rootCategory.golfcar.golfcar-accessories

Yamaha Genuine

Kenda

SSV Works

Flow-Rite

Club Pro Products

Philadelphia Scientific

Millennia

Eagle

EcoXGear®

Black

Silver

Black Satin

Black Machine

Taupe

Gray

Beige

Gold

Smoke

Brown

Silver Machine

White

Clear

Black Satin with Machine Groove

Bronze

Black/Bronze

Bronze with Machine Groove

Gunmetal

Black Gloss with Machine Edge

Linen

Sand

Lighting

Wheels & Tires

Windshields & Wind Protection

Batteries & Chargers

Golf Accessories

Audio and Tech

Protection

Overfenders & Flares

Coolers

Electrical

Trim & Accents

Storage

Seats

Heated Accessories

Covers

Sun Tops

Graphics, Stickers & Decals

Tune-Up Kits

Mirrors

Gauges & Displays

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$4,000.00 - $4,999.99

price

Price

brand

Brand

Inch: 1.5

Inch: 1

size

Size

color

Color

This easy, direct replacement PTV wheel assembly includes Kenda Loadstar 205/65-10 DOT tire with chrome acorn lug nuts, valve stem and Yamaha Tuning Fork logo chrome center cap. Machined finish. (Sold individually).

WARNING: Cancer and/OR Reproductive Harm <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

Incorporate your bold style through your Yamaha with our 10" 16-spoke wheels. Each wheel assembly is sold separately.

Venture on and off the trail with the added protection of one of our Front Brush Guards that seamlessly integrates with the front profile of your UMAX. Additionally, protect the bold look of the grill, hood, and cowl longer.
<ul>
<li>E-coat and satin, black powder-coated finish with a durable, textured surface that matches roof supports and arm rests</li>
<li>Easily mounts to frame rail using four bolts</li>
<li>Reuses skid plate</li>
<li>Pre-drilled holes for easy installation</li>
<li>Durable, 1.5" bent steel tubing construction that accommodates a wide variety of mounts (to add auxiliary lighting)</li>
<li>3mm-thick mounting tabs allow for the addition of auxiliary lights</li>
<li>Includes front brush guard, mounting hardware, and detailed installation instructions</li>
</ul>
WARNING: This product may expose you to chemicals, including lead, which is known by the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to: <a href="http://www.P65Warnings.ca.gov" target="_blank">www.P65Warnings.ca.gov</a>.

Make going off trail a breeze with this 12-Spoke J-Series All-Terrain Alloy Wheel Assembly that will give you better traction and a ready-to-rumble appearance.

V-Series alloy wheel assembly features the Kenda Kruizer KR20A tire, the golf car industry's first true automotive steel-belted radial design tire specifically designed for Low Speed (LSV) and Personal Transportation Vehicles (PTV) that are approved to be used on golf courses and in golf course communities. Combined with the all-new V-Series alloy wheel by Wheel Mate Products for the ultimate driving experience.

Designed to fit 2010-2016 The DRIVE&reg; PTV cars. This Premium Headlight Upgrade Kit includes everything you need to upgrade your factory installed headlights and taillights to LED tail lights/brake lights, LED turn signals, 4-way flasher. Includes automotive turn signal stalk with built-in horn switch.&nbsp;

When installing Premium headlight kits with brake lights on a 2012.5-2016 The Drive, Adventurer Sport 2+2 or Concierge and 2012.5-2017 Adventurer One, Adventurer Two, or Adventurer Sport; you must also purchase new brake light components to be installed with the complete and upgrade highlight kits.&nbsp; Sold separately. Dealer installation recommended. Wiring modification required.

&nbsp;

Our proprietary Yamaha-spec vinyl is mold and mildew-resistant and designed to exceed accessory testing requirements, providing superior durability against vibration, heat aging, wear, and weatherability.

These seats feature an OEM plastic seat base, large bolstering to keep occupants securely in place, plus increased foam thickness and softness.

&bull; Uses OEM plastic seat bases

&bull; Large bolstering for bucket-like seat comfort

&bull; Increased foam thickness and softness

&bull; Largest occupant seating area

&bull; Virgin molded, dual-density foam

&bull; Designed by in-house styling team to precisely match unit styling

&bull; Cut &amp; Sew manufacturing with double-French seam stitching

&bull; Stitching all taped with water-resistant tape on underside to prevent foam absorbing moisture

&bull; Exceeds Yamaha&rsquo;s stringent testing requirements for durability and UV protection

&bull; Industry-leading 3-Year Limited Genuine Accessory Warranty

&nbsp;

Seat bottom and back sold separately, available as complete set by ordering: J0B-K8410-V0-00 (Beige), J0B-K8410-T0-00 (Black), J0B-K8410-S0-00 (Brown), J0B-K8410-R0-00 (Gray).

Reuses OEM, factory seats mounting hardware, seat hinges and arm rests.

SSV Works’ new Premium 6.5” Marine-Grade Weatherproof Speakers will transform the sound of your golf car stereo!

A collaboration with SSV Works.

Get louder, cleaner sound. Engineered specifically for open air environments, the new WP-A6 weatherproof speaker brings audiophile-grade components to the outdoors. The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard while crusin&rsquo; with the family. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low-profile with optimal weatherproofing. SSV Works WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps. Reliability meets control with the Santoprene surround; a 30% lighter thermoplastic elastomer surrounding the polypropylene cone for exceptional volume and clarity in the harshest conditions.

 
The SSV Works WP-A6 speaker features a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter what music you listen to, your speakers will keep on rockin&rsquo; with 4ohms and 60w RMS/120w peak power. Covered by SSV Works&rsquo; limited 1-Year warranty. Kit includes pair of loaded pods with WP-A6 speaker, pair of 1&quot; square clamps, short extension harness, speaker Y-harness, and all mounting hardware. Custom wiring may be required. Professional installation recommended.

&nbsp;

Quick, Simple Installation

<ul>
	<li>Direct plug-and-play into the SSV Works MRB3 and MRB2 head units</li>
	<li>Universal harness length for a variety of configurations 
	&nbsp;</li>
</ul>

Aluminum Dual-Clamp Mounting System

<ul>
	<li>Adjustable mount for forward or rear-facing</li>
	<li>Powder-coated for durability</li>
	<li>Stainless-Steel Hardware</li>
</ul>

SSV Works A6 Speaker

<ul>
	<li>Matches Yamaha Overhead Audio System by SSV Works</li>
	<li>Fully weatherproof</li>
</ul>

&nbsp;

Requires:&nbsp;

<ul>
	<li>Requires SSV Works Overhead Audio System #J0G-H81C0-V0-00, or SSV Works MRB2/MRB3 head unit, sold separately</li>
</ul>

 
Recommended:

<ul>
	<li>Complete the audio package with our 10&quot; 500W Powered Subwoofer by SSV Works #J0D-H81S0-V0-00</li>
</ul>

Adds amber chip-on-board (COB) front turn signals, 20-LED rear brake/ tail/ turn lights, and 4-way flashers.

Includes premium automotive style turn signal switch/ module and brake switch with all brackets and hardware.

These 2.5” Accessory Pod Lights are a great addition to point light where your headlights can’t reach. These 10W LEDs shine an extremely bright beam while drawing very little power. Their compact size makes them versatile and allows you to mount them just about anywhere on your SxS.

&nbsp;

<ul>
	<li>Can be mounted on any flat area</li>
	<li>Can be mounted on Wolverine X2/X4 accessory front and rear brush guards, sold separately</li>
	<li>360&deg; adjustability</li>
	<li>Wolverine RMAX 1000 LE and XT-R require Front Pod Light Mount Kit #B4J-H4010-V0-00, sold separately</li>
	<li>Sold in pairs and includes a harness and switch</li>
</ul>

Shown on YXZ1000R and UMAX light utility vehicle.

This three-sided enclosure perfectly complements the Club Pro Products Cabana Golf Bag. Install in as little as five minutes with a patented extrusion system.

A collaboration with Club Pro.

The back panel allows access to the sweater basket. The cover disappears into a zipped sleeve when not in use.

NOTE: Will not work with fold-down Drive2 windshields.

R-Series alloy wheel assembly features the Kenda&reg;&nbsp;Kruizer KR20A tire, the golf car industries first &ldquo;True Automotive Steel-Belted Radial Design&rdquo; tire specifically designed for Low Speed (LSV) and Personal Transportation Vehicle (PTV) platforms that is approved to be used on golf courses and in golf course communities. The Kenda&reg; KR20A tire&rsquo;s high-performance directional tread pattern enhances steering and ride performance. Industry leading steel-belted radial tire construction has improved rolling and wear characteristics giving longer life over less expensive bias-ply tires. Combine with the all-new R-Series alloy wheel by Wheel Mate&reg; Premium Golf Cart Wheels for the ultimate driving experience. Sold Individually.

&nbsp;

Available finishes: Black Machine, All-Satin Black, Gloss Black with Machine Edge and Black with Bronze Color-Clear.&nbsp;

<ul>
	<li>Machine finishes include chrome lug nuts, valve stem, chrome valve stem cover, chrome valve stem cap, and Yamaha Tuning Fork logo on chrome center cap.</li>
	<li>All-Satin Black and Color-Clear finishes include satin black lug nuts, black valve stem, black valve stem cap, and Yamaha Tuning Fork logo on satin black center cap.</li>
</ul>

&nbsp;

Rim Features:

<ul>
	<li>Elegant curved spokes with narrow lip for a refined sport design</li>
	<li>Deep lug nut pockets in recessed center section for modern appearance</li>
	<li>100%-virgin aluminum ingots</li>
	<li>Clear-coated to protect finish</li>
	<li>Lightweight construction for reduced rolling resistance</li>
	<li>Stealth, snap-in center cap design with Yamaha Tuning Fork Emblem</li>
</ul>

&nbsp;

Steel-Belted Radial Tire Benefits:

<ul>
	<li>Proprietary tire compound for decreased tire wear</li>
	<li>Improved ride performance</li>
	<li>Improved rolling characteristics for extended range</li>
	<li>Improved tread pattern for maximum smoothness</li>
	<li>High-performance directional tread pattern enhances performance and steering</li>
	<li>E-Marked and Reach Compliant for international markets requirements</li>
</ul>

J-Series alloy wheel assembly features the Kenda® Kruizer KR20A tire, the golf car industries first “True Automotive Steel-Belted Radial Design” tire specifically designed for Low Speed (LSV) and Personal Transportation Vehicle (PTV) approved for golf courses and communities.

The Kenda&reg; KR20A tire&rsquo;s high-performance directional tread pattern enhances steering and ride performance. Industry leading steel-belted radial tire construction has improved rolling and wear characteristics giving longer life over less expensive bias-ply tires. Combine with the all-new J-Series alloy wheel by Wheel Mate&reg; &nbsp;Premium Golf Cart Wheels for the ultimate driving experience. Sold individually.

&nbsp;

<ul>
	<li>Machine finishes include chrome lug nuts, valve stem, chrome valve stem cover, chrome valve stem cap, and Yamaha Tuning Fork logo on chrome center cap.</li>
	<li>Satin Black finishes include satin black lug nuts, black valve stem, black valve stem cap, and Yamaha Tuning Fork logo on satin black center cap.</li>
</ul>

&nbsp;

Rim Features:

<ul>
	<li>Symmetrical beveled spokes for a sophisticated full-face design</li>
	<li>Deep lug nut pockets for luxurious appearance</li>
	<li>Made from 100%-virgin aluminum ingots</li>
	<li>Clear-coated to protect finish</li>
	<li>Lightweight construction for reduced rolling resistance</li>
	<li>Stealth, snap-in center cap design with Yamaha Tuning Fork Emblem</li>
</ul>

&nbsp;

Steel-Belted Radial Tire Benefits:

<ul>
	<li>Proprietary tire compound for decreased tire wear</li>
	<li>Improved ride performance</li>
	<li>Improved rolling characteristics for extended range</li>
	<li>Improved tread pattern for maximum smoothness</li>
	<li>High-performance directional tread pattern enhances performance and steering</li>
	<li>E-Marked and Reach Compliant for international markets requirements</li>
</ul>

Jam out to some tunes by easily pairing your phone with Bluetooth 5.0 for a long range wireless connection. Mountable virtually anywhere with universal attachment points and integrated threaded mounting holes.

Includes remote to control volume, play/pause, change track or easily adjust the LED Party Lights and LED Light Bar.&nbsp;

Features AM/FM and Bluetooth with built-in microphone for speakerphone calls. Aux-In port to play audio from a wired device, Aux-Out port to daisy chain to other wired speakers, and a 5V USB charge port to make sure your phone keeps the party going. Easily connect additional 12V accessories or soundbars with the 12V 10A auxiliary output connector. Huge sound in small package at only 25.5&rdquo; long x 4.5&rdquo; tall (6.5&rdquo; tall with mounts).

Includes 6&#39; fused power lead, auxiliary power out mating connector, 2x mounting brackets, adjustable clamps, RF remote and universal mounting hardware.

<ul>
	<li>EcoCast. Allows up to 100 soundbars to be connected together or connected to any ECOXGEAR speaker with the EcoCast feature</li>
	<li>RGB Party Lights. Choose from Red?Green/White/Blue Solid, Sync to Music</li>
	<li>Integrated LED Light Bar. 3 color options &nbsp;(red, white, dimmed white)</li>
	<li>500W Total Peak Power. 8 total speakers - Dual Woofers, 4 mid-range and 2 tweeters. Two independently sealed cavities for true left and right stereo sound</li>
	<li>IP66 rated with Marine-Grade Speakers. 100% water, dirt and dust proof enclosure</li>
</ul>

&nbsp;

Fitment. Universal for most 12V vehicles including golf cars, boats, side-by-side vehicles, and ATV&rsquo;s.

Requires. Custom mounting solution and wiring to 12V source.

Recommended. 48-12V Regulator Kit for 2017~ Drive2 AC Electric, #J0J-H1910-V0-00, sold separately

This three-sided taupe enclosure perfectly complements the Club Pro Products® Cabana.

Install in as little as 5 minutes with a patented extrusion system. The back panel allows access to the sweater basket. The cover disappears into a zippered sleeve when not in use.

Engineered by Yamaha for The DRIVE Golf Car. This complete kit has all you need to lift your car by 2". Professional installation recommended.

Customize your DRIVE2 golf car with Yamaha designed, projector LED headlights. The standard kit adds factory LED headlights and incandescent taillights, horn, and side reflectors via a non-expandable standard harness.

&nbsp;

Yamaha Genuine Light Kits are designed by Yamaha engineers to precisely fit each model. Kits include all necessary mounting hardware. Electric kits include a 48V regulator.

<h2>YAMAHA GENUINE LIGHT KIT ADVANTAGE</h2>

<ul>
	<li>
	Yamaha designed projector LED headlight with ultra-low energy consumption and 40,000 hour life expectancy
	</li>
	<li>
	LED headlight has geometrically tuned reflector for long range and increased output
	</li>
	<li>
	LED headlight has 613% larger light field, double the brightness and 54% improvement in energy consumption over previous halogen headlight
	</li>
	<li>
	All Yamaha light kits include all necessary mounting hardware and detailed instructions with pictures
	</li>
	<li>
	All Fleet electric kits include required 48V regulator
	</li>
	<li>
	All Fleet kits include horn and horn switch
	</li>
</ul>

<h2>YAMAHA GENUINE LIGHT KIT ADVANTAGE</h2>

<ul>
	<li>
	Plug-and-play installation
	</li>
	<li>
	Precut to exact length with sealed, factory connectors
	</li>
	<li>
	No cutting, splicing, crimping or modifications required
	</li>
	<li>
	Factory weather-tight, sealed connectors
	</li>
	<li>
	Constructed of 16-gauge and 18-gauge wire
	</li>
	<li>
	Fully wrapped corrugated tubing and tape at all joints and ends
	</li>
	<li>
	Sealed splices with heat shrink
	</li>
	<li>
	Each harness tested for continuity, opens, and shorts
	</li>
	<li>
	Made in U.S.A.
	</li>
</ul>

Put a soundtrack to your day with our Yamaha Genuine Bluetooth Audio System specifically made for your gas-powered DRIVE or Drive2. Conveniently play your favorite playlists from your phone as you cruise around town to neighborhood locales. 

A collaboration with Milennia.

<ul>
	<li>
	Exclusive plug-and-play power and speaker harnesses
	</li>
	<li>
	Precut to exact length (no cutting, splicing, or crimping required)
	</li>
	<li>
	Conformal coating on circuit board protects from moisture, dust, chemicals, and extreme temperatures
	</li>
	<li>
	Includes Bluetooth&reg; amp, two 3.5-in. two-way 4ohm, 50 W outdoor speakers, plug-and-play harness, stainless steel hardware and detailed installation instructions.
	</li>
</ul>

NOTE: This accessory only fits gas DRIVE and Drive2 Fleet models.

Increase your Yamaha's battery life and run time by using our Deionizer System—a cost-effective, effortless way to purify the water used for battery watering.

Prevent the build-up of impurities over time with this simple addition to your routine service and it&rsquo;ll make a substantial impact on your battery life.&nbsp;For use with Pro-Fill&reg; by Flow-Rite&reg; Regulated Hose Supply (sold separately).

&bull; Includes an intuitive red/green color purity light to notify when the cartridge must be replaced

&nbsp;

A collaboration with Philadelphia Scientifc.&nbsp;

Features a plug-and-play upgradeable premium harness, all new phosphor coated chip-on-board (COB) module that features full-power flashing amber LED front turn signals, the all-new basic amber LED front turn signal chip-on-board (COB) module, 20-diode LED taillight and brake lights, front and rear LED turn signals, 4-way flasher, horn, and side reflex reflectors. Includes Yamaha&rsquo;s exclusive, automotive-style, premium turn signal stalk that incorporates the headlight on/off switch, turn signal handle, and integrated horn button.

Yamaha Genuine Light Kits are designed by Yamaha engineers to precisely fit each model. Kits include all necessary mounting hardware. Electric kits include a 48V regulator.

<h2>&nbsp;</h2>

<ul>
	<li>Yamaha designed projector LED headlight with ultra-low energy consumption and 40,000 hour life expectancy</li>
	<li>LED headlight has geometrically tuned reflector for long range and increased output</li>
	<li>LED headlight has 613% larger light field, double the brightness and 54% improvement in energy consumption over previous halogen headlight</li>
	<li>All Yamaha light kits include all necessary mounting hardware and detailed instructions with pictures</li>
	<li>Plug-and-play installation</li>
	<li>Precut to exact length with sealed, factory connectors</li>
	<li>No cutting, splicing, crimping or modifications required</li>
	<li>Factory weather-tight, sealed connectors</li>
	<li>Constructed of 16-gauge and 18-gauge wire</li>
	<li>Fully wrapped corrugated tubing and tape at all joints and ends</li>
	<li>Sealed splices with heat shrink</li>
	<li>Each harness tested for continuity, opens, and shorts</li>
</ul>

Features a plug-and-play upgradeable premium harness, all new phosphor coated chip-on-board (COB) module that features full-power flashing amber LED front turn signals, the all-new basic amber LED front turn signal chip-on-board (COB) module, LED taillight and brake lights, front and rear LED turn signals, four-way flasher, horn, and side reflex reflectors. Includes Yamaha&rsquo;s exclusive, automotive-style, premium turn signal stalk that incorporates the headlight on/off switch, turn signal handle, and integrated horn button.

Have a precisely engineered, custom-fitted sun top to keep cool and comfortable while cruising around your community. With an over-the-top, trackless design installation is quick and easy so you can seamlessly move it from car to car without hassle.

<ul>
	<li>Securely fastens with hook-and-loop straps</li>
	<li>Heat-welded seams between the clear vinyl and side panels</li>
	<li>Available in heavy duty, marine-grade, 1300D vinyl or marine-grade, 600D, 100% solution-dyed polyester fabric</li>
	<li>UV- and mildew-/mold-resistant</li>
	<li>Limited one-year warranty for vinyl (two years for fabric)</li>
</ul>

&nbsp;

Note: Over-the-top enclosures cannot be used with DRIVE Club Cover #GCA-JW160-14-SD or Cabana Bag Cover(s) #GCA-J0A60-00-00/#GCA-J0A60-00-BK, all sold separately

&nbsp;

Available Colors/Fabrics

<ul>
	<li>GCA-J0A65-00-SD Taupe Fabric</li>
	<li>GCA-J0A65-00-00 White Vinyl</li>
	<li>GCA-J0A65-00-LN Acrylic/Linen</li>
</ul>

Need more bass in your space? SSV Works Premium Marine Subwoofer started the revolution. They produce great volume and clarity designed for the outdoor environment for the powersport enthusiast.

A collaboration with SSV Works.

Amplified subwoofer system expands your Overhead Audio Kit, #J0G-H81C0-V0-00 (sold separately) with an easy plug and play solution.

 
SSV Works custom molded sub enclosure is designed specifically for the SSV-10M 10&rdquo; 600-watt (300w RMS) subwoofer to pair perfectly with SSV Work&rsquo;s 500-watt powered amplifier engineered for optimal performance in a small, compact package. Easily installs in bag well area and even works with most rear seat kits. Includes additional mount plates and hardware to a ensure rigid mounting system to eliminate movement for bass that you can feel. Enclosure is thick roto-molded plastic for the best sound quality and bass response. Finished in a black texture coat for high quality appearance to match factory OE plastic components. Covered by SSV Works&rsquo; limited 1-Year warranty.

 
Kit includes powder-coated golf car bagwell mounting brackets, subwoofer extension harness, fused power harness, all mounting hardware and step-by-step installation instructions. Custom wiring may be required. Professional installation recommended.

 
Plug-and-play with any of SSV Works&rsquo; MBR2 or MBR3 media-receivers. Ability for custom subwoofer solution with full compatibility with marine-grade amps with 4v low-level RCA inputs (speaker to RCA adapter required, sold separately). Innovative sub enclosure mounts and pre-thread nutserts provide options for universal mounting for custom applications.

&nbsp;

Quick, Simple Installation

<ul>
	<li>Direct plug-and-play into the SSV Works MRB3 and MRB2 head units</li>
	<li>Universal harness length for a variety of configurations</li>
</ul>

 
Power-coated Steel Mounting System

<ul>
	<li>Utilizes factory bagwell mounts</li>
	<li>4 mounting tabs included for additional mounting options</li>
	<li>Powder-coated for durability</li>
</ul>

 
SSV Works WP-10M Subwoofer

<ul>
	<li>600-watt peak / 300-watt RMS</li>
	<li>0.5 ohm ultra-efficient</li>
</ul>

 
SSV Works 500-watt powered amplifier

<ul>
	<li>Built-in gain control</li>
	<li>Switchable frequency 50/100/150Hz</li>
</ul>

&nbsp;

Requires: 
Requires SSV Works Overhead Audio-System #J0G-H81C0-V0-00, or SSV Works MRB3 or SSV Works MRB2 head unit, sold separately. Electric models require 48Vdc Input to 12Vdc Output converter capable of supplying 16A Constant (20A Peak) 12V power. Not available through Yamaha. Contact local dealer for custom installation requirements.

 
Recommended: 
Complete the audio package with our 6.5&rdquo; Speaker Pod Kit by SSV Works, #J0D-H81D0-V0-00.

Stay out of the sun&#39;s glare, guarded from the elements, and away from hanging brush with the only sun top designed to completely match your UMAX in style and durability.&nbsp;

<ul>
	<li>Helps protect passengers from sun, rain, and hanging brush</li>
	<li>Drain channel helps keep passengers dry</li>
	<li>Strategic mounting locations great for future accessories</li>
	<li>Includes sun top cover, sun top supports, grommets, and all necessary hardware</li>
</ul>

Instead of playing music through your phone speakers, enjoy your favorite tunes through the Yamaha Genuine Overhead Stereo equipped with Bluetooth® and AM/FM radio and can withstand the harshest conditions, takes up none of your cargo space, and gives you impeccable sound quality. 

<ul>
	<li>
	Fully weatherproof
	</li>
	<li>
	3.5mm AUX-in and USB charging
	</li>
	<li>
	New SSV Works&reg; waterproof, marine-grade, 6.5&quot; speakers
	</li>
	<li>
	Six Preset Equalizer options
	</li>
	<li>
	Bluetooth&reg;, AM/FM tuner with LCD backlit display and internally integrated antenna
	</li>
	<li>
	Integrated, hyper-white, six LED dome light
	</li>
	<li>
	Includes wiring, mounting hardware, and step-by-step instructions (simple 2-wire installation)
	</li>
</ul>

NOTE:

Requires The DRIVE/Drive2 Sun Top Kit #JW1-XK83A-20-00, The DRIVE/Drive2 82&quot; Extended Sun Top Kit #GCA-JW198-22-00, sold seperately.

Requires Yamaha Genuine Light Kit in order to be plug-and-play. Models not featuring Yamaha Genuine Light Kit require custom wire modifications.&nbsp;Electric fleet models require 48V/12V Regulator, sold separately.

Precision engineered for a custom fit for each sun top. Features an over-the-top, trackless style design. Installation is quick and easy with no tracks or hardware to install. No modification or drilling required. Can be installed and removed in minutes. No unsightly tracks when enclosure is removed from car. Can be moved from unit to unit without any hassle. Attaches to front support with wrap around hook-and-loop front sleeves. Securely fastens to bottom of unit with adjustable, hook-and-loop straps. The rear of the enclosure fastens to the underside of the sun top with hook-and-loop straps. Features heat-welded seams between the clear vinyl and side panels.&nbsp;

&nbsp;

Available in:

<ul>
	<li>Heavy duty, marine-grade, 1300D vinyl</li>
	<li>Marine-grade, 600D, 100% solution-dyed poly fabric</li>
</ul>

Both materials are UV and mildew/mold resistant.

Customize your DRIVE2 golf car with Yamaha designed, projector LED headlights.

The basic kit adds factory LED headlights, incandescent tail lights, horn and side reflex reflectors. Features expandable wire harness to easily upgrade using Yamaha&rsquo;s expansion kits. Upgrade to brake lights only, basic amber LED front turn signal chip-on-board (COB) module, or premium white LED accent/amber LED front turn signal COB module with clear lens.

Yamaha Genuine Light Kits are designed by Yamaha engineers to precisely fit each model. Kits include all necessary mounting hardware. Electric kits include a 48V regulator.

ADVANTAGES

<ul>
	<li>Yamaha designed projector LED headlight with ultra-low energy consumption and 40,000 hour life expectancy</li>
	<li>LED headlight has geometrically tuned reflector for long range and increased output</li>
	<li>LED headlight has 613% larger light field, double the brightness and 54% improvement in energy consumption over previous halogen headlight</li>
	<li>All Yamaha light kits include all necessary mounting hardware and detailed instructions with pictures</li>
	<li>All Fleet electric kits include required 48V regulator</li>
	<li>All Fleet kits include horn and horn switch</li>
</ul>

<h2>&nbsp;</h2>

<ul>
	<li>Plug-and-play installation</li>
	<li>Precut to exact length with sealed, factory connectors</li>
	<li>No cutting, splicing, crimping or modifications required</li>
	<li>Factory weather-tight, sealed connectors</li>
	<li>Constructed of 16-gauge and 18-gauge wire</li>
	<li>Fully wrapped corrugated tubing and tape at all joints and ends</li>
	<li>Sealed splices with heat shrink</li>
	<li>Each harness tested for continuity, opens, and shorts</li>
	<li>Made in U.S.A.</li>
</ul>

Give your car a unique look and more luxurious feel by replacing your original seats with these stylish, upgraded touring seats, available in four eye-catching colors&mdash;gray, beige, brown, and black&mdash;complete with contrast stitching and embossed tuning fork logos.
Our proprietary Yamaha-spec vinyl is designed to exceed accessory testing requirements, providing superior durability against vibration, heat aging, and more.
These seats feature an OEM plastic seat base, large bolstering to keep occupants securely in place, plus increased foam thickness and softness&mdash;all while retaining Yamaha QuieTech technology.
<ul>
<li>Uses OEM plastic seat base - No wood here!</li>
<li>Retains Yamaha QuieTech technology</li>
<li>Large bolstering for bucket-like seat comfort</li>
<li>Increased foam thickness and softness</li>
<li>Largest occupant seating area</li>
<li>Virgin molded, dual-density foam</li>
<li>Designed by in-house styling team to precisely match unit styling</li>
<li>Cut &amp; Sew manufacturing with double-French seam stitching</li>
<li>Stitching all taped with water-resistant tape on underside to prevent foam absorbing moisture</li>
<li>Exceeds Yamaha's stringent testing requirements for durability and UV protection</li>
<li>Industry Leading 3-Year Limited Genuine Accessory Warranty</li>
</ul>

You&rsquo;ve got a long workday planned. Leave none of your essentials behind with our heavy-duty, durable cargo box that doubles as a non-insulated cooler featuring an integrated drain plug. You&rsquo;ll enjoy easy installation and optimum box capacity while matching your UMAX&rsquo;s uniquely rugged style.

<ul>
	<li>Works great with or without the UMAX Cargo Bed Mat, sold separately</li>
	<li>Water- and dust-resistant, sealed lids utilize rubber ball-and-socket straps</li>
	<li>Includes cargo box, mounting hardware, and detailed installation instructions</li>
</ul>

The premium kit adds factory LED headlights, the all new basic amber LED front turn signal chip-on-board (COB) module, 20-diode LED tail light and brake lights, front and rear LED turn signals, 4-way flasher, horn, and side reflex reflectors. Includes Yamaha&rsquo;s exclusive automotive style premium turn signal stalk that incorporates the headlight on/ off switch, turn signal handle and integrated horn button. Features expandable wire harness to upgrade to premium white LED accent/ amber LED front turn signal COB module with clear lens using Yamaha&rsquo;s expansion kit. Premium kits add an all new phosphor coated COB module that features full-power flashing amber LED front turn signals and are easy to install utilizing the OE front amber turn signal lens.

Yamaha Genuine Light Kits are designed by Yamaha engineers to precisely fit each model. Kits include all necessary mounting hardware. Electric kits include a 48V regulator.

YAMAHA GENUINE LIGHT KIT ADVANTAGE

<ul>
	<li>Yamaha designed projector LED headlight with ultra-low energy consumption and 40,000 hour life expectancy</li>
	<li>LED headlight has geometrically tuned reflector for long range and increased output</li>
	<li>LED headlight has 613% larger light field, double the brightness and 54% improvement in energy consumption over previous halogen headlight</li>
	<li>All Yamaha light kits include all necessary mounting hardware and detailed instructions with pictures</li>
	<li>All Fleet electric kits include required 48V regulator</li>
	<li>All Fleet kits include horn and horn switch</li>
</ul>

<ul>
	<li>Plug-and-play installation</li>
	<li>Precut to exact length with sealed, factory connectors</li>
	<li>No cutting, splicing, crimping or modifications required</li>
	<li>Factory weather-tight, sealed connectors</li>
	<li>Constructed of 16-gauge and 18-gauge wire</li>
	<li>Fully wrapped corrugated tubing and tape at all joints and ends</li>
	<li>Sealed splices with heat shrink</li>
	<li>Each harness tested for continuity, opens, and shorts</li>
	<li>Made in U.S.A.</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES