rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Magellan

Assault Industries

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Storage

Audio and Tech

Lighting

Sun Tops

Performance

Overfenders & Flares

Electrical

Mirrors

Safety Gear

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Pounds: 2500

Pounds: 3500

Inch: 1.5

mm: 36

mm: 14

size

Size

color

Color

Combining a powerful motor and smart digital contactor into one, the Motactor™ on the AXON Winch with 50 feet of Synthetic Rope is perfect for extreme environments. 

A collaboration with WARN&reg;.

<ul>
	<li>3,500 lb.: 3/16&rdquo; of Spydura synthetic rope</li>
	<li>Motactor&trade; simplifies winch installation by 50%</li>
	<li>Monitor speed, load and motor temperature from winch remote</li>
	<li>Load limiter prevents overloading winch damage</li>
	<li>Rigid all-metal, waterproof construction</li>
	<li>New clutch design based on legendary WARN 4WD hub lock design</li>
</ul>

The GYTR High Compression Piston Set was designed by our very own engineering team. Countless hours of dyno work have led to the creation of this exclusive piston set for your YXZ. Utilizing proprietary data only known by our engineers, the GYTR High Compression Piston Set is for the serious racer looking for the ultimate performance! This kit includes piston rings, wrist pins, and clips.

<ul>
	<li>
	Shallow valve pockets for increased compression (13.5:1 piston only; 15:1 when installed with the GYTR Race Cylinder Head Assembly)
	</li>
	<li>
	Highly recommended to be used in conjunction with GYTR Full Exhaust System by Dasa Racing and GYTR Race Cylinder Head Assembly
	</li>
	<li>
	Under crown matching to keep consistent piston weights identical to stock weight to maintain perfect engine balance
	</li>
	<li>
	Requires the use of the Power Commander&reg; V by DynoJet Research&reg; and GYTR Race Connecting Rod Set, both sold separately
	</li>
	<li>
	Designed to be used with additional GYTR accessories for the ultimate engine performance
	</li>
	<li>
	Requires use of minimum 112-octane racing fuel
	</li>
</ul>

The Yamaha 60W LED Light Bar is the superior lighting solution that utilizes quality components such as Carling®-style switches and marine-grade connectors and includes everything needed to install on your side-by-side.

&nbsp;

<ul>
	<li>
	12 - 5W Cree&reg; LEDs
	</li>
	<li>
	Newly designed wide spot reflector for improved light dispersion over standard light bars
	</li>
	<li>
	50,000 hour life span
	</li>
	<li>
	Aluminum extruded housing
	</li>
	<li>
	Flexible mounting base with lateral mounting capability
	</li>
	<li>
	Vehicle wiring harness with roof grommet
	</li>
	<li>
	Illuminated 2-position switch
	</li>
	<li>
	Low power consumption
	</li>
	<li>
	Beam configuration: 4 wide spot, 4 spot, 4 wide spot (15&rdquo;)
	</li>
	<li>
	Includes mounts
	</li>
</ul>

This alternator is a great addition to the YXZ1000R™, ensuring your battery stays charged while running different electrical accessories such as lights and stereos.

&nbsp;

<ul>
	<li>35 Amps Output</li>
	<li>Alternator and mount</li>
	<li>Wiring</li>
	<li>Belt and pulley</li>
	<li>Dust Cover</li>
	<li>New oil lines (must relocate)</li>
	<li>All necessary hardware</li>
	<li>This Alternator Kit is required for use if either the 27&rdquo; or 15&rdquo; High Output HALO LED Light Bar or 27&rdquo; Radiant LED Light Bar (sold separately) is installed on the unit</li>
</ul>

NOTE: Dealer installation recommended.

Riding at night and in low-light conditions becomes safer and more comfortable with the amount of additional light this bar kicks out.

<ul>
	<li>5W Cree&reg; LEDs</li>
	<li>50,000 hour life span</li>
	<li>Aluminum extruded housing</li>
	<li>Custom Yamaha end caps</li>
	<li>Flexible mounting base with lateral mounting capability</li>
	<li>Vehicle wiring harness with roof grommet</li>
	<li>Illuminated 2-position switch</li>
	<li>Low power consumption</li>
	<li>Beam configuration: 4 Flood, 8 Spot, 4 Flood (27&rdquo;)</li>
	<li>Dimensions: 27&rdquo; Light Bar - 27.56&rdquo;W x 2.48&rdquo;H x 3.89&rdquo;D</li>
	<li>Includes mounts</li>
	<li>Because Yamaha has the highest standard for our customers, we &ldquo;Highly Recommend&rdquo; using the 2nd battery kit or Alternator kit when installing multiple electronics on the YXZ1000R or YXZ1000R SS</li>
	<li>Optional Switch Panel Kit also available separately</li>
</ul>

NOTE: Drilling of Sun Top required for installation.

Nothing makes audio sound better than a Powered Subwoofer. This 8” Subwoofer is custom built to fit under the seat and is completely sealed and waterproof. With 200 watts of power, your friends will feel and hear you coming down the trail.

&nbsp;

<ul>
	<li>
	200 watt amp
	</li>
	<li>
	Custom designed 8&rdquo; sub with SMC sub enclosure
	</li>
	<li>
	Mounting location under driver&rsquo;s seat to maintain cargo space
	</li>
	<li>
	Prewiring included for all models equipped with factory audio system
	</li>
	<li>
	Compatible with Heater Kit and Second Battery Kit
	</li>
</ul>

Yamaha’s new 3D-formed Wolverine Full Polycarbonate Windshield provides smoother airflow while perfectly complementing the quality look and feel of your Wolverine Side-by-Side.

<ul>
	<li>3D-formed shape provides smoother air flow &amp; improved styling</li>
	<li>Silk-screened border provides premium look</li>
	<li>Superior clarity &amp; rigidity from 3/16&rdquo; optical-grade polycarbonate</li>
	<li>Hard coated on both sides for 300% more scratch resistance vs standard polycarbonate&nbsp;</li>
	<li>Exclusive toolless quick-release clamps</li>
	<li>Yamaha-engineered integration for a seamless fit&nbsp;</li>
</ul>

Note: Works with the Yamaha Genuine Soft Enclosure Covers

<ul>
	<li>B4M-F17B0-V1 for Wolverine X2 &amp; Wolverine RMAX2 1000</li>
	<li>B4J-F17B0-V1 for Wolverine RMAX4 1000</li>
	<li>BAR-F17B0-V1 for Wolverine X4&nbsp;</li>
</ul>

Note: Not compatible with Hard Cab System Doors

Increase the performance of your Yamaha Genuine Audio Kit with these Overhead Speakers. Mounted in a custom-tuned speaker pod that is designed to maximize the audio quality and to fit the Wolverine perfectly, these pods are a direct plug into the Yamaha Genuine audio system.

A collaboration with SSV Works.

<ul>
	<li>Two loaded 6.5&rdquo; Marine pod speakers</li>
	<li>Rugged, custom designed pods</li>
	<li>Plug-and-play wiring kit</li>
	<li>Great addition to the RMAX4 1000 factory audio kit</li>
	<li>Specifically designed with the Yamaha Genuine Suntop for perfect fit and finish</li>
</ul>

The Viking Folding Windshield provides protection and versatility when conditions change thanks to its handy folding design.

Fold the hard-coated polycarbonate panels up or down to suit your needs.

<ul>
	<li>The windshield remains secure when folded down.</li>
	<li>Easy tool-free removal simplifies cleaning and maintenance.</li>
	<li>Other features include injection molded rubber hood blocks, injection molded plastic tool-less clamps, windshield-to-hood brackets, and is scratch resistant.</li>
	<li>Will not shatter like acrylic windshields.</li>
</ul>

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>4,500 lb.: &frac14;&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

A complete heater and defroster system for a Yamaha Viking - everything you need for a professional installation is included.

A collaboration with Heater Craft.&nbsp;American made and engineered.

<ul>
	<li>
	22,000 BTU/hr and a 240 CFM blower to provide maximum heating comfort&nbsp;
	</li>
	<li>
	A total of three vents - one for defrosting and two dash/cab vents
	</li>
	<li>
	Wire harness
	</li>
	<li>
	Two-position rocker switch
	</li>
	<li>
	Vent/heater hose and clamps
	</li>
	<li>
	All &nbsp;mounting brackets, hardware, cable ties&nbsp;and instructions included
	</li>
</ul>

The Wolverine X4 Premium Headliner is the perfect finishing piece to the underside of the Yamaha accessory—Hard Cab Enclosure System and Hard Sun Top Kit, both sold separately.

Why sacrifice luxury just because you&rsquo;re off-roading?

Six integrated LED lights provide ample light over the full interior and cargo area of the Wolverine X4. Includes integrated mounting locations for six speakers that work perfectly with our Yamaha/SSV Works&reg; Audio Systems. The stylish designs of these systems look great with or without speakers installed, allowing you to choose the system best suited for your needs without sacrificing style.

<ul>
	<li>Six LED 3W integrated overhead lights with marine-grade switch</li>
	<li>Fully encases Rollover Protection Structure (ROPS) for a finished automotive style, look, and feel</li>
	<li>No drilling required</li>
</ul>

Compatible with Yamaha&rsquo;s accessory Hard Cab Enclosure System and Soft Cab Enclosure System, both sold separately

Requires Hard Sun Top Kit, sold separately

This full length, one-piece, single sheet polyethylene Hard Sun Top Kit provides optimal shade while also adding protection from low hanging trees and brush along the trails.

&nbsp;

<ul>
	<li>One part for simple installation and no leaky seams</li>
	<li>Includes all necessary hardware needed for installation</li>
	<li>Designed to work perfectly with the accessory Soft Side Covers and Rear Window, both sold separately</li>
</ul>

A perfect, versatile Soft Cab Enclosure System that complements the Wolverine X2. This system includes our accessory Soft Rear Window which is made from durable Sur Last® 300D. Clear vinyl doors give you the complete coverage needed to keep the elements out while keeping you on the trail longer. Since weather isn’t always predictable, our collapsible door windows provide the ability to adjust the system, allowing the rider to control the amount of coverage the day demands. Protects occupants from rain, wind, mud, and light trail debris.

<ul>
	<li>Quick snap-on/pull-off installation</li>
	<li>Zippers operate in conjunction with doors for easy in/out access</li>
	<li>Windows can be rolled up and secured with straps when not needed</li>
	<li>Made of durable Sur Last&reg; 300D and clear vinyl</li>
	<li>Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly</li>
	<li>When installed in conjunction with our accessory Polycarbonate Front Windshield and Hard Sun Top Kit (both sold separately) it closes the gap and provides a good seal from cold and rain</li>
	<li>All components are rust and UV-resistant</li>
</ul>

Note:

<ul>
	<li>Highly recommended to be used in conjunction with our accessory Polycarbonate Front Windshield, sold separately</li>
	<li>Requires Hard Sun Top Kit, sold separately</li>
</ul>

Dealer installation recommended (drilling and riveting required)

This full length, one-piece, twin sheet polyethylene Hard Sun Top Kit provides optimal shade while also adding protection from low hanging trees and brush along the trails.

Designed to work perfectly with Yamaha&rsquo;s accessory Hard Cab Enclosure System and Soft Cab Enclosure System, both sold separately.

<ul>
	<li>
	A true one part system for simple installation&mdash;no leaky seams
	</li>
	<li>
	Integrated wiring paths
	</li>
	<li>
	Includes all necessary hardware
	</li>
</ul>

The cargo bed box with 4 cubic feet of cargo capacity, our tough and durable polyethylene cargo bed box securely carries what you need when venturing out in your Viking. It is water and dust resistant and has lockable latches to secure valuables.

<ul>
	<li>
	Gas shocks on both lids keep lids raised for easy access
	</li>
	<li>
	Attachment points on both lids
	</li>
	<li>
	Great for hunters &ndash; no reflective surfaces
	</li>
</ul>

Requires the Bed Rail Accessory Mounts for installation, sold separately (factory installed on certain Viking models)&nbsp;

The Rear Cargo Box fits perfectly in the rear cargo area for additional/maximum storage space without sacrificing the versatility of your Wolverine side-by-side.

This lockable box works great with or without Yamaha&rsquo;s optional cab systems.

<ul>
	<li>Integrated cup holders</li>
	<li>Lockable and water-resistant</li>
	<li>Maintains full functionality of tailgate</li>
	<li>Two integrated mounting points for easy installation</li>
	<li>No tools needed for installation and/or removal</li>
	<li>Capacity: 24 gallons (approximately 3.2 cu. ft.)</li>
</ul>

With its all-metal construction, the  WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 4,500 pound capacities</li>
	<li>4,500 lb.: &frac14;&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

Yamaha Genuine Soft Side Enclosure perfectly fits your Wolverine while providing protection from the elements. Works with the soft rear window, Sun Top and poly windshields for a complete enclosure.

&nbsp;

<ul>
	<li>Protects occupants against rain, wind, mud and light trail debris</li>
	<li>Zippers operate with doors for easy ingress and egress</li>
	<li>Windows can be rolled up and secured with straps when not in use</li>
	<li>Quick snap-on/pull-off installation</li>
	<li>Attaches with hook-and-loop and permanent riveted snap, removing the adhesive that gums up the panels and doors</li>
	<li>Made from durable Sur Last&reg; 300 denier nylon and clear vinyl</li>
	<li>Rust and UV resistant</li>
</ul>

Compatible with (sold separately):

<ul>
	<li>Soft Rear Window Part #B4M-K750A-T0-00</li>
	<li>Full Polycarbonate Windshield Part #B4J-F83J0-V0-00&nbsp;or Folding Polycarbonate Windshield Part #B4M-F83J0-V0-00.&nbsp;For ultimate element protection, Poly Windshield is recommended</li>
</ul>

Requires Hard Suntop: Part #B4M-K84A0-V0-00 (sold separately or comes standard on some models) 
 
Dealer installation recommended (drilling and riveting required)

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>3,500 lb.: 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

Protect the front of your Wolverine X2/X4 with our Front Brush Guard. Provides excellent protection from brush and trail obstacles while blending perfectly with the styling of the Wolverine’s front end.

&nbsp;

<ul>
	<li>Integrated Winch Mount &ndash; Does NOT require additional mount like the OEM grab bar</li>
	<li>Compatible with all VRX and Axon Winches</li>
	<li>Includes 2 anchor points for secure and convenient trailering</li>
	<li>Mounting locations for Yamaha accessory LED spot lights or flood Lights, sold separately</li>
	<li>Exceptional durability, all steel construction, 1.5 in. tubing that&rsquo;s been e-coated and powder coated</li>
	<li>Easy bolt-on installation utilizing stock mounting location</li>
</ul>

Everything you need to install the GYTR 4-Point Harness on the driver and passenger seats with one, convenient kit.

No modification required- installs with hand tools for ease of installation.&nbsp;Complies with ANSI/ROHVA standards. Kit includes:

<ul>
	<li>
	Harness Mount #B5H-F47K0-V0-00&nbsp;and GYTR 4-Point Harness #B57-F47K0-V0-00
	</li>
	<li>
	Harness Mount is constructed of forged aluminum for strength and durability
	</li>
</ul>

This Rear Grab Bar is designed to help protect your YXZ™’s rear area and fits the unit’s styling perfectly.

<ul>
	<li>
	Utilizes three mounting points for a secure mount
	</li>
	<li>
	Extends down the frame tube for additional coverage
	</li>
	<li>
	Made of 0.08&rdquo; thick steel tubing and sheet metal
	</li>
</ul>

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The Viking Soft Side Cover will protects occupants from rain, wind, mud, and light trail debris.

<ul>
	<li>Quick snap-on/pull-off installation</li>
	<li>Zippers operate in conjunction with doors for easy in/out access</li>
	<li>Windows can be rolled up and secured with straps when not needed</li>
	<li>Made of durable Sur Last&reg; 300 denier nylon and clear vinyl</li>
	<li>Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly</li>
	<li>All components are rust and UV resistant</li>
</ul>

Note:

<ul>
	<li>Highly recommended to be used in conjunction with accessory Rear Window, Folding Windshield, and either Hard Sun Top or Soft Sun Top for maximum cab warmth and weather protection (all sold separately)</li>
	<li>When installed in conjunction with the accessory Folding Windshield and Top (sold separately), it closes the gap and provides a good seal from cold and rain</li>
</ul>

Dealer installation recommended (drilling and riveting required).&nbsp;

Featuring injection-molded polypropylene construction, the Viking 3-Seater Molded Sun Top is built to withstand the conditions and provide shade and shelter from rain and backwoods debris like brush and leaves. Compatible with Cab Light.

This full length, one-piece, polyethylene Hard Sun Top Kit provides optimal shade while also adding protection from low hanging trees and brush along the trails. Designed to work perfectly with Yamaha’s accessory Hard Cab Enclosure System or Soft Cab Enclosure System, both sold separately.

&nbsp;

<ul>
	<li>
	A true one part system for simple installation&mdash;no leaky seams
	</li>
	<li>
	Integrated wiring paths
	</li>
	<li>
	Includes all necessary hardware
	</li>
</ul>

Integrated rain channel sheds debris and water away from occupants. Polyethylene.

&nbsp;

<ul>
	<li>
	Designed and tested to minimize damage from the trail
	</li>
	<li>
	Simple installation
	</li>
	<li>
	Lightweight design with additional reinforcement in critical areas
	</li>
	<li>
	Supports Yamaha Genuine accessories
	</li>
	<li>
	Compatible with all hard and soft cab enclosures
	</li>
	<li>
	Includes all necessary hardware needed for installation
	</li>
</ul>

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

The Wolverine Bed Extender fits all 2018 and older models. Solid steel construction provides 8 additional tie down points as well as additional storage area.

<ul>
	<li>
	117% increase in storage area behind the rear seats of Wolverine X4 and RMAX4 models when carrying passengers in the rear seats
	</li>
	<li>
	33% increase in storage area on Wolverine X2 and RMAX2 models
	</li>
	<li>
	Tool less removal and install with provided thumbscrews (after initial install is complete)
	</li>
</ul>

&nbsp;

Note: Not compatible with cargo box on RMAX4/X4

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES