck
	</li>
	<li>
	Brushed aluminum insert with laser etched R6 logo
	</li>
	<li>
	Clear anodized billet aluminum mounting bracket with black ultra-high-molecular-weight polyethylene (UHMWPE) slider
	</li>
	<li>
	Factory designated location for precise fairing hole drilling
	</li>
</ul>

These swingarm spools will fit any Yamaha motorcycle equipped with 6mm threaded spool bosses, they were specifically designed for the ’17~’18 YZF-R6 — as the spool boss is set back under the swingarm and requires a collar.

&nbsp;

<ul>
	<li>These CNC-machined, billet aluminum decorative spools have a high-quality anodized finish</li>
	<li>Lightweight and durable</li>
	<li>Sold in pairs</li>
</ul>

For use with conventional rear stands, sold separately

Note: Not compatible with MotoGP&nbsp;rear hook-type stands

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES