rootCategory.motorcycle.motorcycle-accessories

Yamaha Genuine

GYTR

Star Custom Accessories

Arlen Ness

SHAD

Cycra

Pyramid

Matrix Concepts

J&M Motorcycle Audio

Yoshimura

Nelson-Rigg

Techmount

Daytona

D’COR Visuals

Graves Motorsports

Vforce

Black

Blue

White

Raven

Midnight

Black/Silver

Clear

Silver

Carbon Fiber

Black/Red

Blue/Black

Matte Black

Blue/Silver

Black/White

Matte Gray Aluminum

Black/Blue

Light Gray

Silver/Black

Oxblood

Black/Gray

Armor Gray

Matte Silver

Carbon

Gray

Performance Black

Team Yamaha Blue w/ Logo

White/Blue

Matte Gray

Liquid Graphite

Smoke

Blue/White

Intensity White

Candy Red

Chrome

Envy Green

Rapid Red

Yamaha Blue

Motorcycle

series

Series

Protection

Storage

Performance

Trim & Accents

Windshields & Wind Protection

Seats

Backrests & Racks

Handlebars & Controls

Covers

Stands & Spools

Body

Lighting

Foot Controls

Electrical

Locks & Security

Heated Accessories

Wheels & Tires

Audio and Tech

Tools

Graphics, Stickers & Decals

Mats

Gauges & Displays

product_category

Product Category

$0.00 - $999.99

$2,000.00 - $2,999.99

$3,000.00 - $3,999.99

price

Price

brand

Brand

Height: Tall

mm: 36

Medium

mm: 14

Height: Short

size

Size

color

Color

The GYTR Enduro Glide Plate is the ultimate in protection when gliding over obstacles. This easy-to-install upgrade is made of 3.2 mm aluminum and features billet aluminum mounting brackets. Water pump and coolant hose protection integrated into glide plate design.

This complete flywheel assembly features an increase in inertia mass that smoothes the power delivery. Helps get power to the ground and keep your momentum up through corners and tricky sections. Easy to install, allowing you the opportunity to change flywheels for different types of riding.

&nbsp;

NOTE: Flywheels are measured by inertia weights because the affect of the weight differs depending on where it is in relation to the center of the crank. A 4 oz. and 6 oz. weight might have the same effect depending on where they are positioned in relation to the center of the crank.

The GYTR® High Compression Piston Kit provides a performance boost throughout the RPM range while maintaining a high level of durability. Machined valve pockets provide additional valve clearance when used with higher lift camshafts. The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

Note: For use on 2014-2015 YZ250F models, you must replace stock oil nozzle with newer component #1SM-15155-10-00 for proper function of GYTR High Compression Piston.

The GYTR® 1SL (2014-2016 YZ450F) High Compression Piston Kit provides a performance boost throughout the RPM range while maintaining a high level of durability. Machined valve pockets provide additional valve clearance when used with higher lift camshafts. The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Two-ring design provides less drag and more horsepower than stock three-ring design
	</li>
	<li>
	Boosts engine compression ratio to 14:1
	</li>
	<li>
	Uses stock gaskets (not included)
	</li>
</ul>

Note:&nbsp;GYTR Oil Sprayer is required for installation

The GYTR Hydraulic Clutch Kit is specially tuned to optimize disengagement zone, decrease lever load and minimize maintenance. Self-adjusts to clutch heat and wear in all conditions to eliminate the need for manual clutch lever adjustment.

Simple bolt on installation (no need to modify engine cases).

Contains:

<ul>
	<li>GYTR Brembo Clutch Lever Replacement #BHR-H3922-V0-00</li>
	<li>GYTR Brembo Hydraulic Master Cylinder Assembly Replacement #BHR-F6450-V0-00</li>
	<li>GYTR Hydraulic Clutch Braided Line Replacement #BHR-F6472-V0-00</li>
	<li>GYTR Hydraulic Clutch Piston Seal Kit #BHR-F63A2-T0-00</li>
</ul>

Adjust your stock carburetor for riding conditions with this GYTR Jet Kit. Designed to be used in conjunction with the GYTR High Flow Air Filter.

The GYTR MX Glide Plate is constructed of high-molecular-weight polyethylene. The MX Glide Plate is a flexible, lightweight and low drag coefficient alternative to aluminum glide plates when needing a smooth surface for “gliding” over obstacles. Water pump and coolant hose protection integrated into glide plate design.

These billet aluminum soft anodized axle blocks are reversible and offset. They keep the adjustment bolts from extending too far back when running the rear wheel toward the back of the swingarm for maximum wheelbase.

This oil sprayer is precision constructed out of CNC machined aluminum with a special 2-hole design.

&nbsp;

<ul>
	<li>
	Manufactured to exact tolerances for performance and durability
	</li>
	<li>
	Provides additional under piston lubrication
	</li>
	<li>
	Required for usage of GYTR Piston
	</li>
</ul>

Maximize your top-end horsepower with this Performance Camshaft Kit.

&nbsp;

<ul>
	<li>Ground to exact specifications using special CNC cam-grinding machines</li>
	<li>Special billet alloy construction provides consistent machined surfaces for increased durability</li>
	<li>Cams include durable stock cam gears and de-comp installed, degreed-in and ready to install</li>
	<li>No costly core charges or deposits or exchange programs that can add to downtime</li>
	<li>Designed for modified engines equipped with a high compression piston</li>
</ul>

GYTR® Pivoting Levers are designed with a folding-pivot blade that will fold in the event of a tip-over. Pivot ratio mimics stock for excellent performance.

Keep your motorcycle protected from dust at the track or in your garage with this Yamaha cover.

&nbsp;

<ul>
	<li>Traditional Yamaha racing blue color featuring the GYTR, Yamalube and bLU cRU&reg; logos</li>
	<li>Lightweight material that can be quickly rolled up into the convenient attached storage bag</li>
	<li>Water resistant</li>
	<li>Equipped with a drawstring at the bottom to keep the cover in place</li>
</ul>

NOTE: Recommended for storage use only; not for trailering or transport

Constructed of lightweight aluminum for an optimized strength-to-weight ratio. Thinner and lighter material is possible due to the rolled edges that provide extra strength. Structural ribs run along the sides of the braces to limit radiator damage from side impact. All required mounting hardware included. No trimming of the plastics is required to install.

<ul>
	<li>Ultra-strong 5052 Aluminum</li>
	<li>OE Hardware</li>
</ul>

For closed-course competition use only.

These GYTR radiator cages offer another level of protection against serious radiator damage.

&nbsp;

<ul>
	<li>Full cage with rod design</li>
	<li>Lightweight yet sturdy constructed with formed 3.2 mm aluminum to provide strength and protection in the event of side impacts</li>
	<li>Small modification can be done on radiator shroud to reduce overall width increase</li>
	<li>Easy-to-install design means radiator removal is not required</li>
	<li>Installs in minutes&nbsp;</li>
</ul>

This billet rear brake clevis is machined to extremely tight tolerances which minimizes lateral movement or vibration of the rear brake pedal. This clevis allows for more height adjustment and features a titanium clevis pin that is half the weight of stock.

The GYTR Shifter Kit enhances rider control by limiting chassis movement. This is achieved by eliminating the need to come off the throttle and still allow clutch-less upshifting.

<ul>
	<li>
	Same Quick Shift System (QSS) that comes standard on the YZF&reg;-R1 and YZF-R1M
	</li>
	<li>
	Works with standard shift pattern
	</li>
	<li>
	Saves wear and tear on the clutch and transmission
	</li>
	<li>
	Easy plug-and-play installation&nbsp;
	</li>
</ul>

Shorter than the stock seat (3/4" shorter). Fully assembled seat assembly with gripper seat cover. Great for shorter riders. Helps hold rider in seated position. Simple installation and removal.

These top-quality brake lines are designed to not fatigue even under extreme conditions.

The patented FMF Resonance Chamber Technology enhances and refines exhaust pressure. Its  core shape lowers sound level while maintaining maximum power output.

Collaboration with FMF.

<ul>
	<li>Factory Forward Engineering centralizes mass and is less prone to impact damage.</li>
	<li>
	Maintenance is easy &ndash; remove four screws on the front end cap, and the innovative rear end cap simplifies the installation of the spark arrestor (sold separately) or tuning tip inserts.
	</li>
	<li>
	Includes QuietCore&trade; 94 dBA insert.
	</li>
	<li>
	Meets AMA&reg; and FIM sound requirements.
	</li>
	<li>
	It is compatible with stock or FMF&reg; header
	</li>
	<li>
	made in the U.S.A.
	</li>
</ul>

&nbsp;

The GYTR Glide Plate helps glide your bike over obstacles. In addition, the plates provide added protection for the lower frame and engine components.

The GYTR WR450F Competition ECU enables the full performance capabilities of the YZ450FX and smartphone Power Tuner Application.

<ul>
	<li>
	Easy installation
	</li>
	<li>
	Two pre-programed maps
	</li>
	<li>
	Create and upload custom engine maps&nbsp;
	</li>
	<li>
	Launch Control and Traction Control
	</li>
	<li>
	Works with OE-equipped switch and CCU
	</li>
	<li>
	Comes with throttle body screw
	</li>
</ul>

Constructed of billet aluminum and coated with a hard anodized finish. The GYTR® Billet Ignition Cover was developed in conjunction with race teams to provide a stronger cover that limits the risk of loosening oil cap and timing plugs during a race. The improved finish is both durable and attractive. Installation removes the oil cap and large timing plug. Lighter and narrower than stock.

The GYTR Ignition Cover is precision-machined from 6061 aluminum to provide added protection and styling over the OE plastic cover.

<ul>
	<li>Billet</li>
	<li>Machined GYTR logo</li>
	<li>Includes replacement OE gasket and hex head flange bolts to replace OE Phillips head screws</li>
	<li>Exceptionally durable, hard anodized finish&nbsp;</li>
</ul>

The GYTR YZ125 Performance Kit is a comprehensive bolt-on engine kit developed to increase power and improve throttle response while maintaining strict Yamaha reliability standards.

The kit includes:

<ul>
	<li>GYTR CNC Ported Cylinder</li>
	<li>GYTR Two Piece Head</li>
	<li>GYTR Tuned CDI</li>
	<li>GYTR High Compression Piston Assembly (two per kit)</li>
	<li>GYTR Exhaust Valves</li>
	<li>GYTR Jetting Kit&nbsp;</li>
	<li>V Force 3 Reed Valve</li>
	<li>GYTR Silencer</li>
	<li>GYTR Pipe</li>
	<li>GYTR Carbon Fiber Ignition Cover</li>
</ul>

&nbsp;

Note: Requires 91 octane or higher fuel&nbsp;

<ul>
	<li>Titanium / steel exhaust system</li>
	<li>Yamaha jetting specification and race fuel is recommended</li>
</ul>

&nbsp;

The GYTR Radiator Braces are designed to provide additional support and strength to limit radiator damage from side impact.

&nbsp;

<ul>
	<li>Made of lightweight 2.5mm 5052 aluminum</li>
	<li>Feature a center steel support bar for strength</li>
	<li>Does not require radiator removal for installation</li>
	<li>Stamped with the GYTR logo</li>
	<li>Includes 8mm hex-head hardware and all necessary mounting hardware</li>
</ul>

The GYTR Ignition Cover is precision-machined from 6061 aluminum for added protection and styling over the OE plastic cover. Features a machined GYTR logo. Includes replacement OE gasket and hex head flange bolts to replace OE Phillips head screws. Exceptionally durable, hard anodized finish.

Replace the stock peg-style brake pedal for rider comfort and additional custom styling.

Constructed of billet aluminum and coated with a hard anodized finish. The GYTR Billet Ignition Cover was developed in conjunction with race teams to provide a stronger cover that limits the risk of loosening oil cap and timing plugs during a race. The improved finish is both durable and attractive. Installation removes the oil cap and timing plugs.

The YZ250F High-Performance Kit conveniently combines GYTR performance parts into one kit to maximize the power of your bike.

&nbsp;Kit includes:

<ul>
	<li>
	GYTR Cylinder Head
	</li>
	<li>
	GYTR High Compression Piston
	</li>
	<li>
	GYTR Air Flow Kit
	</li>
	<li>
	Pre-programmed Vortex ECU &ndash; tuned specifically for this combination of performance accessories
	</li>
	<li>
	Top End Gasket Kit
	</li>
	<li>
	Replacement GYTR Ported Head Assemby #B7B-E11B0-T0-00
	</li>
</ul>

The YZ250F GYTR Performance Ported Head Kit increases horsepower and torque across the entire YZ250F power curve.

Developed and used by Yamaha race teams, the kit offers professional-level performance while maintaining strict Yamaha durability standards.&nbsp;The head comes fully assembled and ready to install. Yamaha has developed two specific GYTR Yamaha Power Tuner maps to optimize performance.

<ul>
	<li>Used by Yamaha race teams</li>
	<li>Increases horsepower and torque across the entire power curve&bull;Fully assembled, adjusted and ready to install</li>
	<li>Designed for AMA-approved fuels (T4, Pro6)</li>
	<li>15.4:1 Compression Ratio with GYTR High Compression Piston Kit&bull;Machined GYTR logo</li>
</ul>

Highly recommend use with the GYTR High Compression Piston Kit #B7B-E16A0-V0-00

The GYTR YZ250F/YZ250FX Weighted Flywheel provides excellent traction and control in hardpack and low-traction conditions. Also reduces low-speed stalls and decreases engine braking feel.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES