rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Magellan

Assault Industries

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Storage

Audio and Tech

Sun Tops

Performance

Lighting

Mirrors

Overfenders & Flares

Safety Gear

Electrical

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Inch: 1.5

Pounds: 2500

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

The Stealth Sound Bar Series by Wet Sounds™ represents the world’s first universal supercharged, plug-and-play sound system for your Yamaha Side-by-Side.

A collaboration with Wet Sounds.

Packed with a variety of features, this all-new sound bar is the perfect speaker for your high-performance audio system, whether you&rsquo;re blasting through a mudhole or cruising the dirt road. Powered by a 6-speaker, 180 W unit with four 3&quot; full-range speakers, and a pair of 1&ldquo; titanium tweeters, this speaker system pumps out plenty of rich, dynamic sound, while a built-in Class D amplifier pumps out up to 200 watts. And if you like bass, the built-in DSP amplifier with

D-Bass Tech gives the Stealth 6 Ultra HD the outstanding lowend response you demand from any system.

<ul>
	<li>The patented design is built with a full extruded aluminum housing</li>
	<li>IP67 rated &mdash; protection from total dust ingress and water immersion between 15cm and 1m deep for 30 minutes.</li>
	<li>Powder-coated finish for additional durability and resistance from the elements</li>
	<li>Built-in Bluetooth&reg; connectivity with source control to stream your favorite music&mdash; you can control your sound while you drive with a wireless remote that mounts on your vehicle&#39;s steering wheel</li>
	<li>Includes universal wiring, mounts, and 1.5&quot; clamps needed for installation</li>
	<li>Not designed to integrate with Yamaha&rsquo;s Factory Audio systems</li>
</ul>

Fits all Side-by-Side models.

A collaboration with Wet Sounds.

Packed with a variety of features, this all-new sound bar is the perfect speaker for your high-performance audio system, whether you&rsquo;re blasting through a mudhole or cruising the dirt road. Powered by a 10-speaker, 300 W unit with eight 3&quot; full-range speakers, and a pair of 1&quot; titanium tweeters, this marine-rated speaker system pumps out plenty of rich, dynamic sound, while a built-in Class D amplifier pumps out up to 300 watts. And if you like bass, the built-in DSP amplifier with D-Bass Tech gives the Stealth 10 Ultra HD the outstanding low-end response you demand from any system.

<ul>
	<li>The patented design is built with a full extruded aluminum housing</li>
	<li>IP67 rated &mdash; protection from total dust ingress and water immersion between 15cm and 1m deep for 30 minutes.</li>
	<li>Powder-coated finish for additional durability and resistance from the elements</li>
	<li>Built-in Bluetooth&reg; connectivity with source control to stream your favorite music&mdash; you can control your sound while you drive with a wireless remote that mounts on your vehicle&#39;s steering wheel</li>
	<li>Includes waterproof connector, universal L-mount brackets for end cap mounting or sliding top mount channel system, auto turn-off feature to save battery life, backlit LED illuminated control panel, a fully integrated wiring harness, and 1.5&quot; clamps needed for installation</li>
	<li>Not designed to integrate with Yamaha&rsquo;s Factory Audio systems</li>
</ul>

Fits all Side-by-Side models

Side view mirrors conveniently provide additional views at once.  Functional swing to fold in and out for rides or transport.

The Yamaha designed, developed and tested Side View Mirrors provide an excellent view and unmatched durability. The wide-angle, distortion-free glass viewing area provides great clarity and rearward visibility. Automotive style fold-away action provides &nbsp;added convenience when pulling in enclosed trailers or on tight trails by reducing the need to readjust the viewing area after folding back. Ultra tough die-cast aluminum pivots provide the durability you come to expect.

<ul>
	<li>
	Wide angle provides the optimal distortion-free view for off road use
	</li>
	<li>
	Scratch resistant glass viewing area
	</li>
	<li>
	Automotive fold-away action
	</li>
	<li>
	Die-cast aluminum pivot mechanism
	</li>
</ul>

&nbsp;

Note: Mounts are sold separately and are model specific.

<ul>
	<li>2021~ Wolverine with Hard Cab Doors, use Mount #B4J-F6206-T1-00</li>
	<li>2021~ Wolverines, use Mount #B4M-F6206-V0-00</li>
	<li>Other Side-by-Sides with 1.75&quot; and 2&quot; ROPS, use Mount #B4J-F6206-V0-00</li>
</ul>

The all-new Yamaha Mirror Mount lineup is constructed from ultra-durable billet aluminum with matched black textured finish offering up superior performance and next-level integration for Wolverine models with cab enclosures.

The Rhino Storage Cover helps protect your investment from the elements during times of storage.  Features the Rhino logo. Not designed for use while trailering.

The Power Commander® V is loaded with tons of new features. Now less than half the size of the Power Commander® III USB and USB-powered from a computer, no longer requiring a 9-volt adaptor for programming.

A collaboration with Dynojet Research.&nbsp;&nbsp;

<ul>
	<li>A 2-position map switching function comes built in (map switch not included)</li>
	<li>
	Gear input allows for map adjustment based on gear and speed
	</li>
	<li>
	Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input, such as temperature
	</li>
	<li>
	With gear position input connected, the PC V is capable of allowing each cylinder to be mapped individually and for each gear (e.g., on a 4-cylinder motorcycle with a 6-speed transmission there could be up to 24 separate fuel tables)
	</li>
	<li>
	Unit has a -100/ +250% fuel change range (up from -100/ +100%) and 10 throttle position columns (up from 9 on PC III USB)
	</li>
	<li>
	Also features an enhanced &ldquo;accel pump&rdquo; utility via increased adjustment and sensitivity ranges
	</li>
</ul>

Yamaha has created a new alternate weight clutch kit to keep optimal clutch performance when installing oversize tires.

Everything you need to change the clutch weights are included in this kit.

<ul>
	<li>Optimizes low speed clutch operation when installed with the oversized wheels and tires (sold separately)</li>
	<li>For use with oversized wheels and tires</li>
</ul>

The Kolpin Overhead Gun Bow Rack is a great solution to transport your equipment on your side-by-side.

A collaboration with Kolpin.&nbsp;

<ul>
	<li>
	In-cab rack secures and protects two (2) guns or one (1) bow
	</li>
	<li>
	Rubber strap provides quick and silent access to firearms or bow
	</li>
	<li>
	Scratch-resistant foam-lined grips offer secure protection for exposed firearms, firearms encased in soft-sided cases or compound bows
	</li>
	<li>
	Easy installation without vehicle modification
	</li>
</ul>

Yamaha and SSV Works® have collaborated again to create the 3rd generation Overhead Audio System for all Viking VI, Viking, and Wolverine models. This upgraded system takes SSV’s highly successful Overhead Audio System and adds next level performance and features! Designed to withstand harsh conditions while working on the farm or ripping down the trail, this system preserves valuable cargo space by mounting overhead.

A collaboration with&nbsp;SSV Works&reg;.

<ul>
	<li>
	MRB3 head unit with hyper white, backlit LED display makes it easy to read day or night
	</li>
	<li>
	200W max power
	</li>
	<li>
	Waterproof, marine-grade, two-way, 6.5&quot; speakers with optional customizable colored grill covers
	</li>
	<li>
	Bluetooth&reg; compatible with audio control (volume, track, forward/back, play/pause)
	</li>
	<li>
	3.5mm AUX-input
	</li>
	<li>
	SiriusXM Satellite Radio&reg; compatible
	</li>
	<li>
	6 preset EQ options
	</li>
	<li>
	Plug-and-play installation
	</li>
	<li>
	Integrated LED dome light
	</li>
</ul>

These mud flaps are designed to provide addition protection from mud and water. They are constructed from injection molded rubber and steel for durability and offer integrated styling that matches your side-by-side. 

Mirror mounting clamp for 1.5" tubes. Required for installation with most Assault mirrors, except when installing directly on Yamaha accessory hard cab doors.

A collaboration with Assault Industries

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

The RAM Mounts LED Spotlight has been redesigned with a new LED bulb yielding a brighter, more efficient light for added safety while keeping a lower power draw to your ATV, boat or vehicle.

A collaboration with RAM.

The weather-resistant body shields the 30-degree spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location. Consists of a u-bolt base that makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Included in this package is hardware for tubing that is 0.50&quot; to 1.25&quot; in diameter.

<ul>
	<li>12 Volts DC</li>
	<li>9 Watts</li>
	<li>1900 Lumens</li>
	<li>Sealed Beam</li>
	<li>30-Degree Spot Light</li>
	<li>Frosted Lens</li>
	<li>4500K Color Temp</li>
</ul>

These heated seat covers are the epitome of passenger comfort for cold weather conditions.

&nbsp;

<ul>
	<li>Constructed of tough, durable, 600 denier, solution-dyed fabric</li>
	<li>Controller simply plugs into the AC outlet</li>
	<li>Hook-and-loop attachment straps</li>
	<li>Automatic 15 minute shut-off safety feature</li>
	<li>Sold individually</li>
	<li>See Specification Tab for approximate temperatures</li>
</ul>

Designed by Yamaha’s advanced team of engineers, the all-new Genuine Yamaha Technology Racing (GYTR) Turbo Kit is more powerful and easier to install than previous model years. The GYTR Turbo Kit uses the renowned Garrett GT2554R turbo to meet Yamaha’s highest standards of reliability, while power delivery is meticulously tuned to provide thrilling, confidence-inspiring performance for all drivers.

This kit is legal for sale in California under the California Air Resources Board executive order D-807U-4.

<ul>
	<li>
	Up to a 60% increase in peak power over stock
	</li>
	<li>
	High performance Garrett GT2554R liquid-cooled ball bearing turbo provides decreased spool time for broad power gains throughout the RPM range
	</li>
	<li>
	Pre-programmed, plug-and-play ECU delivers precise fuel injection settings, enhancing drivability across the entire RPM range for maximum power and maximum fun
	</li>
	<li>
	Large, highly efficient water-to-air intercooler is easier to install, while an integrated cooling fan increases charge-air cooling capacity and prevents heat soak when idling
	</li>
	<li>
	SAE 310S cast stainless steel exhaust manifold reduces weight and eases installation
	</li>
	<li>
	Lightweight molded-silicone intake is less susceptible to power-robbing &ldquo;heat soak&rdquo;
	</li>
	<li>
	The high flow air box located between the vehicle&rsquo;s occupants on the rear panel features a GYTR-branded lid, allows easy, tool-free air filter access, maximizes air intake, and minimizes water/dust intrusion
	</li>
	<li>
	Heightened &ldquo;turbo whistle&rdquo; sound for ultimate excitement
	</li>
	<li>
	Relocated water pump is easier to service, bleed and install
	</li>
	<li>
	Dealer installation recommended
	</li>
	<li>
	IMPORTANT: Requires the use of premium 91-octane gas
	</li>
</ul>

The GYTR® Multi-Stage Foam Air Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Yamalube® Bio-degradable Foam Air Filter Oil & Cleaner Kit or Foam Filter Oil.

This mount works with both 2" and 3" harnesses. 4-Point connection.

Everything you need to install the GYTR 4-Point Harness on the driver and passenger seats with one, convenient kit.

No modification required- installs with hand tools for ease of installation.&nbsp;Complies with ANSI/ROHVA standards. Kit includes:

<ul>
	<li>
	Harness Mount #B5H-F47K0-V0-00&nbsp;and GYTR 4-Point Harness #B57-F47K0-V0-00
	</li>
	<li>
	Harness Mount is constructed of forged aluminum for strength and durability
	</li>
</ul>

The GYTR YXZ 4-Point Harness combines the shoulder and lap belts for a secure seat restraint for your YXZ. The OEM-style buckle, durable shoulder padding and adjustable straps ensure maximum comfort and added confidence for long days riding. 

<ul>
	<li>Adjustable padded straps provide excellent comfort&nbsp;</li>
	<li>Styled to match the accessory Interior Padding Kit #B57-F11G0-V0-00, sold separately</li>
	<li>Retains operation of drivers side seatbelt indicator&nbsp;</li>
	<li>OEM-style buckle for ease of use&nbsp;</li>
	<li>Sold in pairs&nbsp;</li>
	<li>Complies with ANSI/ROHVA standards when installed with the GYTR Harness Mount&nbsp;</li>
</ul>

&nbsp;

When fitting to Model Year 2019, the accessory YXZ Harness Mount #B5H-F47K0-V0-00, sold separately) is required.

The GYTR Wolverine RMAX 4-Point Harness Mount eases the installation of the upper harness straps without modification to the OEM roof support and positions the angle of the straps to provide excellent comfort to the GYTR 4-Point Harness.

<ul>
	<li>Compatible with either 2&quot; or 3&quot; harnesses</li>
	<li>Constructed of strong, forged aluminum material with a powder coated finish for added durability</li>
	<li>Ease of installation utilizing common hand tools</li>
	<li>Includes seat back belt guide for proper strap placement and excellent comfort&nbsp;</li>
	<li>Sold in pairs</li>
	<li>RMAX4 requires two sets to accommodate both the front and rear harnesses</li>
</ul>

Note: Front and rear are sold separately.

The GYTR Wolverine RMAX 4-Point Harness combines the shoulder and lap belts for a secure seat restraint for your RMAX. The OEM-style buckle, durable shoulder padding and adjustable straps ensure maximum comfort and added confidence for long days on the trail.

<ul>
	<li>Adjustable padded straps provide excellent comfort&nbsp;</li>
	<li>Pull tabs for convenient adjustment while wearing the recommended safety gear</li>
	<li>Front harness retains operation of drivers side seatbelt indicator</li>
	<li>OEM-style buckle for ease of use</li>
	<li>Sold in pairs&nbsp;</li>
</ul>

Note: Front and rear harnessess sold separately

 
Requires:

<ul>
	<li>GYTR Harness Mount #B4J-F47P0-V0-00. Sold separately. 
	&nbsp;</li>
</ul>

Complies with ANSI/ROHVA standards when installed with the GYTR Harness Mount&nbsp;

Yamaha Factory racing horsepower now available for our YXZ racers. The GYTR Race Cylinder Head Assembly comes fully assembled with REM-finished GYTR race camshafts and CNC-ported head for increased flow, providing ultimate performance and reliability.

&nbsp;

<ul>
	<li>Head surface decked for improved compression ratio from 11.5-12.5</li>
	<li>Stock valves, buckets, and springs are included for durability and easy maintenance</li>
	<li>Requires the use of the Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
	<li>Designed to be used with additional GYTR accessories for the ultimate engine performance</li>
	<li>Requires use of minimum 112-octane racing fuel (if this head assembly is used without other engine modifications, 110-octane racing fuel can be used)</li>
</ul>

Requires stock cam gears (not included).

This accessory is restricted to closed-course competition use.&nbsp;

GYTR Race Camshaft Set provides added lift and duration over the YXZ’s stock camshaft.

&nbsp;

<ul>
	<li>High lift, REM-finished for ultimate durability</li>
	<li>Designed to be used with the stock valve train</li>
	<li>Included in the GYTR Race Cylinder Head Assembly, sold separately</li>
	<li>Requires the use of the Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
	<li>Requires use of minimum 112-octane racing fuel (octane requirement is dependent on engine configuration)</li>
</ul>

The GYTR High Compression Piston Set was designed by our very own engineering team. Countless hours of dyno work have led to the creation of this exclusive piston set for your YXZ. Utilizing proprietary data only known by our engineers, the GYTR High Compression Piston Set is for the serious racer looking for the ultimate performance! This kit includes piston rings, wrist pins, and clips.

<ul>
	<li>
	Shallow valve pockets for increased compression (13.5:1 piston only; 15:1 when installed with the GYTR Race Cylinder Head Assembly)
	</li>
	<li>
	Highly recommended to be used in conjunction with GYTR Full Exhaust System by Dasa Racing and GYTR Race Cylinder Head Assembly
	</li>
	<li>
	Under crown matching to keep consistent piston weights identical to stock weight to maintain perfect engine balance
	</li>
	<li>
	Requires the use of the Power Commander&reg; V by DynoJet Research&reg; and GYTR Race Connecting Rod Set, both sold separately
	</li>
	<li>
	Designed to be used with additional GYTR accessories for the ultimate engine performance
	</li>
	<li>
	Requires use of minimum 112-octane racing fuel
	</li>
</ul>

Yamaha is proud to announce our collaboration with Dasa Racing to offer the all-new GYTR Full Exhaust System for YXZ1000R models.

This top-of-the-line exhaust system utilizes three equal length stainless steel pipes beautifully TIG-welded in a true 3-pipe merge. The aluminum muffler housing is powder-coated in an exclusive smoke chrome finish with a machined endcap and GYTR emblem to provide additional style. Not only is this exhaust system unmatched in style and quality, it also gives you the performance gains and weight savings you demand in a closed course, race-only exhaust system.

<ul>
	<li>No unsightly MIG welds or stamped parts</li>
	<li>Stock Yamaha clamps and gaskets for the bead pipe and mid-pipe joint for added sealing and durability</li>
	<li>8 lb. lighter; 10% horsepower gain1 over the stock YXZ1000R system</li>
	<li>Includes spark arrestor</li>
	<li>Requires the use of Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
</ul>

Jam out to some tunes by easily pairing your phone with Bluetooth 5.0 for a long range wireless connection. Mountable virtually anywhere with universal attachment points and integrated threaded mounting holes.

Includes remote to control volume, play/pause, change track or easily adjust the LED Party Lights and LED Light Bar.&nbsp;

Features AM/FM and Bluetooth with built-in microphone for speakerphone calls. Aux-In port to play audio from a wired device, Aux-Out port to daisy chain to other wired speakers, and a 5V USB charge port to make sure your phone keeps the party going. Easily connect additional 12V accessories or soundbars with the 12V 10A auxiliary output connector. Huge sound in small package at only 25.5&rdquo; long x 4.5&rdquo; tall (6.5&rdquo; tall with mounts).

Includes 6&#39; fused power lead, auxiliary power out mating connector, 2x mounting brackets, adjustable clamps, RF remote and universal mounting hardware.

<ul>
	<li>EcoCast. Allows up to 100 soundbars to be connected together or connected to any ECOXGEAR speaker with the EcoCast feature</li>
	<li>RGB Party Lights. Choose from Red?Green/White/Blue Solid, Sync to Music</li>
	<li>Integrated LED Light Bar. 3 color options &nbsp;(red, white, dimmed white)</li>
	<li>500W Total Peak Power. 8 total speakers - Dual Woofers, 4 mid-range and 2 tweeters. Two independently sealed cavities for true left and right stereo sound</li>
	<li>IP66 rated with Marine-Grade Speakers. 100% water, dirt and dust proof enclosure</li>
</ul>

&nbsp;

Fitment. Universal for most 12V vehicles including golf cars, boats, side-by-side vehicles, and ATV&rsquo;s.

Requires. Custom mounting solution and wiring to 12V source.

Recommended. 48-12V Regulator Kit for 2017~ Drive2 AC Electric, #J0J-H1910-V0-00, sold separately

The center mount mirror features a large 3.8" x 10" convex mirror and plastic injection-molded bracket and mirror housing. Fully adjustable and works with Yamaha Genuine windshields and sun tops.

Use this bracket to mount the center mirror to your Yamaha side-by-side using the integrated flow drill holes already in the ROPS. Provides the optimal angle and view point for the center mirror.

&nbsp;

<ul>
	<li>
	All steel construction for durability and minimal vibration
	</li>
	<li>
	Exceptional rust and weather durability by being both e-coated and powder coated
	</li>
	<li>
	No drilling required
	</li>
	<li>
	All hardware included
	</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES