rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

ATV TEK

Heat Demon

Magellan

Techmount

PIAA

EcoXGear®

Dynojet

Black

Blue

Silver

Red/Black

Blue/White

Black/White

White

ATV: Sport

ATV: Utility

series

Series

Protection

Winches & Plows

Performance

Storage

Handlebars & Controls

Air Filter

Luggage

Audio and Tech

Covers

Overfenders & Flares

Miscellaneous

Lighting

Heated Accessories

Tools

Audio

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

$900.00 - $999.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The front Winch Mount Kit includes everything needed to mount on the stock front grab bar of a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Dedicated contactor mounting location for ease of installation</li>
</ul>

&nbsp;

Note: Requires&nbsp;Wiring Kit #DBY-10198-00-00, sold separately

&nbsp;

These HI/LO ATV Heated Grips by Heat Demon® increase rider comfort.

A collaboration with Heat Demon.&nbsp;

<ul>
	<li>
	Even and consistent heat distribution from unique flex-circuit technology
	</li>
	<li>
	Special molded rubber grips
	</li>
	<li>
	Totals 40 watts and draws less than 3 amps
	</li>
	<li>
	Fits all 7/8&quot; handlebars
	</li>
</ul>

Like the V-Grip™ Single but double the fun. Stay ready for the hunt with a custom fit and properly protected double slotted grip that’s hand-adjustable for when you’re on the trail. Fits all Utility ATV Racks.

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (4), mounting bases (2), rubber snubbers (4), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

Designed to attach to the accessory GYTR Footwells. Made from high-impact plastic.

Get the only mount that fits perfectly with handlebars, and all round tube racks, up to 1" in diameter. Includes forks (2), mounting bases (2), rubber snubbers (2), and all necessary hardware for easy installation. Fits all Utility ATV Racks.

This 2” Receiver Hitch is an easy bolt-on that allows you to use a standard ball mount to haul a small trailer or other implement with ease.

Do not exceed recommended tongue or towing weight. Standard equipment on the following 2016 models: Grizzly LE, Grizzly EPS SE, Kodiak 700 EPS, and Kodiak 700 EPS SE.

<ul>
	<li>Accepts 2&rdquo; receiver and standard hitch pin</li>
	<li>Pin not included&nbsp;</li>
</ul>

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

These sturdy brackets can be mounted to the middle of the ATV frame in minutes and are the only component left on the ATV when the plow is detached.

The ATV plow mount is designed not to interfere with routine maintenance, such as oil changes.

The Soft Fender Bag features a soft-sided design includes a full-length zipper for easy access and outside straps for additional attachments.

Direct replacement for the wire rope of the WARN 2500 lb. winch.

Direct replacement for the wire rope of the WARN 3500 lb. winch.

Increased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall performance. The GYTR&reg; UNI Air Filter can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

Roll over the worst terrain with no worries about your gun, bow, ice auger, etc. With precise engineering for a custom fit, your focus can stay on the hunt versus the care of your gear. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Provides an additional 16&quot; of horizontal adjustability once mounted
	</li>
	<li>
	Fits any FlexGrip&trade; product
	</li>
	<li>
	Easy to install
	</li>
</ul>

&nbsp;

GYTR&reg; Billet Air Filter Adaptor Plate required for installation.&nbsp;

This rugged mount allows you to take along a personal size, 6-can mini cooler so you have some drinks when you take a break out on the trail.

&nbsp;

<ul>
	<li>Bent sheet steel construction for strength and durability</li>
	<li>Can mount to either the front or rear stock rack</li>
	<li>Rubber padding to prevent cooler from sliding</li>
	<li>Includes nylon strap and buckles for securing cooler</li>
	<li>Dimensions of carrier base: 11.5&rdquo; x 8.5&rdquo;</li>
</ul>

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

These oversized (taller and longer) foot pegs are excellent for advanced riders. Pegs are 10mm taller and 40mm longer than stock.

The ATV Thumb Warmer by Heat Demon keeps riders thumb warm in cold weather. The warmer features a simple hi/lo/off operation and is easy to install- just peel and press.

A collaboration with Heat Demon.&nbsp;

The last thing you want is your gear unprotected with a loose fit and an unreliable mount. Keep your focus on the hunt by giving your gun, bow, etc. the careful fit and proper protection it deserves. In addition, experience effortless installation, solid mounting, and finger-adjustable knobs for quick, tool-free alterations while you’re on the move. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (2), mounting blocks (2), rubber snubbers (2), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

The GYTR Top End Gasket Kit is required for installation of the GYTR High Compression Piston Kit.

Ideal for your ATV, Side by Side or boat. This new 4G design ball mount is designed to mount onto any flat surface at least 2"; around. The surface is sandwiched between the upper and lower plates.

In collaboration with Techmount.

Note: for use with Tech Gripper (sold separately)

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

For the look of HID, replace stock headlight bulbs with these powerful, anti-vibration PIAA® 60W Super Plasma GT-X Upgrade Bulbs. This bulb shines at 5000K and projects a bluish purple light. Sold individually.

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The Replacement Gravel Skids fit 48" blades and are sold in pairs.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES