rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Magellan

Assault Industries

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Audio and Tech

Storage

Lighting

Sun Tops

Performance

Overfenders & Flares

Electrical

Mirrors

Safety Gear

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Pounds: 2500

Pounds: 3500

Inch: 1.5

mm: 36

mm: 14

size

Size

color

Color

These 2.5” Accessory Pod Lights are a great addition to point light where your headlights can’t reach. These 10W LEDs shine an extremely bright beam while drawing very little power. Their compact size makes them versatile and allows you to mount them just about anywhere on your SxS.

&nbsp;

<ul>
	<li>Can be mounted on any flat area</li>
	<li>Can be mounted on Wolverine X2/X4 accessory front and rear brush guards, sold separately</li>
	<li>360&deg; adjustability</li>
	<li>Wolverine RMAX 1000 LE and XT-R require Front Pod Light Mount Kit #B4J-H4010-V0-00, sold separately</li>
	<li>Sold in pairs and includes a harness and switch</li>
</ul>

Shown on YXZ1000R and UMAX light utility vehicle.

This complete set of four FOX Podium 2.0 shocks are designed as a direct replacement for the Yamaha Viking/Viking VI stock shocks. They provide adjustable ride height to help maintain clearance when carrying varying loads and are fully rebuild-able for use in conjunction with accessories or on terrain that may require a different setup.

A collaboration with FOX.

<ul>
	<li>
	2.0 Type-III anodized aluminum body and reservoir
	</li>
	<li>
	Ultra-durable bottom out bumper
	</li>
	<li>
	5/8&quot; hard chromed shaft
	</li>
	<li>
	High-flow, velocity-sensitive damping
	</li>
	<li>
	Fully rebuild-able and re-valveable
	</li>
	<li>
	Easy mounting utilizing OE hardware (refer to your Viking Service Manual for installation instructions)
	</li>
	<li>
	Enhanced Low/High speed comfort to suit a variety of driving conditions, preferences and terrains
	</li>
</ul>

This front-mounted pod light kit comes stock on certain YXZ1000R models.

&nbsp;

<ul>
	<li>Two 5 W Cree&reg; LEDs</li>
	<li>Includes Marine-grade wiring and hardware needed for installation</li>
	<li>Can be mounted under the hood scoop of 2019 and newer YXZ1000R models</li>
	<li>Lights will illuminate when high beams are operated</li>
</ul>

The Yamaha 60W LED Light Bar is the superior lighting solution that utilizes quality components such as Carling®-style switches and marine-grade connectors and includes everything needed to install on your side-by-side.

&nbsp;

<ul>
	<li>
	12 - 5W Cree&reg; LEDs
	</li>
	<li>
	Newly designed wide spot reflector for improved light dispersion over standard light bars
	</li>
	<li>
	50,000 hour life span
	</li>
	<li>
	Aluminum extruded housing
	</li>
	<li>
	Flexible mounting base with lateral mounting capability
	</li>
	<li>
	Vehicle wiring harness with roof grommet
	</li>
	<li>
	Illuminated 2-position switch
	</li>
	<li>
	Low power consumption
	</li>
	<li>
	Beam configuration: 4 wide spot, 4 spot, 4 wide spot (15&rdquo;)
	</li>
	<li>
	Includes mounts
	</li>
</ul>

This 8" section of durable synthetic rope temporarily replaces your wire winch rope for the plow season saving wear and tear on the winch wire rope. It stands up to repeated sharp angle pulls used to lift heavy plows and works on all aluminum drum WARN® ATV and Side-by-Side winches.

Riding at night and in low-light conditions becomes safer and more comfortable with the amount of additional light this bar kicks out.

<ul>
	<li>5W Cree&reg; LEDs</li>
	<li>50,000 hour life span</li>
	<li>Aluminum extruded housing</li>
	<li>Custom Yamaha end caps</li>
	<li>Flexible mounting base with lateral mounting capability</li>
	<li>Vehicle wiring harness with roof grommet</li>
	<li>Illuminated 2-position switch</li>
	<li>Low power consumption</li>
	<li>Beam configuration: 4 Flood, 8 Spot, 4 Flood (27&rdquo;)</li>
	<li>Dimensions: 27&rdquo; Light Bar - 27.56&rdquo;W x 2.48&rdquo;H x 3.89&rdquo;D</li>
	<li>Includes mounts</li>
	<li>Because Yamaha has the highest standard for our customers, we &ldquo;Highly Recommend&rdquo; using the 2nd battery kit or Alternator kit when installing multiple electronics on the YXZ1000R or YXZ1000R SS</li>
	<li>Optional Switch Panel Kit also available separately</li>
</ul>

NOTE: Drilling of Sun Top required for installation.

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

Combining a powerful motor and smart digital contactor into one, the Motactor™ on the AXON Winch with 50 feet of Synthetic Rope is perfect for extreme environments. 

A collaboration with WARN&reg;.

<ul>
	<li>3,500 lb.: 3/16&rdquo; of Spydura synthetic rope</li>
	<li>Motactor&trade; simplifies winch installation by 50%</li>
	<li>Monitor speed, load and motor temperature from winch remote</li>
	<li>Load limiter prevents overloading winch damage</li>
	<li>Rigid all-metal, waterproof construction</li>
	<li>New clutch design based on legendary WARN 4WD hub lock design</li>
</ul>

Combining a powerful motor and smart digital contactor into one, the Motactor™ on the AXON Winch with 50 feet of Synthetic Rope is perfect for extreme environments. Synthetic rope available in 3,500 and 4,500 pound capacities

A collaboration with WARN&reg;.

<ul>
	<li>4,500 lb.: 1/4&quot; of Spydura synthetic rope</li>
	<li>Motactor&trade; simplifies winch installation by 50%</li>
	<li>Monitor speed, load and motor temperature from winch remote</li>
	<li>Load limiter prevents overloading winch damage</li>
	<li>Rigid all-metal, waterproof construction</li>
	<li>New clutch design based on legendary WARN 4WD hub lock design</li>
</ul>

The front Winch Mount Kit includes everything needed to install an AXON Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
</ul>

The AXON Winch Wiring Kit includes everything needed to wire an AXON Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Digital handlebar-mounted rocker switch</li>
	<li>Unit-specific wiring</li>
</ul>

Note: Requires Accessory Front Grab Bar&nbsp;#B5R-F84L0-V0-00, sold separately

The AXON Wiring Kit includes everything needed to install an AXON Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash mounted Carling rocker switch</li>
	<li>All necessary hardware and instructions</li>
</ul>

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Maximum AXON winch capactiy: 3,500 lb.&nbsp;</li>
</ul>

Fits 18~19&nbsp;Wolverine X2/X4

A collaboration with WARN&reg;. Kit Includes:

<ul>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Wired remote</li>
	<li>Fairlead Adaptor for 3,500 lb. winches</li>
</ul>

Note: Requires Heavy Duty Front Brush Guard #BAS-F84L0-V0-00 or Front Grab Bar with Winch Mount #BAS-F84L0-T0-00, Sold Separately.

Use this bracket to mount the center mirror to your Yamaha side-by-side using the integrated flow drill holes already in the ROPS. Provides the optimal angle and view point for the center mirror.

&nbsp;

<ul>
	<li>
	All steel construction for durability and minimal vibration
	</li>
	<li>
	Exceptional rust and weather durability by being both e-coated and powder coated
	</li>
	<li>
	No drilling required
	</li>
	<li>
	All hardware included
	</li>
</ul>

The center mount mirror features a large 3.8" x 10" convex mirror and plastic injection-molded bracket and mirror housing. Fully adjustable and works with Yamaha Genuine windshields and sun tops.

Jam out to some tunes by easily pairing your phone with Bluetooth 5.0 for a long range wireless connection. Mountable virtually anywhere with universal attachment points and integrated threaded mounting holes.

Includes remote to control volume, play/pause, change track or easily adjust the LED Party Lights and LED Light Bar.&nbsp;

Features AM/FM and Bluetooth with built-in microphone for speakerphone calls. Aux-In port to play audio from a wired device, Aux-Out port to daisy chain to other wired speakers, and a 5V USB charge port to make sure your phone keeps the party going. Easily connect additional 12V accessories or soundbars with the 12V 10A auxiliary output connector. Huge sound in small package at only 25.5&rdquo; long x 4.5&rdquo; tall (6.5&rdquo; tall with mounts).

Includes 6&#39; fused power lead, auxiliary power out mating connector, 2x mounting brackets, adjustable clamps, RF remote and universal mounting hardware.

<ul>
	<li>EcoCast. Allows up to 100 soundbars to be connected together or connected to any ECOXGEAR speaker with the EcoCast feature</li>
	<li>RGB Party Lights. Choose from Red?Green/White/Blue Solid, Sync to Music</li>
	<li>Integrated LED Light Bar. 3 color options &nbsp;(red, white, dimmed white)</li>
	<li>500W Total Peak Power. 8 total speakers - Dual Woofers, 4 mid-range and 2 tweeters. Two independently sealed cavities for true left and right stereo sound</li>
	<li>IP66 rated with Marine-Grade Speakers. 100% water, dirt and dust proof enclosure</li>
</ul>

&nbsp;

Fitment. Universal for most 12V vehicles including golf cars, boats, side-by-side vehicles, and ATV&rsquo;s.

Requires. Custom mounting solution and wiring to 12V source.

Recommended. 48-12V Regulator Kit for 2017~ Drive2 AC Electric, #J0J-H1910-V0-00, sold separately

Yamaha is proud to announce our collaboration with Dasa Racing to offer the all-new GYTR Full Exhaust System for YXZ1000R models.

This top-of-the-line exhaust system utilizes three equal length stainless steel pipes beautifully TIG-welded in a true 3-pipe merge. The aluminum muffler housing is powder-coated in an exclusive smoke chrome finish with a machined endcap and GYTR emblem to provide additional style. Not only is this exhaust system unmatched in style and quality, it also gives you the performance gains and weight savings you demand in a closed course, race-only exhaust system.

<ul>
	<li>No unsightly MIG welds or stamped parts</li>
	<li>Stock Yamaha clamps and gaskets for the bead pipe and mid-pipe joint for added sealing and durability</li>
	<li>8 lb. lighter; 10% horsepower gain1 over the stock YXZ1000R system</li>
	<li>Includes spark arrestor</li>
	<li>Requires the use of Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
</ul>

The GYTR High Compression Piston Set was designed by our very own engineering team. Countless hours of dyno work have led to the creation of this exclusive piston set for your YXZ. Utilizing proprietary data only known by our engineers, the GYTR High Compression Piston Set is for the serious racer looking for the ultimate performance! This kit includes piston rings, wrist pins, and clips.

<ul>
	<li>
	Shallow valve pockets for increased compression (13.5:1 piston only; 15:1 when installed with the GYTR Race Cylinder Head Assembly)
	</li>
	<li>
	Highly recommended to be used in conjunction with GYTR Full Exhaust System by Dasa Racing and GYTR Race Cylinder Head Assembly
	</li>
	<li>
	Under crown matching to keep consistent piston weights identical to stock weight to maintain perfect engine balance
	</li>
	<li>
	Requires the use of the Power Commander&reg; V by DynoJet Research&reg; and GYTR Race Connecting Rod Set, both sold separately
	</li>
	<li>
	Designed to be used with additional GYTR accessories for the ultimate engine performance
	</li>
	<li>
	Requires use of minimum 112-octane racing fuel
	</li>
</ul>

GYTR Race Camshaft Set provides added lift and duration over the YXZ’s stock camshaft.

&nbsp;

<ul>
	<li>High lift, REM-finished for ultimate durability</li>
	<li>Designed to be used with the stock valve train</li>
	<li>Included in the GYTR Race Cylinder Head Assembly, sold separately</li>
	<li>Requires the use of the Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
	<li>Requires use of minimum 112-octane racing fuel (octane requirement is dependent on engine configuration)</li>
</ul>

Yamaha Factory racing horsepower now available for our YXZ racers. The GYTR Race Cylinder Head Assembly comes fully assembled with REM-finished GYTR race camshafts and CNC-ported head for increased flow, providing ultimate performance and reliability.

&nbsp;

<ul>
	<li>Head surface decked for improved compression ratio from 11.5-12.5</li>
	<li>Stock valves, buckets, and springs are included for durability and easy maintenance</li>
	<li>Requires the use of the Power Commander&reg; V by Dynojet Research&reg;, sold separately</li>
	<li>Designed to be used with additional GYTR accessories for the ultimate engine performance</li>
	<li>Requires use of minimum 112-octane racing fuel (if this head assembly is used without other engine modifications, 110-octane racing fuel can be used)</li>
</ul>

Requires stock cam gears (not included).

This accessory is restricted to closed-course competition use.&nbsp;

The GYTR Wolverine RMAX 4-Point Harness combines the shoulder and lap belts for a secure seat restraint for your RMAX. The OEM-style buckle, durable shoulder padding and adjustable straps ensure maximum comfort and added confidence for long days on the trail.

<ul>
	<li>Adjustable padded straps provide excellent comfort&nbsp;</li>
	<li>Pull tabs for convenient adjustment while wearing the recommended safety gear</li>
	<li>Front harness retains operation of drivers side seatbelt indicator</li>
	<li>OEM-style buckle for ease of use</li>
	<li>Sold in pairs&nbsp;</li>
</ul>

Note: Front and rear harnessess sold separately

 
Requires:

<ul>
	<li>GYTR Harness Mount #B4J-F47P0-V0-00. Sold separately. 
	&nbsp;</li>
</ul>

Complies with ANSI/ROHVA standards when installed with the GYTR Harness Mount&nbsp;

The GYTR Wolverine RMAX 4-Point Harness Mount eases the installation of the upper harness straps without modification to the OEM roof support and positions the angle of the straps to provide excellent comfort to the GYTR 4-Point Harness.

<ul>
	<li>Compatible with either 2&quot; or 3&quot; harnesses</li>
	<li>Constructed of strong, forged aluminum material with a powder coated finish for added durability</li>
	<li>Ease of installation utilizing common hand tools</li>
	<li>Includes seat back belt guide for proper strap placement and excellent comfort&nbsp;</li>
	<li>Sold in pairs</li>
	<li>RMAX4 requires two sets to accommodate both the front and rear harnesses</li>
</ul>

Note: Front and rear are sold separately.

The GYTR YXZ 4-Point Harness combines the shoulder and lap belts for a secure seat restraint for your YXZ. The OEM-style buckle, durable shoulder padding and adjustable straps ensure maximum comfort and added confidence for long days riding. 

<ul>
	<li>Adjustable padded straps provide excellent comfort&nbsp;</li>
	<li>Styled to match the accessory Interior Padding Kit #B57-F11G0-V0-00, sold separately</li>
	<li>Retains operation of drivers side seatbelt indicator&nbsp;</li>
	<li>OEM-style buckle for ease of use&nbsp;</li>
	<li>Sold in pairs&nbsp;</li>
	<li>Complies with ANSI/ROHVA standards when installed with the GYTR Harness Mount&nbsp;</li>
</ul>

&nbsp;

When fitting to Model Year 2019, the accessory YXZ Harness Mount #B5H-F47K0-V0-00, sold separately) is required.

Everything you need to install the GYTR 4-Point Harness on the driver and passenger seats with one, convenient kit.

No modification required- installs with hand tools for ease of installation.&nbsp;Complies with ANSI/ROHVA standards. Kit includes:

<ul>
	<li>
	Harness Mount #B5H-F47K0-V0-00&nbsp;and GYTR 4-Point Harness #B57-F47K0-V0-00
	</li>
	<li>
	Harness Mount is constructed of forged aluminum for strength and durability
	</li>
</ul>

This mount works with both 2" and 3" harnesses. 4-Point connection.

The GYTR® Multi-Stage Foam Air Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection. Service with Yamalube® Bio-degradable Foam Air Filter Oil & Cleaner Kit or Foam Filter Oil.

Designed by Yamaha’s advanced team of engineers, the all-new Genuine Yamaha Technology Racing (GYTR) Turbo Kit is more powerful and easier to install than previous model years. The GYTR Turbo Kit uses the renowned Garrett GT2554R turbo to meet Yamaha’s highest standards of reliability, while power delivery is meticulously tuned to provide thrilling, confidence-inspiring performance for all drivers.

This kit is legal for sale in California under the California Air Resources Board executive order D-807U-4.

<ul>
	<li>
	Up to a 60% increase in peak power over stock
	</li>
	<li>
	High performance Garrett GT2554R liquid-cooled ball bearing turbo provides decreased spool time for broad power gains throughout the RPM range
	</li>
	<li>
	Pre-programmed, plug-and-play ECU delivers precise fuel injection settings, enhancing drivability across the entire RPM range for maximum power and maximum fun
	</li>
	<li>
	Large, highly efficient water-to-air intercooler is easier to install, while an integrated cooling fan increases charge-air cooling capacity and prevents heat soak when idling
	</li>
	<li>
	SAE 310S cast stainless steel exhaust manifold reduces weight and eases installation
	</li>
	<li>
	Lightweight molded-silicone intake is less susceptible to power-robbing &ldquo;heat soak&rdquo;
	</li>
	<li>
	The high flow air box located between the vehicle&rsquo;s occupants on the rear panel features a GYTR-branded lid, allows easy, tool-free air filter access, maximizes air intake, and minimizes water/dust intrusion
	</li>
	<li>
	Heightened &ldquo;turbo whistle&rdquo; sound for ultimate excitement
	</li>
	<li>
	Relocated water pump is easier to service, bleed and install
	</li>
	<li>
	Dealer installation recommended
	</li>
	<li>
	IMPORTANT: Requires the use of premium 91-octane gas
	</li>
</ul>

These heated seat covers are the epitome of passenger comfort for cold weather conditions.

&nbsp;

<ul>
	<li>Constructed of tough, durable, 600 denier, solution-dyed fabric</li>
	<li>Controller simply plugs into the AC outlet</li>
	<li>Hook-and-loop attachment straps</li>
	<li>Automatic 15 minute shut-off safety feature</li>
	<li>Sold individually</li>
	<li>See Specification Tab for approximate temperatures</li>
</ul>

The RAM Mounts LED Spotlight has been redesigned with a new LED bulb yielding a brighter, more efficient light for added safety while keeping a lower power draw to your ATV, boat or vehicle.

A collaboration with RAM.

The weather-resistant body shields the 30-degree spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location. Consists of a u-bolt base that makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Included in this package is hardware for tubing that is 0.50&quot; to 1.25&quot; in diameter.

<ul>
	<li>12 Volts DC</li>
	<li>9 Watts</li>
	<li>1900 Lumens</li>
	<li>Sealed Beam</li>
	<li>30-Degree Spot Light</li>
	<li>Frosted Lens</li>
	<li>4500K Color Temp</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES