rootCategory.golfcar.golfcar-accessories

Yamaha Genuine

Kenda

SSV Works

ATV TEK

Flow-Rite

Club Pro Products

Philadelphia Scientific

Millennia

Assault Industries

Club Clean

CIPA USA

Classic Accessories

Eagle

Grant

EcoXGear®

Black

Silver

Black Satin

Black Machine

Taupe

Gray

Beige

Gold

Smoke

Brown

Silver Machine

White

Clear

Black Satin with Machine Groove

Bronze

Black/Bronze

Bronze with Machine Groove

Gunmetal

Carbon Fiber

Black Gloss with Machine Edge

Linen

Sand

Golf Car

series

Series

Lighting

Windshields & Wind Protection

Wheels & Tires

Batteries & Chargers

Golf Accessories

Audio and Tech

Protection

Storage

Overfenders & Flares

Coolers

Trim & Accents

Covers

Electrical

Mirrors

Seats

Graphics, Stickers & Decals

Heated Accessories

Sun Tops

Luggage

Tune-Up Kits

Audio

Gauges & Displays

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$4,000.00 - $4,999.99

price

Price

brand

Brand

Inch: 1.5

Inch: 1

size

Size

color

Color

SSV Works’ new Premium 6.5” Marine-Grade Weatherproof Speakers will transform the sound of your golf car stereo!

A collaboration with SSV Works.

Get louder, cleaner sound. Engineered specifically for open air environments, the new WP-A6 weatherproof speaker brings audiophile-grade components to the outdoors. The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard while crusin&rsquo; with the family. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low-profile with optimal weatherproofing. SSV Works WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps. Reliability meets control with the Santoprene surround; a 30% lighter thermoplastic elastomer surrounding the polypropylene cone for exceptional volume and clarity in the harshest conditions.

 
The SSV Works WP-A6 speaker features a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter what music you listen to, your speakers will keep on rockin&rsquo; with 4ohms and 60w RMS/120w peak power. Covered by SSV Works&rsquo; limited 1-Year warranty. Kit includes pair of loaded pods with WP-A6 speaker, pair of 1&quot; square clamps, short extension harness, speaker Y-harness, and all mounting hardware. Custom wiring may be required. Professional installation recommended.

&nbsp;

Quick, Simple Installation

<ul>
	<li>Direct plug-and-play into the SSV Works MRB3 and MRB2 head units</li>
	<li>Universal harness length for a variety of configurations 
	&nbsp;</li>
</ul>

Aluminum Dual-Clamp Mounting System

<ul>
	<li>Adjustable mount for forward or rear-facing</li>
	<li>Powder-coated for durability</li>
	<li>Stainless-Steel Hardware</li>
</ul>

SSV Works A6 Speaker

<ul>
	<li>Matches Yamaha Overhead Audio System by SSV Works</li>
	<li>Fully weatherproof</li>
</ul>

&nbsp;

Requires:&nbsp;

<ul>
	<li>Requires SSV Works Overhead Audio System #J0G-H81C0-V0-00, or SSV Works MRB2/MRB3 head unit, sold separately</li>
</ul>

 
Recommended:

<ul>
	<li>Complete the audio package with our 10&quot; 500W Powered Subwoofer by SSV Works #J0D-H81S0-V0-00</li>
</ul>

Need more bass in your space? SSV Works Premium Marine Subwoofer started the revolution. They produce great volume and clarity designed for the outdoor environment for the powersport enthusiast.

A collaboration with SSV Works.

Amplified subwoofer system expands your Overhead Audio Kit, #J0G-H81C0-V0-00 (sold separately) with an easy plug and play solution.

 
SSV Works custom molded sub enclosure is designed specifically for the SSV-10M 10&rdquo; 600-watt (300w RMS) subwoofer to pair perfectly with SSV Work&rsquo;s 500-watt powered amplifier engineered for optimal performance in a small, compact package. Easily installs in bag well area and even works with most rear seat kits. Includes additional mount plates and hardware to a ensure rigid mounting system to eliminate movement for bass that you can feel. Enclosure is thick roto-molded plastic for the best sound quality and bass response. Finished in a black texture coat for high quality appearance to match factory OE plastic components. Covered by SSV Works&rsquo; limited 1-Year warranty.

 
Kit includes powder-coated golf car bagwell mounting brackets, subwoofer extension harness, fused power harness, all mounting hardware and step-by-step installation instructions. Custom wiring may be required. Professional installation recommended.

 
Plug-and-play with any of SSV Works&rsquo; MBR2 or MBR3 media-receivers. Ability for custom subwoofer solution with full compatibility with marine-grade amps with 4v low-level RCA inputs (speaker to RCA adapter required, sold separately). Innovative sub enclosure mounts and pre-thread nutserts provide options for universal mounting for custom applications.

&nbsp;

Quick, Simple Installation

<ul>
	<li>Direct plug-and-play into the SSV Works MRB3 and MRB2 head units</li>
	<li>Universal harness length for a variety of configurations</li>
</ul>

 
Power-coated Steel Mounting System

<ul>
	<li>Utilizes factory bagwell mounts</li>
	<li>4 mounting tabs included for additional mounting options</li>
	<li>Powder-coated for durability</li>
</ul>

 
SSV Works WP-10M Subwoofer

<ul>
	<li>600-watt peak / 300-watt RMS</li>
	<li>0.5 ohm ultra-efficient</li>
</ul>

 
SSV Works 500-watt powered amplifier

<ul>
	<li>Built-in gain control</li>
	<li>Switchable frequency 50/100/150Hz</li>
</ul>

&nbsp;

Requires: 
Requires SSV Works Overhead Audio-System #J0G-H81C0-V0-00, or SSV Works MRB3 or SSV Works MRB2 head unit, sold separately. Electric models require 48Vdc Input to 12Vdc Output converter capable of supplying 16A Constant (20A Peak) 12V power. Not available through Yamaha. Contact local dealer for custom installation requirements.

 
Recommended: 
Complete the audio package with our 6.5&rdquo; Speaker Pod Kit by SSV Works, #J0D-H81D0-V0-00.

Experience easier entry and exit while adding protection for on- and off-course ventures. Designed to seamlessly integrate with the underside of the footrest and protect the side sill all while complementing the style of the UMAX&rsquo;s aggressively edgy look.
<ul>
<li>Manufactured from welded steel</li>
<li>Textured, black, e-coat, powder-coated finish that matches arm rests and sun top supports</li>
<li>Supports up to 300 lb. (136kg)</li>
<li>Includes side steps, mounting hardware, and detailed installation instructions</li>
<li>(Installation Note: Works with factory 20" tires. Will not work with oversized tires).</li>
</ul>
WARNING: This product may expose you to chemicals, including lead, which is known by the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to: <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

Guard you and your UMAX from even more debris with our wide, off-road, fender flare kit designed and engineered to perfectly match your Yamaha in every way.&nbsp;
<ul>
<li>Durable, textured surface matches grill and dash</li>
<li>Mounts with TUFLOK&reg; rivets for secure attachment</li>
<li>Extends fender by 2"</li>
<li>Durable 4mm-thermoformed construction</li>
<li>Constructed of tough HMWPE plastic</li>
<li>Installation notes:
<ul>
<li>Drilling of fenders required for installation</li>
<li>Trimming of fenders recommended for installation</li>
</ul>
</li>
</ul>

Defend yourself and your UMAX against mud, water, and debris with this four-piece kit. Designed to integrate perfectly with the hard-work-ready look and feel of your UMAX; and makes for the perfect complement to the 20" x 10" turf tires.
<ul>
<li>Durable, textured surface matches UMAX grill, dash, bed cover, plates, beverage holder, and sun top.</li>
<li>Mounts with TUFLOK&reg; rivets for secure attachment</li>
<li>Extends fender by 1.5"</li>
<li>Constructed of tough HMWPE plastic</li>
<li>Durable, 4mm-thermoformed construction</li>
<li>Drilling of fenders required for installation</li>
</ul>

Adds amber chip-on-board (COB) front turn signals, 20-LED rear brake/ tail/ turn lights, and 4-way flashers.

Includes premium automotive style turn signal switch/ module and brake switch with all brackets and hardware.

Guard your UMAX from the elements during storage. We teamed up with Classic Accessories® to create the best storage cover tailored to perfectly fit your new UMAX.

&nbsp;

<ul>
	<li>Secures to the unit with elastic around the perimeter of the bottom edge</li>
	<li>Cover fits over Front Brush Guard, Rear Brush Guards, and fender flares (deFender Jr. and deFender (each sold separately)</li>
	<li>Solution-dyed (renown as the best method of dyeing; the dye solution is 100% permeated through the thread, not just on the surface)</li>
	<li>More fade-resistant</li>
	<li>More water-resistant</li>
	<li>More resistant to the elements</li>
	<li>More mildew-resistant</li>
	<li>Up to 600 hours of color fastness (vs. 40 hours of color fastness of competitors)</li>
</ul>

PRO TIP! The Storage Cover is non-branded so you can easily use it across any/all your stocked utility vehicles. (Universal 2-Passenger Utility Vehicle size, 125&quot; L x 52&quot; W x 68&quot; H).

Increase the visibility of your UMAX when operating at night or in low-light conditions by adding these LED taillights.<ul><li>Molded-in, factory recess for easy installation</li><li>Meets ANSI/ILTVA Z135-2012 and SAE J586 and SAE J588</li><li>0.46 A/light at 13.8v or 0.35 A at 12v</li><li>38 SMD® LEDs (each light)</li><li>LED IP-Rating – IP67</li><li>Bezel and housing made from polycarbonate (virtually indestructible)</li><li>Integrated GORE-TEX® patch to prevent moisture and condensation</li><li>All parts are injection-molded for an exact fit</li></ul>&nbsp;Note:&nbsp;Stop and turn signal functions require the Premium Upgrade Light Kit (J0G-H4503-T0-00) or the Ultra-Premium Upgrade Light Kit (J0G-H4503-S0-00), both sold separately. Taillights are included in both upgrade kits.

Customize your DRIVE2 golf car with Yamaha designed, projector LED headlights. The standard kit adds factory LED headlights and incandescent taillights, horn, and side reflectors via a non-expandable standard harness.

&nbsp;

Yamaha Genuine Light Kits are designed by Yamaha engineers to precisely fit each model. Kits include all necessary mounting hardware. Electric kits include a 48V regulator.

<h2>YAMAHA GENUINE LIGHT KIT ADVANTAGE</h2>

<ul>
	<li>
	Yamaha designed projector LED headlight with ultra-low energy consumption and 40,000 hour life expectancy
	</li>
	<li>
	LED headlight has geometrically tuned reflector for long range and increased output
	</li>
	<li>
	LED headlight has 613% larger light field, double the brightness and 54% improvement in energy consumption over previous halogen headlight
	</li>
	<li>
	All Yamaha light kits include all necessary mounting hardware and detailed instructions with pictures
	</li>
	<li>
	All Fleet electric kits include required 48V regulator
	</li>
	<li>
	All Fleet kits include horn and horn switch
	</li>
</ul>

<h2>YAMAHA GENUINE LIGHT KIT ADVANTAGE</h2>

<ul>
	<li>
	Plug-and-play installation
	</li>
	<li>
	Precut to exact length with sealed, factory connectors
	</li>
	<li>
	No cutting, splicing, crimping or modifications required
	</li>
	<li>
	Factory weather-tight, sealed connectors
	</li>
	<li>
	Constructed of 16-gauge and 18-gauge wire
	</li>
	<li>
	Fully wrapped corrugated tubing and tape at all joints and ends
	</li>
	<li>
	Sealed splices with heat shrink
	</li>
	<li>
	Each harness tested for continuity, opens, and shorts
	</li>
	<li>
	Made in U.S.A.
	</li>
</ul>

Tackle rugged terrain with more confidence after installing our Rear Arm Skid Plate to help guard against large rocks and other obstructive debris from harming your transaxle—all while perfecting your UMAX’s tough styling.

&nbsp;

<ul>
	<li>Can be installed in conjunction with the factory lower rear arm cover</li>
	<li>Uses factory mounting locations</li>
	<li>Includes all necessary hardware</li>
	<li>High-tech, one-piece design with a powder-coated finish</li>
	<li>Constructed of strong, lightweight, mild steel sheet metal</li>
</ul>

You&rsquo;ve got a long workday planned. Leave none of your essentials behind with our heavy-duty, durable cargo box that doubles as a non-insulated cooler featuring an integrated drain plug. You&rsquo;ll enjoy easy installation and optimum box capacity while matching your UMAX&rsquo;s uniquely rugged style.

<ul>
	<li>Works great with or without the UMAX Cargo Bed Mat, sold separately</li>
	<li>Water- and dust-resistant, sealed lids utilize rubber ball-and-socket straps</li>
	<li>Includes cargo box, mounting hardware, and detailed installation instructions</li>
</ul>

Put a soundtrack to your day with our Yamaha Genuine Bluetooth Audio System specifically made for your gas-powered DRIVE or Drive2. Conveniently play your favorite playlists from your phone as you cruise around town to neighborhood locales. 

A collaboration with Milennia.

<ul>
	<li>
	Exclusive plug-and-play power and speaker harnesses
	</li>
	<li>
	Precut to exact length (no cutting, splicing, or crimping required)
	</li>
	<li>
	Conformal coating on circuit board protects from moisture, dust, chemicals, and extreme temperatures
	</li>
	<li>
	Includes Bluetooth&reg; amp, two 3.5-in. two-way 4ohm, 50 W outdoor speakers, plug-and-play harness, stainless steel hardware and detailed installation instructions.
	</li>
</ul>

NOTE: This accessory only fits gas DRIVE and Drive2 Fleet models.

Help prevent damage to your rear and side panels all while perfectly matching the body lines of your UMAX with our Rear Tubular Brush Guard.
<ul>
<li>Retains full access to factory 2" receiver:</li>
<li>Maintains utility versatility</li>
<li>Towing capable</li>
<li>No interference with UMAX One tilting bed and fold-down tailgate functions. (Interferes with UMAX Two models&rsquo; bed-lift functions.)</li>
<li>Two locations for mounting points:</li>
<li>Stronger durability with two mounting locations</li>
<li>Pre-drilled factory holes enable easy mounting into frame rail</li>
<li>Four bolts for a sturdier hold that prevents wobbling</li>
<li>E-coat and satin, black, powder-coated finish</li>
<li>Durable 1" and 1.5" bent steel tubing construction fits a wide variety of mounts to add additional lighting</li>
<li>Strong 3mm-thick mounting tabs</li>
<li>Durable, textured surface matches roof support and arm rests</li>
<li>Accepts most straight and drop-hitch ball mounts</li>
<li>Includes rear brush guard, mounting hardware, and detailed installation instructions</li>
</ul>
WARNING: This product may expose you to chemicals, including lead, which is known by the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to: <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

Numbers for cars are available from 1 to 200 (sold in pairs). The number desired is included at the end of the part number. 3-year limited warranty included. Universal fit for most golf cars.

V-Series alloy wheel assembly features the Kenda Kruizer KR20A tire, the golf car industry's first true automotive steel-belted radial design tire specifically designed for Low Speed (LSV) and Personal Transportation Vehicles (PTV) that are approved to be used on golf courses and in golf course communities. Combined with the all-new V-Series alloy wheel by Wheel Mate Products for the ultimate driving experience.

Helps protect golf cars from harsh elements such as sun, weather and dirt. Weather protected fabric won’t shrink or stretch. 

A collaboration with Classic Accessories.&nbsp;Universal fit for most golf cars.

<ul>
	<li>
	Storage cover features rear access zipper for easy entry and installation.
	</li>
	<li>
	Elasticized cord in bottom hem for a custom fit.
	</li>
	<li>
	Rear air vents incorporated in cover to reduce wind lofting and inside moisture.
	</li>
	<li>
	Tough fabric treated for maximum water resistance and repellency.
	</li>
	<li>
	Includes integrated stuff sack.
	</li>
</ul>

&nbsp;

The Yamaha Over-the-Top Enclosures has been precision engineered for a custom fit for each sun top. Features an over-the-top, trackless style design.

&nbsp;

<ul>
	<li>Installation is quick and easy with no tracks or hardware to install. No modification or drilling required. Can be installed and removed in minutes.</li>
	<li>No unsightly tracks when enclosure is removed from car. Can be moved from unit to unit without any hassle.</li>
	<li>Attaches to front support with wrap around hook-and-loop front sleeves. Securely fastens to bottom of unit with adjustable, hook-and-loop straps. The rear of the enclosure fastens to the underside of the sun top with hook-and-loop straps.</li>
	<li>Features heat-welded seams between the clear vinyl and side panels.</li>
	<li>Available in heavy duty, marine-grade, 1300D vinyl or marine-grade, 600D, 100% solution-dyed polyester fabric. Both materials are UV and mildew/mold resistant.&nbsp;</li>
	<li>Replacement Straps and J-Hooks Available, see Specification Tab</li>
</ul>

Note: Over-the-Top Enclosures cannot be used with The Drive Club Cover

Give your car a unique look and more luxurious feel by replacing your original seats with these stylish, upgraded touring seats, available in four eye-catching colors&mdash;gray, beige, brown, and black&mdash;complete with contrast stitching and embossed tuning fork logos.
Our proprietary Yamaha-spec vinyl is designed to exceed accessory testing requirements, providing superior durability against vibration, heat aging, and more.
These seats feature an OEM plastic seat base, large bolstering to keep occupants securely in place, plus increased foam thickness and softness&mdash;all while retaining Yamaha QuieTech technology.
<ul>
<li>Uses OEM plastic seat base - No wood here!</li>
<li>Retains Yamaha QuieTech technology</li>
<li>Large bolstering for bucket-like seat comfort</li>
<li>Increased foam thickness and softness</li>
<li>Largest occupant seating area</li>
<li>Virgin molded, dual-density foam</li>
<li>Designed by in-house styling team to precisely match unit styling</li>
<li>Cut &amp; Sew manufacturing with double-French seam stitching</li>
<li>Stitching all taped with water-resistant tape on underside to prevent foam absorbing moisture</li>
<li>Exceeds Yamaha's stringent testing requirements for durability and UV protection</li>
<li>Industry Leading 3-Year Limited Genuine Accessory Warranty</li>
</ul>

These 1.5” clamps allow you to rigidly mount additional accessories (that use 6mm bolts) to the overhead frame tubes (directly beneath top).

&nbsp;

<ul>
	<li>Perfect for the Accessory Light Kits</li>
	<li>Black anodized aluminum material for long-lasting durability</li>
</ul>

The 4-1/8" x 7-3/4" convex mirror comes with 1" square bar clamps to fit many golf cars.

Breakaway feature helps eliminate damage. Made with durable ABS plastic. Ball-and-socket joint for easy adjustment. Fits either right or left side; sold individually. Universal fit for most golf cars with flat 1&rdquo;-square mounting surface, or &frac34;&rdquo;-square when included rubber insert used.

Fleet numbers are available in multi-packs to sequentially label 10 cars (packed in pairs). The part number includes the multiple of 10 for each particular series (up to 200). 3-year limited warranty included. Universal fit for most golf cars.

Our proprietary Yamaha-spec vinyl is mold and mildew-resistant and designed to exceed accessory testing requirements, providing superior durability against vibration, heat aging, wear, and weatherability.

These seats feature an OEM plastic seat base, large bolstering to keep occupants securely in place, plus increased foam thickness and softness.

&bull; Uses OEM plastic seat bases

&bull; Large bolstering for bucket-like seat comfort

&bull; Increased foam thickness and softness

&bull; Largest occupant seating area

&bull; Virgin molded, dual-density foam

&bull; Designed by in-house styling team to precisely match unit styling

&bull; Cut &amp; Sew manufacturing with double-French seam stitching

&bull; Stitching all taped with water-resistant tape on underside to prevent foam absorbing moisture

&bull; Exceeds Yamaha&rsquo;s stringent testing requirements for durability and UV protection

&bull; Industry-leading 3-Year Limited Genuine Accessory Warranty

&nbsp;

Seat bottom and back sold separately, available as complete set by ordering: J0B-K8410-V0-00 (Beige), J0B-K8410-T0-00 (Black), J0B-K8410-S0-00 (Brown), J0B-K8410-R0-00 (Gray).

Reuses OEM, factory seats mounting hardware, seat hinges and arm rests.

Venture on and off the trail with the added protection of one of our Front Brush Guards that seamlessly integrates with the front profile of your UMAX. Additionally, protect the bold look of the grill, hood, and cowl longer.
<ul>
<li>E-coat and satin, black powder-coated finish with a durable, textured surface that matches roof supports and arm rests</li>
<li>Easily mounts to frame rail using four bolts</li>
<li>Reuses skid plate</li>
<li>Pre-drilled holes for easy installation</li>
<li>Durable, 1.5" bent steel tubing construction that accommodates a wide variety of mounts (to add auxiliary lighting)</li>
<li>3mm-thick mounting tabs allow for the addition of auxiliary lights</li>
<li>Includes front brush guard, mounting hardware, and detailed installation instructions</li>
</ul>
WARNING: This product may expose you to chemicals, including lead, which is known by the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to: <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

These heated seat covers are the epitome of passenger comfort for cold weather conditions.

&nbsp;

<ul>
	<li>Constructed of tough, durable, 600 denier, solution-dyed fabric</li>
	<li>Controller simply plugs into the AC outlet</li>
	<li>Hook-and-loop attachment straps</li>
	<li>Automatic 15 minute shut-off safety feature</li>
	<li>Sold individually</li>
	<li>See Specification Tab for approximate temperatures</li>
</ul>

J-Series alloy wheel assembly features the Kenda® Kruizer KR20A tire, the golf car industries first “True Automotive Steel-Belted Radial Design” tire specifically designed for Low Speed (LSV) and Personal Transportation Vehicle (PTV) approved for golf courses and communities.

The Kenda&reg; KR20A tire&rsquo;s high-performance directional tread pattern enhances steering and ride performance. Industry leading steel-belted radial tire construction has improved rolling and wear characteristics giving longer life over less expensive bias-ply tires. Combine with the all-new J-Series alloy wheel by Wheel Mate&reg; &nbsp;Premium Golf Cart Wheels for the ultimate driving experience. Sold individually.

&nbsp;

<ul>
	<li>Machine finishes include chrome lug nuts, valve stem, chrome valve stem cover, chrome valve stem cap, and Yamaha Tuning Fork logo on chrome center cap.</li>
	<li>Satin Black finishes include satin black lug nuts, black valve stem, black valve stem cap, and Yamaha Tuning Fork logo on satin black center cap.</li>
</ul>

&nbsp;

Rim Features:

<ul>
	<li>Symmetrical beveled spokes for a sophisticated full-face design</li>
	<li>Deep lug nut pockets for luxurious appearance</li>
	<li>Made from 100%-virgin aluminum ingots</li>
	<li>Clear-coated to protect finish</li>
	<li>Lightweight construction for reduced rolling resistance</li>
	<li>Stealth, snap-in center cap design with Yamaha Tuning Fork Emblem</li>
</ul>

&nbsp;

Steel-Belted Radial Tire Benefits:

<ul>
	<li>Proprietary tire compound for decreased tire wear</li>
	<li>Improved ride performance</li>
	<li>Improved rolling characteristics for extended range</li>
	<li>Improved tread pattern for maximum smoothness</li>
	<li>High-performance directional tread pattern enhances performance and steering</li>
	<li>E-Marked and Reach Compliant for international markets requirements</li>
</ul>

Constructed of extra-thick, 6mm polycarbonate, with a special coating that helps provide abrasion and UV-resistance for added durability and weather resistance.

Make your Drive2 as comfortable as your family car with our rubber-backed floorboard carpet set that is extremely durable and features our embroidered Yamaha logo. Made of an all-weather UV material that is sun, water, and salt-resistant for the ultimate protection.
<ul>
<li>Sun-, water-, and salt-resistant</li>
<li>Carpet and logo are fade-resistant</li>
<li>Mold-, mildew-, and stain-resistant</li>
<li>Easy to clean with mild detergent</li>
<li>Rubber backing for skid resistance</li>
<li>Computer-cut for the most precise fit</li>
<li>Includes front passenger compartment and rear bagwell carpet set</li>
</ul>

This easy, direct replacement wheel assembly
includes a mounted Kenda� Loadstar 205/65-
10 tire with chrome lug nuts. Also includes
center cap and valve stems.

Have a precisely engineered, custom-fitted sun top to keep cool and comfortable while cruising around your community. With an over-the-top, trackless design installation is quick and easy so you can seamlessly move it from car to car without hassle.

<ul>
	<li>Securely fastens with hook-and-loop straps</li>
	<li>Heat-welded seams between the clear vinyl and side panels</li>
	<li>Available in heavy duty, marine-grade, 1300D vinyl or marine-grade, 600D, 100% solution-dyed polyester fabric</li>
	<li>UV- and mildew-/mold-resistant</li>
	<li>Limited one-year warranty for vinyl (two years for fabric)</li>
</ul>

&nbsp;

Note: Over-the-top enclosures cannot be used with DRIVE Club Cover #GCA-JW160-14-SD or Cabana Bag Cover(s) #GCA-J0A60-00-00/#GCA-J0A60-00-BK, all sold separately

&nbsp;

Available Colors/Fabrics

<ul>
	<li>GCA-J0A65-00-SD Taupe Fabric</li>
	<li>GCA-J0A65-00-00 White Vinyl</li>
	<li>GCA-J0A65-00-LN Acrylic/Linen</li>
</ul>

Add the options for high- or low-beam lighting with our Headlight High/Low Switch. With easy plug-and-play installation in the front dash panel, it will seamlessly match the factory headlight on/off switch.
<ul>
<li>Rated 20 A at 12v DC</li>
<li>Extremely long life with 50,000 &ndash; 100,000 on/off cycles</li>
<li>IP66/68-rated for front panel components</li>
<li>Silver Plated Butt Contact Mechanism exceeds ASTM B-827, B-845 for Silver and Gold contacts</li>
<li>Switch is vibration-, shock-, thermoshock-, moisture-, and salt spray-resistant</li>
<li>Dual Seal Protection seals out water, dust, and debris</li>
<li>Blue LED illumination with high-beam indicator icon</li>
<li>Fits standard opening (21mm x 36.83mm)</li>
<li>Includes pre-terminated wiring for true plug-and-play installation</li>
</ul>
&nbsp;
NOTE: Will not work with Premium or Ultra-Premium Light Upgrade Kits.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES