rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The Front Winch Mount Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for handlebar-mounted rocker switch</li>
	<li>Power cables</li>
</ul>

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

The Power Commander® V is loaded with tons of new features. Now less than half the size of the Power Commander® III USB and USB-powered from a computer, no longer requiring a 9-volt adaptor for programming.

A collaboration with Dynojet Research.&nbsp;&nbsp;

<ul>
	<li>A 2-position map switching function comes built in (map switch not included)</li>
	<li>
	Gear input allows for map adjustment based on gear and speed
	</li>
	<li>
	Analog input allows user to install any 0-5 volt sensor and build an adjustment table based on its input, such as temperature
	</li>
	<li>
	With gear position input connected, the PC V is capable of allowing each cylinder to be mapped individually and for each gear (e.g., on a 4-cylinder motorcycle with a 6-speed transmission there could be up to 24 separate fuel tables)
	</li>
	<li>
	Unit has a -100/ +250% fuel change range (up from -100/ +100%) and 10 throttle position columns (up from 9 on PC III USB)
	</li>
	<li>
	Also features an enhanced &ldquo;accel pump&rdquo; utility via increased adjustment and sensitivity ranges
	</li>
</ul>

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

These overfenders feature a tough, aggressive look, and have a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable thermoplastic olefin (TPO) plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
	<li>Minor drilling and trimming may be required</li>
	<li>Includes mounting hardware</li>
</ul>

The Dual Zone ATV Heated Grips by Heat Demon include heated grips, thumb warmer, and mountable controller that regulates heat between the thumb and grips. Controller offers five levels of heat, has multiple mounting options, and provides LED light level indicators that dim for night time use. Totals 40 watts and draws less than 3 amps. Fits all 7/8" handlebars.

A collaboration with Heat Demon.&nbsp;

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

Provides generous protection from cold, wind, debris to rider’s hands, chest, head for enhanced comfort.

<ul>
	<li>
	&nbsp;Constructed of tough, durable&nbsp;and shatter-resistant polycarbonate
	</li>
	<li>
	&nbsp;Easy on easy off (after initial install) for servicing or towing, etc.
	</li>
	<li>
	&nbsp;Tilt is adjustable
	</li>
</ul>

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

These heavy-duty, durable cargo boxes provide extra luggage space that will allow you to take along your essentials for the ride or the job.

&nbsp;

<ul>
	<li>
	Constructed of durable, low-density polyethylene plastic
	</li>
	<li>
	Front Box: 37L, Rear Box: 66L capacity
	</li>
	<li>
	Water and dust-resistant, sealed lids utilize rubber ball-and-socket straps
	</li>
	<li>
	Both boxes have two 20 oz. cup holders integrated into the design for convenient use while on the trail
	</li>
	<li>
	Mounting location for flag or whip on Rear Cargo Box
	</li>
	<li>
	Designed to mount to front and rear stock racks (not compatible with accessory Rack Extensions) and includes installation hardware
	</li>
</ul>

This ATV Storage Cover helps protect your ATV while in storage.

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

Ideal for your ATV, Side by Side or boat. This new 4G design ball mount is designed to mount onto any flat surface at least 2"; around. The surface is sandwiched between the upper and lower plates.

In collaboration with Techmount.

Note: for use with Tech Gripper (sold separately)

Combining a powerful motor and smart digital contactor into one, the Motactor™ on the AXON Winch with 50 feet of Synthetic Rope is perfect for extreme environments. 

A collaboration with WARN&reg;.

<ul>
	<li>3,500 lb.: 3/16&rdquo; of Spydura synthetic rope</li>
	<li>Motactor&trade; simplifies winch installation by 50%</li>
	<li>Monitor speed, load and motor temperature from winch remote</li>
	<li>Load limiter prevents overloading winch damage</li>
	<li>Rigid all-metal, waterproof construction</li>
	<li>New clutch design based on legendary WARN 4WD hub lock design</li>
</ul>

This kit allows for the removal of the air induction system (AIS) from your ATV to reduce weight.

Direct replacement for the wire rope of the WARN 2500 lb. winch.

These rack extensions feature a rugged design and add additional functional space to the standard racks.

&nbsp;

<ul>
	<li>Constructed of bent steel tubing for strength and durability</li>
	<li>Front Rack Extension extends front rack height to just under 6&rdquo;, and rear rack height to 7.5&rdquo;</li>
	<li>Compatible with Gun Boot Mount, Cooler Carrier, and Rack Storage Bags (each sold separately)</li>
	<li>Easy to install to stock racks using included hardware</li>
</ul>

The Rear Grab Bar is made of special ball-burnished aluminum tube construction. Flag/whip mounting tab is included.

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

These Utility ATV Rigid Cargo Boxes feature a solid plastic design for durability with solid integrated hinged lids. Water and dirt-resistant seal and design. Two cam-over elastic latches which can be locked with padlocks. Solid mounting system that works with most Utility ATV racks.

&nbsp;

<ul>
	<li>Front trunk: 30&quot;L x 13&quot;W x 9&quot;H</li>
	<li>Rear trunk: 37&quot;L x 16&quot;W x 14&quot;H</li>
</ul>

Durable yet light weight aluminum Frame Skid Plate provides protection against rocks and other objects. Strategically placed holes allow for easy maintenance and efficient mud drainage.

GYTR Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc.

The 520 GTS2 offers the same exceptional &quot;X-Ring&quot; features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.

Note FZ1, YZF-R6, and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 1200cc</li>
	<li>Rivet-type master link included</li>
	<li>Replacement rivet-type master link also available, sold separately</li>
	<li>Tensile strength = 9,400lbs</li>
	<li>120 links</li>
	<li>Gold colored chain and links</li>
</ul>

The Quad Zone ATV Heated Grips by Heat Demon includes heated grips, thumb warmer, controller, DC plug and hardware.

A collaboration with Heat Demon.&nbsp;

Controller offers five levels of heat and four independent heat zones that share one set of display LEDs and setup buttons in a small, compact package. Two auxiliary ports can be used for Heat Demon&reg; Vest or Seat Heater (sold separately) using a 2.5mm DC plug (70 watts each). Totals 40 watts and draws less than 3 amps.

Jam out to some tunes by easily pairing your phone with Bluetooth 5.0 for a long range wireless connection. Mountable virtually anywhere with universal attachment points and integrated threaded mounting holes.

Includes remote to control volume, play/pause, change track or easily adjust the LED Party Lights and LED Light Bar.&nbsp;

Features AM/FM and Bluetooth with built-in microphone for speakerphone calls. Aux-In port to play audio from a wired device, Aux-Out port to daisy chain to other wired speakers, and a 5V USB charge port to make sure your phone keeps the party going. Easily connect additional 12V accessories or soundbars with the 12V 10A auxiliary output connector. Huge sound in small package at only 25.5&rdquo; long x 4.5&rdquo; tall (6.5&rdquo; tall with mounts).

Includes 6&#39; fused power lead, auxiliary power out mating connector, 2x mounting brackets, adjustable clamps, RF remote and universal mounting hardware.

<ul>
	<li>EcoCast. Allows up to 100 soundbars to be connected together or connected to any ECOXGEAR speaker with the EcoCast feature</li>
	<li>RGB Party Lights. Choose from Red?Green/White/Blue Solid, Sync to Music</li>
	<li>Integrated LED Light Bar. 3 color options &nbsp;(red, white, dimmed white)</li>
	<li>500W Total Peak Power. 8 total speakers - Dual Woofers, 4 mid-range and 2 tweeters. Two independently sealed cavities for true left and right stereo sound</li>
	<li>IP66 rated with Marine-Grade Speakers. 100% water, dirt and dust proof enclosure</li>
</ul>

&nbsp;

Fitment. Universal for most 12V vehicles including golf cars, boats, side-by-side vehicles, and ATV&rsquo;s.

Requires. Custom mounting solution and wiring to 12V source.

Recommended. 48-12V Regulator Kit for 2017~ Drive2 AC Electric, #J0J-H1910-V0-00, sold separately

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES