rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

The GYTR Race Grab Bar Number Plate Kit includes a replacement AMA regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>3,500 lb.: 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

The Front Winch Mount Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for handlebar-mounted rocker switch</li>
	<li>Power cables</li>
</ul>

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

This rugged Brush Guard is designed to provide additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile of the Kodiak while adding a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by&nbsp;Warn&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

The Quad Zone ATV Heated Grips by Heat Demon includes heated grips, thumb warmer, controller, DC plug and hardware.

A collaboration with Heat Demon.&nbsp;

Controller offers five levels of heat and four independent heat zones that share one set of display LEDs and setup buttons in a small, compact package. Two auxiliary ports can be used for Heat Demon&reg; Vest or Seat Heater (sold separately) using a 2.5mm DC plug (70 watts each). Totals 40 watts and draws less than 3 amps.

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

With its all-metal construction, the  WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 4,500 pound capacities</li>
	<li>4,500 lb.: &frac14;&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The Rear Bash Plates provides lightweight, durable protection for the rear of the unit.

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

The front Winch Mount Kit includes everything needed to mount on the stock front grab bar of a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Dedicated contactor mounting location for ease of installation</li>
</ul>

&nbsp;

Note: Requires&nbsp;Wiring Kit #DBY-10198-00-00, sold separately

&nbsp;

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

Durable yet light weight aluminum Frame Skid Plate provides protection against rocks and other objects. Strategically placed holes allow for easy maintenance and efficient mud drainage.

Provides generous protection from cold, wind, debris to rider’s hands, chest, head for enhanced comfort.

<ul>
	<li>
	&nbsp;Constructed of tough, durable&nbsp;and shatter-resistant polycarbonate
	</li>
	<li>
	&nbsp;Easy on easy off (after initial install) for servicing or towing, etc.
	</li>
	<li>
	&nbsp;Tilt is adjustable
	</li>
</ul>

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

These overfenders feature a tough, aggressive look, and have a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable thermoplastic olefin (TPO) plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
	<li>Minor drilling and trimming may be required</li>
	<li>Includes mounting hardware</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES