rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Magellan

Assault Industries

Wet Sounds

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-By-Side: Pure Sport

Side-By-Side: Recreation

Side-By-Side: Utility

series

Series

Windshields & Wind Protection

Winches & Plows

Protection

Storage

Audio and Tech

Sun Tops

Lighting

Mirrors

Performance

Overfenders & Flares

Electrical

Safety Gear

Heated Accessories

Wheels & Tires

Audio

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$3,000.00 - $3,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Inch: 1.5

Pounds: 2500

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

The Overfenders seamlessly integrate with the Wolverine’s styling while protecting the front of the unit from mud, water and debris.

&nbsp;

<ul>
	<li>Integrated mounting points for simple installation</li>
	<li>Corrosion-resistant hardware</li>
</ul>

The GYTR® Multi-Stage Foam Air Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Yamalube® Bio-degradable Foam Air Filter Oil & Cleaner Kit or Foam Filter Oil.

The Accessory Power Lead Kit wires your preferred accessories to the unit’s five pre-wired switched 12vdc power couplers which are located under the dash of all Wolverine models.

<ul>
	<li>
	Kit includes components for up 5 accessories
	</li>
	<li>
	5 accessory leads
	</li>
	<li>
	10 heat shrink butt connectors
	</li>
	<li>
	No modification of OE wiring harness
	</li>
	<li>
	20 amp combined maximum
	</li>
</ul>

The new Yamaha Wolverine X4 850 Hard Rear Cab Door Kit provides top-tier OE styling and integration. Doors are designed to offer a factory-installed look while providing the highest levels of durability, function and fit.

<ul>
	<li>
	Tempered glass windows
	</li>
	<li>
	Three-position side windows range from the fully closed position, to vented position, to fully open position
	</li>
	<li>
	Inside and outside dual-cast door latches come equipped with key lock on the outside latch
	</li>
	<li>
	Integrated mounting points for easy installation
	</li>
	<li>
	Includes new door hinges&nbsp;
	</li>
	<li>
	Cab doors require the use of the Glass Windshield, Glass Rear Window and Sun Top
	</li>
</ul>

The Rhino Storage Cover helps protect your investment from the elements during times of storage.  Features the Rhino logo. Not designed for use while trailering.

Direct replacement for the wire rope of the WARN 4500 lb. winch.

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

The Wolverine Bed Extender fits all 2018 and older models. Solid steel construction provides 8 additional tie down points as well as additional storage area.

<ul>
	<li>
	117% increase in storage area behind the rear seats of Wolverine X4 and RMAX4 models when carrying passengers in the rear seats
	</li>
	<li>
	33% increase in storage area on Wolverine X2 and RMAX2 models
	</li>
	<li>
	Tool less removal and install with provided thumbscrews (after initial install is complete)
	</li>
</ul>

&nbsp;

Note: Not compatible with cargo box on RMAX4/X4

The Rhino Two-Piece Windshield is a convertible windshield which allows for increased airflow by simply swiveling the top section out, providing a wind break.

&nbsp;

<ul>
	<li>
	Full ventilation
	</li>
	<li>
	Top section can be completely removed with no need for tools
	</li>
	<li>
	Extra-thick 6mm polycarbonate construction &nbsp;
	</li>
	<li>
	Special scratch-resistant coating for ultimate durability
	</li>
	<li>
	Integrated mounting brackets for a finished look
	</li>
</ul>

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

Extended bed lighting with plug and play wiring. Amplify illumination with dual 5 watt LED lights.

&nbsp;

<ul>
	<li>Integrated mounts in both the OE Suntop and the Accessory Hard Rear Window Kit for easy installation</li>
	<li>Blue LED Backlit Rocker Switch matches OEM dash lights and mounts to integrated dash points</li>
</ul>

With top tier OE styling and integration, the Wolverine RMAX Hard Cab Rear Doors are designed for the highest level of durability, comfort and function.

<ul>
	<li>Tinted, tempered glass windows</li>
	<li>3-position side windows range from the fully closed position to the vented or fully open position</li>
	<li>Inside and outside dual-cast door latches with outside latch equipped with keyed lock</li>
	<li>Integrated mounting points for easy installation</li>
	<li>Includes new door hinges</li>
</ul>

 
For complete Hard Cab enclosure, requirements. All sold separately.&nbsp;

<ul>
	<li>Polyethylene SunTop #B4J-K84A0-V0-00</li>
	<li>Glass Windshield with Wiper and Washer System #B4J-F83J0-T0-00</li>
	<li>Hard Front Cab Door Kit #B4M-K85A0-V0-00</li>
	<li>Flip up Rear Glass Window #B4J-K750A-T0-00</li>
</ul>

The VRX Wiring Installation Kit includes everything needed to install a 2,500 or 3,500 pound VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
</ul>

For non-XT-R units, requires: Fairlead Mount #BAR-F28M0-V0-00 or Accessory Front Grab Bar #BAR-F84L0-V0-00, sold separately.

These simple yet durable modular rear speakers crank out quality sound and bass response.

<ul>
	<li>
	These speakers endure harsh conditions thanks to their marine-grade fiberglass construction
	</li>
	<li>
	Compatible and designed to be used with our Overhead Audio System and Powered Subwoofer (sold separately) or most other audio systems
	</li>
	<li>
	Set includes stainless steel mounting hardware
	</li>
	<li>
	Mounts behind driver and passenger utilizing the overhead protection bars
	</li>
	<li>
	Because Yamaha has the highest standard for our customers, we &ldquo;Highly Recommend&rdquo; using the 2nd Battery Kit or Alternator Kit (both sold separately) when installing multiple electronics on the YXZ1000R or YXZ1000R SS
	</li>
</ul>

NOTE for 2019 and newer models: Trimming required; dealer installation recommended. When installed in conjuction with accessory Rear Window, sold separately, the rear window will need to be trimmed for accurate fitment.

The Wolverine X2/X4 850 Folding Windshield provides protection and versatility when conditions change thanks to its handy folding design. Fold the hard-coated polycarbonate panels up or down to adjust for various climate conditions. 

<ul>
	<li>Provides protection from wind, rain, leaves, branches, brush, etc.</li>
	<li>Seamless integration with your Wolverine, utilizing the unit&rsquo;s windshield channel for outstanding sealing</li>
	<li>Hard Coated Poly Carbonate for superior scratch resistance</li>
	<li>Will not shatter like acrylic windshields</li>
	<li>Easy, tool-less removal for cleaning, maintenance, and versatility in different seasons and conditions</li>
	<li>Windshield is secured in the down position without the need to drill any holes in your body panels</li>
	<li>Injection-molded plastic tool-less clamps</li>
	<li>Works with Soft enclosure to create options as the days and conditions change.</li>
	<li>Includes one Rubber Pad and one Adhesive Pad</li>
</ul>

&nbsp;

Replacement Rubber Pad and Adhesive Pad available, sold separately (#B5H-K7240-V0-00)

Yamaha is proud to announce our collaboration with Dasa Racing to offer the all-new GYTR Full Exhaust System for YXZ1000R models.

This top-of-the-line exhaust system utilizes three equal length stainless steel pipes beautifully TIG-welded in a true 3-pipe merge. The aluminum muffler housing is powder-coated in an exclusive smoke chrome finish with a machined endcap and GYTR emblem to provide additional style. Not only is this exhaust system unmatched in style and quality, it also gives you the performance gains and weight savings you demand in a closed course, race-only exhaust system.

<ul>
	<li>No unsightly MIG welds or stamped parts</li>
	<li>Stock Yamaha clamps and gaskets for the bead pipe and mid-pipe joint for added sealing and durability</li>
	<li>8 lb. lighter; 10% horsepower gain1 over the stock YXZ1000R system</li>
	<li>Includes spark arrestor</li>
	<li>Requires the use of Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
</ul>

This 2nd Battery Kit enables the use of two batteries, saving the main battery for essential functions like starting. If both batteries need charging, the main battery is charged first. Use with 12 V accessories such as winches, lights, stereos, and more.

&nbsp;

&bull; Waterproof design

&bull; Includes cut-to-length wiring and connectors

&bull; Includes a sealed 2nd battery

&bull; Easy to install

&bull; Can be mounted inside the accessory Rear Cargo Box #2HC-F83P0-V0-00, sold separately or alternatively, can be mounted directly in the bed using the accessory 2nd Battery Mount Kit #2HC-H212A-V0-00, sold separately which includes battery box

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

The Rear Window is made of SurLast ® 70 all-weather, mildew and fade-resistant fabric with a clear 20-gauge polished vinyl window that will not yellow over time. Our window will provide years of added protection from wind, rain, and backwoods debris like brush and leaves.

<ul>
	<li>
	Anodized aluminum support bar
	</li>
	<li>
	Simple installation &ndash; secures with straps and zippers
	</li>
	<li>
	Designed to fit the Viking VI and not billow or rattle in most conditions
	</li>
	<li>
	Compatible with all Yamaha Genuine bed accessories
	</li>
</ul>

The stylish aluminum Front Bash Plate protects the Wolverine RMAX 1000 front drive components from trail debris.

&nbsp;

<ul>
	<li>
	Hybrid design of 1/8&rdquo; brushed aluminum and 1/8&rdquo; of E-Coated and power-coated steel reinforce the plate for increased durability
	</li>
	<li>
	Style complements the RMAX look
	</li>
	<li>
	Integrated mounting locations for easy installation
	</li>
	<li>
	Maintains full function of tie down points
	</li>
	<li>
	Compatible with the UHMW Skid Plates
	</li>
</ul>

Add an extra level of protection to your X2 1000 Front A-Arms with these Aluminum A-Arm guards that utilize factory mounting points for convenient installation to provide the fitment you expect from Yamaha Genuine Accessories.

<ul>
	<li>
	All aluminum construction 1/8&rdquo;
	</li>
	<li>
	Brushed finish to match our Acc front skid plate.
	</li>
	<li>
	Billet machine spacers are welded on to the guards to make installation fast and efficient.
	</li>
	<li>
	Recessed hardware provide a smooth surface&nbsp;
	</li>
	<li>
	Quick installation with no loose spacers and mounts to integrated points on the A-Arms
	</li>
	<li>
	Ease of self-draining and cleaning, accomplished with strategically positioned clean out port&nbsp;
	</li>
</ul>

Featuring injection-molded polypropylene construction, the Viking 3-Seater Molded Sun Top is built to withstand the conditions and provide shade and shelter from rain and backwoods debris like brush and leaves. Compatible with Cab Light.

The cargo bed box has approximately 21.4 gallons of cargo capacity and is constructed of tough, linear, low-density polyethylene. This cargo bed box securely carries your luggage when venturing out in your Wolverine.

&nbsp;

<ul>
	<li>Water and dust resistant</li>
	<li>Lockable lid (space for padlock &ndash; padlock not included)</li>
	<li>Simply replaces the stock tailgate</li>
	<li>No reflective surfaces</li>
	<li>Prevents cargo contamination</li>
	<li>Lid stays open past the 90&deg; angle position</li>
	<li>Easy access to cargo</li>
	<li>Security option for valuable items</li>
	<li>Great for hunters</li>
</ul>

This durable console is made of molded low density polyethylene (LDPE) for exceptional durability. 15.75"L x 11.81"W x 7.09"H

<ul>
	<li>Tongue-and-groove rubber gasket lid seal provides a dust and water resistant barrier for contents</li>
	<li>Easily mounts to the center seat location &mdash; no tools required</li>
	<li>Large stylized lid provides easy access to contents</li>
	<li>Console includes storage pocket and two cup holders (holds 12 oz. cans up to 20 oz. bottles)</li>
</ul>

The Front Winch Mount provides a secure location to install the Winch Fairlead on your Wolverine X2 and X4 stock Front Grab Bar.

A collaboration with WARN&reg;.

<ul>
	<li>Required when installing a winch on the OE Front Grab Bar</li>
	<li>Will accept all Winches sold by Yamaha</li>
	<li>Kit includes mounting plate and necessary hardware.</li>
	<li>Made of 3/16&quot; steel sheet metal with a black powder-coat finish</li>
</ul>

This mount is NOT needed when installing a winch on the Accessory Front Grab Bar #BAR-F84L0-V0-00.

This versatile Yamaha Tailgate easily slides in and out of the cargo bed frame, allowing you to quickly remove it for large loads. Includes all necessary hardware to secure the tailgate to the cargo bed.

Ideal for your ATV, Side by Side or boat. This new 4G design ball mount is designed to mount onto any flat surface at least 2"; around. The surface is sandwiched between the upper and lower plates.

In collaboration with Techmount.

Note: for use with Tech Gripper (sold separately)

The Rear Brush Guard is designed to protect your Wolverine X4’s back end while keeping the aggressive style of your side-by-side.

This tubular and plate steel Rear Brush Guard features six integrated mounting locations for a simple installation. The brush guard itself features mounting positions for Yamaha&rsquo;s Accessory Lights-Flood or Accessory Lights-Spot, both sold separately, letting you add lighting at the rear of the vehicle.

<ul>
	<li>
	Durable, rugged steel construction with a powder-coated finish
	</li>
	<li>
	Extends down the frame tube for additional coverage
	</li>
</ul>

Note: Cannot be used in conjunction with the Wolverine X4 Spare Tire Mount.

The Powered Subwoofer is designed to deliver heart-pounding bass response. It features a modular design, simple, plug-in installation, fiberglass construction, and marine-grade components to withstand harsh trail conditions.

<ul>
	<li>
	Includes housing, speaker, amplifier, and stainless steel mounting hardware&nbsp;
	</li>
	<li>
	For use with Overhead Audio System and Front Speaker Pods (sold separately)
	</li>
</ul>

Note: Cannot be installed in conjunction with Under Seat Storage Box (sold separately)

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES