rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Magellan

EcoXGear®

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Air Filter

Covers

Overfenders & Flares

Audio and Tech

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>3,500 lb.: 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

Without sacrificing any style, the Heavy Duty Front Grab Bar protects the front front end, fenders and headlights from brush and trail obstacles. of the Kodiak 450.

<ul>
	<li>
	Integrated mount for easy and convenient installation of Warn AXON winch up to 3500lb.
	</li>
	<li>
	Includes anchor points to securely tie down the front end
	</li>
	<li>
	All-steel 1.5&rdquo; tubing with E-Coated and textured powder coating that matches unit&rsquo;s racks for exceptional durability
	</li>
	<li>
	Easy bolt-on utilizing stock mounting location
	</li>
	<li>
	Conveniently add accessory LED POD lights with integrated mounts
	</li>
</ul>

This rugged Brush Guard is designed to provide additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile of the Kodiak while adding a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by&nbsp;Warn&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

Jam out to some tunes by easily pairing your phone with Bluetooth 5.0 for a long range wireless connection. Mountable virtually anywhere with universal attachment points and integrated threaded mounting holes.

Includes remote to control volume, play/pause, change track or easily adjust the LED Party Lights and LED Light Bar.&nbsp;

Features AM/FM and Bluetooth with built-in microphone for speakerphone calls. Aux-In port to play audio from a wired device, Aux-Out port to daisy chain to other wired speakers, and a 5V USB charge port to make sure your phone keeps the party going. Easily connect additional 12V accessories or soundbars with the 12V 10A auxiliary output connector. Huge sound in small package at only 25.5&rdquo; long x 4.5&rdquo; tall (6.5&rdquo; tall with mounts).

Includes 6&#39; fused power lead, auxiliary power out mating connector, 2x mounting brackets, adjustable clamps, RF remote and universal mounting hardware.

<ul>
	<li>EcoCast. Allows up to 100 soundbars to be connected together or connected to any ECOXGEAR speaker with the EcoCast feature</li>
	<li>RGB Party Lights. Choose from Red?Green/White/Blue Solid, Sync to Music</li>
	<li>Integrated LED Light Bar. 3 color options &nbsp;(red, white, dimmed white)</li>
	<li>500W Total Peak Power. 8 total speakers - Dual Woofers, 4 mid-range and 2 tweeters. Two independently sealed cavities for true left and right stereo sound</li>
	<li>IP66 rated with Marine-Grade Speakers. 100% water, dirt and dust proof enclosure</li>
</ul>

&nbsp;

Fitment. Universal for most 12V vehicles including golf cars, boats, side-by-side vehicles, and ATV&rsquo;s.

Requires. Custom mounting solution and wiring to 12V source.

Recommended. 48-12V Regulator Kit for 2017~ Drive2 AC Electric, #J0J-H1910-V0-00, sold separately

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of wire Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 2,500 pound capacities</li>
	<li>2,500 lb.: 3/16&rdquo; wire rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
	<li>See unit specific fitment for required winch mount and/or wiring kit</li>
</ul>

Provides generous protection from cold, wind, debris to rider’s hands, chest, head for enhanced comfort.

<ul>
	<li>
	&nbsp;Constructed of tough, durable&nbsp;and shatter-resistant polycarbonate
	</li>
	<li>
	&nbsp;Easy on easy off (after initial install) for servicing or towing, etc.
	</li>
	<li>
	&nbsp;Tilt is adjustable
	</li>
</ul>

Replacement blade for the WARN Quick-Detach Plow Kits.

The Plow Mount by WARN® readies your ATV to plow snow, dirt, gravel and more.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

These heavy-duty, durable cargo boxes provide extra luggage space that will allow you to take along your essentials for the ride or the job.

&nbsp;

<ul>
	<li>
	Constructed of durable, low-density polyethylene plastic
	</li>
	<li>
	Front Box: 37L, Rear Box: 66L capacity
	</li>
	<li>
	Water and dust-resistant, sealed lids utilize rubber ball-and-socket straps
	</li>
	<li>
	Both boxes have two 20 oz. cup holders integrated into the design for convenient use while on the trail
	</li>
	<li>
	Mounting location for flag or whip on Rear Cargo Box
	</li>
	<li>
	Designed to mount to front and rear stock racks (not compatible with accessory Rack Extensions) and includes installation hardware
	</li>
</ul>

These Utility ATV Rigid Cargo Boxes feature a solid plastic design for durability with solid integrated hinged lids. Water and dirt-resistant seal and design. Two cam-over elastic latches which can be locked with padlocks. Solid mounting system that works with most Utility ATV racks.

&nbsp;

<ul>
	<li>Front trunk: 30&quot;L x 13&quot;W x 9&quot;H</li>
	<li>Rear trunk: 37&quot;L x 16&quot;W x 14&quot;H</li>
</ul>

The Raptor 700R Special Edition Footwells are constructed of black powder-coated aluminum tube and plate. The footwells features a unique punch-through design that enhances the complete styling of the Raptor 700R.

Requires the use of the Plastic Footwell Extensions.

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

These overfenders feature a tough, aggressive look and a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable TPO plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
</ul>

The Quad Zone ATV Heated Grips by Heat Demon includes heated grips, thumb warmer, controller, DC plug and hardware.

A collaboration with Heat Demon.&nbsp;

Controller offers five levels of heat and four independent heat zones that share one set of display LEDs and setup buttons in a small, compact package. Two auxiliary ports can be used for Heat Demon&reg; Vest or Seat Heater (sold separately) using a 2.5mm DC plug (70 watts each). Totals 40 watts and draws less than 3 amps.

The Dual Zone ATV Heated Grips by Heat Demon include heated grips, thumb warmer, and mountable controller that regulates heat between the thumb and grips. Controller offers five levels of heat, has multiple mounting options, and provides LED light level indicators that dim for night time use. Totals 40 watts and draws less than 3 amps. Fits all 7/8" handlebars.

A collaboration with Heat Demon.&nbsp;

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

This rugged rear grab bar is designed to protect the taillight and total rear end of the ATV.

&nbsp;

<ul>
	<li>
	Constructed of durable bent steel tubing
	</li>
	<li>
	Replaces rear rack support bars
	</li>
	<li>
	Includes mounting points for auxiliary lights
	</li>
</ul>

The Front Winch Mount Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for handlebar-mounted rocker switch</li>
	<li>Power cables</li>
</ul>

The AXON Winch Wiring Kit includes everything needed to wire an AXON Series winch.

A collaboration with WARN&reg;.

<ul>
	<li>
	Digital handlebar-mounted rocker switch
	</li>
	<li>
	Unit-specific wiring
	</li>
</ul>

&nbsp;

Requires accessory Front Grab Bar #B5R-F84L0-V0-00

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

<ul>
	<li>
	Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles.
	</li>
	<li>
	Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.
	</li>
</ul>

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

The GYTR Sport Front Grab Bar features special ball-burnished aluminum tube construction with lower bash plate. &nbsp;The grab bar is designed to be both functional and sporty.

These overfenders feature a tough, aggressive look, and have a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable thermoplastic olefin (TPO) plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
	<li>Minor drilling and trimming may be required</li>
	<li>Includes mounting hardware</li>
</ul>

These rack extensions feature a rugged design and add additional functional space to the standard racks.

&nbsp;

<ul>
	<li>Constructed of bent steel tubing for strength and durability</li>
	<li>Front Rack Extension extends front rack height to just under 6&rdquo;, and rear rack height to 7.5&rdquo;</li>
	<li>Compatible with Gun Boot Mount, Cooler Carrier, and Rack Storage Bags (each sold separately)</li>
	<li>Easy to install to stock racks using included hardware</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES