rootCategory.atv

Yamaha Genuine

Yamalube

GYTR

Warn

NOCO

ATV TEK

Heat Demon

Magellan

Techmount

Cycle Country

Matrix Concepts

Erickson

PIAA

EcoXGear®

Dynojet

Adventure

Black

Blue

Silver

Gray/White

Charcoal/White

Olive

Black/Tan

Red/Black

Blue/White

Black/White

White

Brown/Green

Green

Green/Yellow

ATV: Sport

ATV: Utility

series

Series

Protection

Winches & Plows

Performance

Batteries & Chargers

Storage

Lubricants & Greases

Maintenance

Handlebars & Controls

Service Parts

Straps & Tie Downs

Quality Care

Graphic Tees - Short Sleeve

Air Filter

Luggage

Audio and Tech

Adhesives

Mineral

Oil Change Kits

Tools

Covers

Overfenders & Flares

Miscellaneous

Full-Synthetic

Additives

Lighting

Synthetic Blend

Heated Accessories

Audio

Bumpers, Grab Bars & Hitches

2-Stroke Engine Oil

Graphic Tees - Long Sleeve

Hoodies & Fleece

Hats

Windshields & Wind Protection

Beanies

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

$900.00 - $999.99

price

Price

brand

Brand

collection

Collection

Quart: 1

Gallon: 1

3X-Large

Small

Large

Medium

X-Large

2X-Large

Ounces: 12

Inch: 48

One Size Adult

Ounces: 10.5

Ounces: 8

Ounces: 12.5

Gallons: 5

Pounds: 2500

Pounds: 4500

Pounds: 3500

mm: 36

Ounces: 11

Inch: 1

mm: 14

Ounces: 3.2

Ounces: 16

Ounces: 14

size

Size

color

Color

GYTR Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection.

Service with Yamaha Genuine Foam Filter Oil available from your Yamaha dealer.

Not for use with GYTR Billet Air Filter Adaptor Plate.

This lightweight, 0.25"-thick polyurethane/plastic construction is much lighter than standard aluminum skid plates and helps protect frame, engine, and chassis components. The plate provides a smooth, slick surface so the ATV can “glide” over track obstacles.

NOTE: Cannot be installed in conjunction with Aluminum Engine/ Frame Skid Plate.

Designed to attach to the accessory GYTR Footwells. Made from high-impact plastic.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

GYTR&reg; Billet Air Filter Adaptor Plate required for installation.&nbsp;

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances.

Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

&nbsp;

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc.

The 520 GTS2 offers the same exceptional &quot;X-Ring&quot; features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.

Note FZ1, YZF-R6, and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 1200cc</li>
	<li>Rivet-type master link included</li>
	<li>Replacement rivet-type master link also available, sold separately</li>
	<li>Tensile strength = 9,400lbs</li>
	<li>120 links</li>
	<li>Gold colored chain and links</li>
</ul>

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

Guard your Grizzly with this Engine Skid and Front Bash Plate combination. The bash plate is designed to protect your Grizzly on any terrain.

The NOCO GENIUS5 is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 5 amps for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deep-cycle batteries.

A collaboration with NOCO.&nbsp;Good for charging 12V batteries quickly. Optimal for use with multiple units or vehicles without movement or use. Can be used for maintenace (trickle) charging.&nbsp;

<ul>
	<li>
	5 amp charging capacity great for jobs that require fast battery charging
	</li>
	<li>
	5x faster than GENIUS1
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The NOCO GENIUS2X4 is a 6-volt and 12-volt 4-bank battery charger, battery maintainer, trickle charger and battery desulfator. It's rated at 8 amps (2 amps per bank) for all types of lead-acid and lithium-ion batteries including flooded, gel, AGM, marine and deep-cycle batteries.

A collaboration with NOCO.&nbsp;Easily charge up to four units parked near each other.

<ul>
	<li>
	2 amp charging capacity per bank is great for multi-battery charging jobs that require quick battery charging
	</li>
	<li>
	2X faster than GENIUS1
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The NOCO GENIUS2X2 is a 6-volt and 12-volt 2-bank battery charger, battery maintainer, trickle charger and battery desulfator. It's rated at 4 amps (2 amps per bank) for all types of lead-acid and lithium-ion batteries including flooded, gel, AGM, marine and deep-cycle batteries.

A collaboration with NOCO.&nbsp;Easily charge two units parked near each other.

<ul>
	<li>
	2 amp charging capacity per bank is great for multi-battery charging jobs that require quick battery charging
	</li>
	<li>
	2X faster than GENIUS1
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging
	</li>
</ul>

The NOCO GENIUS1 is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 1 amp for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deep-cycle batteries.

A collaboration with NOCO.&nbsp;Perfect for offseason maintenance (trickle) charging.&nbsp;

&nbsp;

<ul>
	<li>1 amp charging capacity is great for overnight charges and battery maintenance</li>
	<li>
	Charge dead batteries down to zero volts
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The NOCO Genius GEN5X1 is a single-bank waterproof onboard battery charger rated at 5 amps for 12-volt batteries including Side-by-Side, marine, boat and deep-cycle batteries. Selectable charging modes include 12V, 12V AGM, 12V Lithium and 12V Repair Mode.

A collaboration with NOCO.&nbsp;Ideal for use within Side-by-Side and marine units.

<ul>
	<li>
	Not just a trickle charger, an advanced battery maintainer and fully automatic, worry-free battery charger for everyday use
	</li>
	<li>
	Fully sealed and waterproof with Ingress Protection Rating of IP68
	</li>
	<li>
	Backed by extensive life-cycle testing including thousands of hours underwater
	</li>
	<li>
	Charges batteries as low as 1-volt or use all-new force mode allowing manual charging of dead batteries down to zero volts
	</li>
</ul>

The X-Connect XL Eyelet Terminal by NOCO allows the quick, easy connection of a battery charger to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower or other battery for easy charging.

A collaboration with NOCO.&nbsp;

<ul>
	<li>Permanently mount a battery connection to any battery</li>
	<li>
	Lie-flat design for seamless installations with M10 (3/8&quot;) hole size
	</li>
	<li>
	Built-in fuse protection&nbsp;
	</li>
	<li>
	Rugged, watertight connector for extreme environments
	</li>
</ul>

The X-Connect Eyelet Terminal by NOCO allows the quick, easy connection of a battery charger to any battery. Replace a lost connector or permanently mount one on your motorcycle, ATV, snowmobile, personal watercraft, lawn mower or other battery for easy charging.

A collaboration with NOCO.&nbsp;

<ul>
	<li>
	Permanently mount a battery connection to any battery
	</li>
	<li>
	Lie-flat design for seamless installations with M8 (1/4&quot;) hole size
	</li>
	<li>
	Built-in fuse protection&nbsp;
	</li>
	<li>
	Rugged, watertight connector for extreme environments
	</li>
</ul>

The NOCO GB40 is a portable lithium-ion battery jump starter pack that delivers 1,000 amps for jump starting a dead battery in seconds. It's a powerful battery booster/jump starter designed for cars, boats, RVs, trucks and more. Also doubles as a convenient portable power source for recharging your smartphone, tablet or other USB device.

A collaboration with NOCO.&nbsp;

<ul>
	<li>1000 amp&nbsp;</li>
	<li>
	Spark-proof patented technology&nbsp;
	</li>
	<li>
	Built in 100 lumen light (6 modes)
	</li>
	<li>
	12V power-out supply
	</li>
	<li>
	Chargers with 2.1A micro-USB
	</li>
</ul>

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ATV