rootCategory.atv.atv-accessories.atv-accessories-sport

GYTR

Yamaha Genuine

NOCO

Dynojet

Black

Blue

Silver

Natural

Red/Black

Black/White

White

ATV: Sport

ATV: Utility

series

Series

Performance

Protection

Electrical

Service Parts

Miscellaneous

Handlebars & Controls

Tools

Covers

Bumpers, Grab Bars & Hitches

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

price

Price

brand

Brand

520 GMX2

520 GDO2

mm: 36

520 GMXL

428 GMX

520 GDXL2

mm: 14

520 GTS2

size

Size

color

Color

This lightweight, 0.25"-thick polyurethane construction is much lighter than standard aluminum skid plates and helps protect frame, engine, and chassis components. The plate provides a smooth, slick surface so the ATV can “glide” over track obstacles.

NOTE: Cannot be installed in conjunction with Aluminum Engine/ Frame Skid Plate.

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles. Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

These Yamaha Shock Covers help protect against rocks and debris. Heat-venting holes included for maximum performance. Easy to install and remove.

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc. The 520 GTS2 offers the same exceptional "X-Ring" features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.Note FZ1, YZF-R6, and YZF-R6S: GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.<ul><li>Displacement limit: up to 1200cc</li><li>Rivet-type master link included</li><li>Replacement rivet-type master link also available, sold separately</li><li>Tensile strength = 9,400lbs</li><li>120 links</li><li>Gold colored chain and links</li></ul>

The GYTR 520 GDXL2 Quadra-Ring Lite Chain &nbsp;is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains. The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc. Chains will not work on vehicles with a shaft drive.Note YZF-R6 and YZF-R6S: GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.<ul><li>Displacement limit: up to 750cc</li><li>Rivet-type master link included</li><li>Replacement clip-type and rivet-type master links also available, each sold separately</li><li>Tensile strength = 8,500lbs</li><li>120 links</li></ul>

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

Increased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall performance. The GYTR&reg; UNI Air Filter can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

The NOCO GENIUS2X4 is a 6-volt and 12-volt 4-bank battery charger, battery maintainer, trickle charger and battery desulfator. It's rated at 8 amps (2 amps per bank) for all types of lead-acid and lithium-ion batteries including flooded, gel, AGM, marine and deep-cycle batteries.

<ul>
	<li>
	2 amp charging capacity per bank is great for multi-battery charging jobs that require quick battery charging
	</li>
	<li>
	2X faster than GENIUS1
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.<ul><li>Displacement limit: up to 500cc</li><li>Clip-type and rivet-type master links included</li><li>Replacement clip-type and rivet-type master links also available, each sold separately</li><li>Tensile strength = 8,400lbs</li><li>120 links</li></ul>

<ul>
<li>Direct Yamaha Genuine stock replacement</li>
<li>One year warranty against manufacturing defects</li>
</ul>

This kit allows for the removal of the air induction system (AIS) from your ATV to provide weight reduction.This accessory is restricted to closed-course competition use. See <a href="../../help/terms#CARB">California Regulations regarding Emission-Related Parts and Accessories</a> for products for closed-course competition use only.

The NOCO Genius GEN5X1 is a single-bank waterproof onboard battery charger rated at 5 amps for 12-volt batteries including Side-by-Side, marine, boat and deep-cycle batteries. Selectable charging modes include 12V, 12V AGM, 12V Lithium and 12V Repair Mode.

<ul>
	<li>
	Not just a trickle charger, an advanced battery maintainer and fully automatic, worry-free battery charger for everyday use
	</li>
	<li>
	Fully sealed and waterproof with Ingress Protection Rating of IP68
	</li>
	<li>
	Backed by extensive life-cycle testing including thousands of hours underwater
	</li>
	<li>
	Charges batteries as low as 1-volt or use all-new force mode allowing manual charging of dead batteries down to zero volts
	</li>
</ul>

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

&nbsp;

<ul>
	<li>Meets all AMA&reg; and ATVA&reg;racing regulations.</li>
	<li>Requires webbing, sold separately.</li>
</ul>

&nbsp;For closed-course competition only.

The Power Commander® V is loaded with tons of new features. Now less than half the size of the Power Commander® III USB and USB-powered from a computer, no longer requiring a 9-volt adaptor for programming.

<ul>
	<li>
	A 2-position map switching function comes built in (map switch not included)
	</li>
	<li>
	Gear input allows for map adjustment based on gear and speed
	</li>
	<li>
	Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input, such as temperature
	</li>
	<li>
	With gear position input connected, the PC V is capable of allowing each cylinder to be mapped individually and for each gear (e.g., on a 4-cylinder motorcycle with a 6-speed transmission there could be up to 24 separate fuel tables)
	</li>
	<li>
	Unit has a -100/ +250% fuel change range (up from -100/ +100%) and 10 throttle position columns (up from 9 on PC III USB)
	</li>
	<li>
	Also features an enhanced &ldquo;accel pump&rdquo; utility via increased adjustment and sensitivity ranges
	</li>
</ul>

This accessory is restricted to closed-course competition use. See <a href="https://ww2.arb.ca.gov/our-work/programs/aftermarket-performance-and-add-parts">California Regulations regarding Emission-Related Parts and Accessories</a> for products for closed-course competition use only.

The NOCO GENIUS5 is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 5 amps for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deep-cycle batteries.

<ul>
	<li>
	5 amp charging capacity great for jobs that require fast battery charging
	</li>
	<li>
	5x faster than GENIUS1
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The GYTR&reg; Top End Gasket Kit is required for installation of the GYTR High Compression Piston Kit.WARNING: Cancer and Reproductive Harm - <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

The GYTR Sport Front Grab Bar features special ball-burnished aluminum tube construction with lower bash plate. &nbsp;The grab bar is designed to be both functional and sporty.

GYTR&reg; Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances. Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

See <a href="../../help/terms#CARB">California Regulations regarding Emission-Related Parts and Accessories</a> for products for closed-course competition use only.

Combines the nerf bars, footwells, and foot pegs into one accessory.

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

These complete Yamaha Clutch Kits include the plates, springs, and gaskets, ready to install. Refer to service manual for installation instructions.

&nbsp;

WARNING: Cancer and Reproductive Harm - <a href="http://www.P65Warnings.ca.gov">www.P65Warnings.ca.gov</a>.

The NOCO GENIUS1 is a 6-volt and 12-volt battery charger, battery maintainer and battery desulfator rated at 1 amp for a variety of lead-acid and lithium-ion batteries including AGM automotive, marine and deep-cycle batteries.

<ul>
	<li>
	1 amp charging capacity is great for overnight charges and battery maintenance
	</li>
	<li>
	Charge dead batteries down to zero volts
	</li>
	<li>
	Easy as plug-in, connect to battery, select a charge mode and start charging&nbsp;
	</li>
</ul>

The GYTR Race Grab Bar Number Plate Kit includes a replacement AMA regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

SPORT ATV