rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Techmount

Heater Craft

Magellan

Rekluse

Kolpin

EcoXGear®

Dynojet

Yamaha Genunine

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Storage

Audio and Tech

Lighting

Sun Tops

Performance

Mirrors

Overfenders & Flares

Electrical

Safety Gear

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$3,000.00 - $3,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Pounds: 2500

Pounds: 3500

Inch: 1.5

mm: 36

mm: 14

size

Size

color

Color

Scratch resistant Polycarbonate Windshield built for your Wolverine. Three secure airflow positions strike the right balance of comfort and protection.

Three positions (closed, vented or fully open) allow you to choose your preferred amount of airflow.

<ul>
	<li>
	&nbsp;Gas-assist struts and exclusive Yamaha-engineered latch system hold the window securely in all three positions
	</li>
	<li>
	Optical-grade 3/16-inch polycarbonate provides superior clarity and rigidity
	</li>
	<li>
	Hard coated on both sides for 300% more scratch resistance vs standard polycarbonate&nbsp;
	</li>
	<li>
	New silk-screened border provides a premium look&nbsp;
	</li>
</ul>

This 2nd Battery Kit enables the use of two batteries, saving the main battery for essential functions like starting. If both batteries need charging, the main battery is charged first. Kit mounts underneath the driver seat, making for a simpler electrical access point for all electrical connections.

<ul>
	<li>Includes cut-to-length wiring and mounting brackets</li>
	<li>No loss of cargo space as it mounts underneath the driver seat</li>
	<li>This &ldquo;Must Have&rdquo; accessory is a hand-picked, essential starting point when building your ultimate Wolverine.</li>
	<li>Battery not included. GS&reg; U1L-11 battery or equivalent recommended, sold separately. Please contact your local Yamaha dealer.</li>
</ul>

Can be installed in conjunction with the Cab Heater Kit #B4J-K75L0-V0-00 and Powered Subwoofer by SSV Works #B8K-H81D0-V0-00, both sold separately.

This 2nd Battery Kit enables the use of two batteries, saving the main battery for essential functions like starting. If both batteries need charging, the main battery is charged first. Use with 12 V accessories such as winches, lights, stereos and more.

&nbsp;

&bull; Waterproof design

&bull; Includes cut-to-length wiring and connectors

&bull; Includes a sealed 2nd battery

&bull; Easy to install

&bull; Can be mounted inside the accessory Rear Cargo Box #2HC-F83P0-V0-00, sold separately or alternatively, can be mounted directly in the bed using the accessory 2nd Battery Mount Kit #2HC-H212A-V0-00, sold separately which includes battery box

The GYTR YXZ 4-Point Harness combines the shoulder and lap belts for a secure seat restraint for your YXZ. The OEM-style buckle, durable shoulder padding and adjustable straps ensure maximum comfort and added confidence for long days riding. 

<ul>
	<li>Adjustable padded straps provide excellent comfort&nbsp;</li>
	<li>Styled to match the accessory Interior Padding Kit #B57-F11G0-V0-00, sold separately</li>
	<li>Retains operation of drivers side seatbelt indicator&nbsp;</li>
	<li>OEM-style buckle for ease of use&nbsp;</li>
	<li>Sold in pairs&nbsp;</li>
	<li>Complies with ANSI/ROHVA standards when installed with the GYTR Harness Mount&nbsp;</li>
</ul>

&nbsp;

When fitting to Model Year 2019, the accessory YXZ Harness Mount #B5H-F47K0-V0-00, sold separately) is required.

Yamaha is offering all the components of the Hard Cab Enclosure System separately for added customer convenience. An accessible cargo area is one of the key features of the fully functional Wolverine X2. The rear window features a pickup truck-style sliding glass window for added convenience and capability. The fully lockable window keeps your items secure from unwanted company. When paired with the Rear Cargo Box to maximize rear cargo space, you have a truly versatile package ready to conquer the outdoors!

<ul>
	<li>
	Included in the Hard Cab Enclosure System, sold separately
	</li>
	<li>
	Tinted glass window (window must be closed while in drive)
	</li>
	<li>
	Works perfectly with the Rear Cargo Box, sold separately
	</li>
</ul>

The Stealth Sound Bar Series by Wet Sounds™ represents the world’s first universal supercharged, plug-and-play sound system for your Yamaha Side-by-Side.

A collaboration with Wet Sounds.

Packed with a variety of features, this all-new sound bar is the perfect speaker for your high-performance audio system, whether you&rsquo;re blasting through a mudhole or cruising the dirt road. Powered by a 10-speaker, 300 W unit with eight 3&quot; full-range speakers, and a pair of 1&quot; titanium tweeters, this marine-rated speaker system pumps out plenty of rich, dynamic sound, while a built-in Class D amplifier pumps out up to 300 watts. And if you like bass, the built-in DSP amplifier with D-Bass Tech gives the Stealth 10 Ultra HD the outstanding low-end response you demand from any system.

<ul>
	<li>The patented design is built with a full extruded aluminum housing</li>
	<li>IP67 rated &mdash; protection from total dust ingress and water immersion between 15cm and 1m deep for 30 minutes.</li>
	<li>Powder-coated finish for additional durability and resistance from the elements</li>
	<li>Built-in Bluetooth&reg; connectivity with source control to stream your favorite music&mdash; you can control your sound while you drive with a wireless remote that mounts on your vehicle&#39;s steering wheel</li>
	<li>Includes waterproof connector, universal L-mount brackets for end cap mounting or sliding top mount channel system, auto turn-off feature to save battery life, backlit LED illuminated control panel, a fully integrated wiring harness, and 1.5&quot; clamps needed for installation</li>
	<li>Not designed to integrate with Yamaha&rsquo;s Factory Audio systems</li>
</ul>

Fits all Side-by-Side models

This versatile Yamaha Tailgate easily slides in and out of the cargo bed frame, allowing you to quickly remove it for large loads. Includes all necessary hardware to secure the tailgate to the cargo bed.

Yamaha is proud to announce our collaboration with Dasa Racing to offer the all-new GYTR Full Exhaust System for YXZ1000R models.

This top-of-the-line exhaust system utilizes three equal length stainless steel pipes beautifully TIG-welded in a true 3-pipe merge. The aluminum muffler housing is powder-coated in an exclusive smoke chrome finish with a machined endcap and GYTR emblem to provide additional style. Not only is this exhaust system unmatched in style and quality, it also gives you the performance gains and weight savings you demand in a closed course, race-only exhaust system.

<ul>
	<li>No unsightly MIG welds or stamped parts</li>
	<li>Stock Yamaha clamps and gaskets for the bead pipe and mid-pipe joint for added sealing and durability</li>
	<li>8 lb. lighter; 10% horsepower gain1 over the stock YXZ1000R system</li>
	<li>Includes spark arrestor</li>
	<li>Requires the use of Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
</ul>

Push through the debris on your ride while protecting your front end from major structural damage depending on the speed traveled and point of impact. 

The Yamaha Genuine Front Brush Guard not only protects critical components like the front grill and headlights but also enhances the overall styling of your Wolverine RMAX 1000 and is compatible with all Yamaha Genuine accessories.

<ul>
	<li>Complete front coverage that protects headlights and front body panels from trail debris</li>
	<li>All-steel 1.5&rdquo; tubing with E-Coated and powder coating that perfectly matches the RMAX</li>
	<li>Seamless modular installation with the OE Front Bar Carry</li>
	<li>Compatible with either Standard or Premium Front Grab Bars</li>
</ul>

Note: Requires trimming of XT-R and Limited Edition Front Bar Carry covers

Designed by Yamaha’s advanced team of engineers, the all-new Genuine Yamaha Technology Racing (GYTR) Turbo Kit is more powerful and easier to install than previous model years. The GYTR Turbo Kit uses the renowned Garrett GT2554R turbo to meet Yamaha’s highest standards of reliability, while power delivery is meticulously tuned to provide thrilling, confidence-inspiring performance for all drivers.

This kit is legal for sale in California under the California Air Resources Board executive order D-807U-4.

<ul>
	<li>
	Up to a 60% increase in peak power over stock
	</li>
	<li>
	High performance Garrett GT2554R liquid-cooled ball bearing turbo provides decreased spool time for broad power gains throughout the RPM range
	</li>
	<li>
	Pre-programmed, plug-and-play ECU delivers precise fuel injection settings, enhancing drivability across the entire RPM range for maximum power and maximum fun
	</li>
	<li>
	Large, highly efficient water-to-air intercooler is easier to install, while an integrated cooling fan increases charge-air cooling capacity and prevents heat soak when idling
	</li>
	<li>
	SAE 310S cast stainless steel exhaust manifold reduces weight and eases installation
	</li>
	<li>
	Lightweight molded-silicone intake is less susceptible to power-robbing &ldquo;heat soak&rdquo;
	</li>
	<li>
	The high flow air box located between the vehicle&rsquo;s occupants on the rear panel features a GYTR-branded lid, allows easy, tool-free air filter access, maximizes air intake, and minimizes water/dust intrusion
	</li>
	<li>
	Heightened &ldquo;turbo whistle&rdquo; sound for ultimate excitement
	</li>
	<li>
	Relocated water pump is easier to service, bleed and install
	</li>
	<li>
	Dealer installation recommended
	</li>
	<li>
	IMPORTANT: Requires the use of premium 91-octane gas
	</li>
</ul>

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

Increase the performance of your Yamaha Genuine Audio Kit with these Overhead Speakers. Mounted in a custom-tuned speaker pod that is designed to maximize the audio quality and to fit the Wolverine perfectly, these pods are a direct plug into the Yamaha Genuine audio system.

A collaboration with SSV Works.

<ul>
	<li>Two loaded 6.5&rdquo; Marine pod speakers</li>
	<li>Rugged, custom designed pods</li>
	<li>Plug-and-play wiring kit</li>
	<li>Great addition to the RMAX4 1000 factory audio kit</li>
	<li>Specifically designed with the Yamaha Genuine Suntop for perfect fit and finish</li>
</ul>

The Yamaha Genuine Snow Plow Mount easily attaches to the Wolverine RMAX 1000 without affecting terrain ability.

&nbsp;

<ul>
	<li>Easy-on, easy-off rapid connection system is located at the front of the vehicle, removing the need to crawl under the unit</li>
	<li>No need to remove mount during non-plowing seasons, ground clearance not affected</li>
	<li>Front-mount systems offer the highest blade lifting capability</li>
	<li>Compatible with WARN ProVantage Snow Plow components</li>
</ul>

This 10” powered subwoofer is designed to deliver the best sound quality and bass response.

<ul>
	<li>
	Features a modular design
	</li>
	<li>
	Fiberglass construction and marine-grade components withstand harsh trail conditions
	</li>
	<li>
	Includes housing, speaker, amplifier, and stainless steel mounting hardware
	</li>
	<li>
	Designed to be used with Overhead Audio System and Rear Speaker Pods (sold separately)
	</li>
	<li>
	Because Yamaha has the highest standard for our customers, we &ldquo;Highly Recommend&rdquo; using the 2nd Battery Kit or Alternator Kit (both sold separately) when installing multiple electronics on the YXZ1000R&trade; or YXZ1000R&trade; SS
	</li>
</ul>

NOTE: Cutting required; dealer installation recommended

These lightweight high-impact plastic (HWMPE) guards provide additional protection to the front A-Arms, steering and drive components.

<ul>
	<li>
	Ultra-thick and shatterproof to glide over obstacles
	</li>
	<li>
	Provides additional protection for CV boots
	</li>
	<li>
	Recessed stainless steel mounting hardware included
	</li>
	<li>
	No drilling required
	</li>
</ul>

Let's get loud. Turn the music on and hear the sound. Yamaha's engineers collaborated with SSV Works to engineer a custom-tuned audio kit with simple plug-and-play wiring and fit.  Bluetooth, Aux capabilities plus AM/FM sounds. Kit is expandable for enhanced sounds.

A collaboration with SSV Works.This custom audio kit that fits in the factory doors of your Wolverine. Utilizing custom-tuned speaker pods, factory mounting locations and simple plug-and-play wiring, you get the best sounding and best fitting audio system.&nbsp;

<ul>
	<li>
	Easy installation with integrated mount locations for a user-friendly and out-of-the-way design
	</li>
	<li>
	Bluetooth, AM, FM and dash-mounted AUX input-friendly
	</li>
	<li>
	Includes MRB3 head unit, 200w amp, wiring and two 6.5&rdquo; SSV marine grade speakers
	</li>
	<li>
	Compatible with all OEM doors and the Yamaha Hard Cab
	</li>
</ul>

&nbsp;

This system is even expandable when you add a powered subwoofer and additional speaker pods. Sold separately.

<ul>
	<li>
	4-Seat Overhead Speaker Pods #B4J-H81D0-V0-00
	</li>
	<li>
	Powered Subwoofer RMAX4/X4 #B4J-H81S0-V0-00
	</li>
	<li>
	Powered Subwoofer RMAX2/X2 #B8K-H81D0-V0-00
	</li>
	<li>
	Wolverine X2 850/Wolverine X4 850 requires Factory Audio Install Kit #BAR-H81M0-V0-00
	</li>
</ul>

The Soft Rear Window (which is included in the Soft Cab Enclosure System) is now available to purchase separately. Perfect for Wolverine X2 owners wanting added protection from wind, rain, and debris.

<ul>
	<li>
	Quick snap-on/pull-off installation
	</li>
	<li>
	Windows can be rolled up and secured with straps when not needed and to access the rear cargo area
	</li>
	<li>
	Made of durable Sur Last&reg; 300D and clear vinyl
	</li>
	<li>
	Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly
	</li>
	<li>
	Highly recommended to be used in conjunction with our accessory Polycarbonate Front Windshield or Hard Cab Enclosure System Glass Front Windshield with Wiper, both sold separately
	</li>
	<li>
	Requires Hard Sun Top Kit, sold separately
	</li>
	<li>
	All components are rust and UV-resistant
	</li>
</ul>

Note:

<ul>
	<li>
	Not compatible with accessory Hard Cab Enclosure System Doors, sold separately
	</li>
	<li>
	Dealer installation recommended (drilling and riveting required)
	</li>
</ul>

The Front Pod Light Mount Kit eases installation of up to four pod lights to the OE Front Grab Bar.

<ul>
	<li style="margin-left: 48px;">Multiple angle adjustments of pod light to meet lighting needs</li>
	<li style="margin-left: 48px;">Either one or two pod lights per mount</li>
	<li style="margin-left: 48px;">LE and XT-R models&#39; front grab bar allows installation of 4&nbsp;pod lights</li>
	<li style="margin-left: 48px;">With easy bolt-on, no modifications to the Front Grab Bar&nbsp;required</li>
	<li style="margin-left: 48px;">Allows for installation of 2 pod lights</li>
	<li style="margin-left: 48px;">Kit includes 2 brackets and necessary hardware</li>
</ul>

Note:&nbsp;

<ul>
	<li style="margin-left: 48px;">Recommended Flood Light Kit #2HC-H4104-L0-00,&nbsp;sold separately</li>
	<li style="margin-left: 48px;">Compatible with Accessory Front Grab Bar #B4J-F84L0-V0-00, sold separately</li>
</ul>

Nothing makes audio sound better than a Powered Subwoofer. This 8” Subwoofer is custom built to fit under the seat and is completely sealed and waterproof. With 200 watts of power, your friends will feel and hear you coming down the trail.

&nbsp;

<ul>
	<li>
	200 watt amp
	</li>
	<li>
	Custom designed 8&rdquo; sub with SMC sub enclosure
	</li>
	<li>
	Mounting location under driver&rsquo;s seat to maintain cargo space
	</li>
	<li>
	Prewiring included for all models equipped with factory audio system
	</li>
	<li>
	Compatible with Heater Kit and Second Battery Kit
	</li>
</ul>

The Thermostat By-Pass Heater Kit bypasses the thermostat to increase the heat of the cab while decreasing the time it takes to heat up. This kit can be used on all previous generation cab heater kits for the 850cc Wolverines.

&nbsp;

<ul>
	<li>Experience approximately a 20% increase in temperature output and a 40% decrease in warm-up time*</li>
	<li>Simply drain the coolant, install the kit and then refill the coolant system (refer to Service Manual)</li>
	<li>Cab Heater can remain in unit</li>
	<li>Incudes thermostat bypass and all needed hoses</li>
</ul>

* Based on unit warm up at 35&deg;F at idle

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES