rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

ATV TEK

Heat Demon

Magellan

Techmount

Cycle Country

PIAA

EcoXGear®

Dynojet

Black

Blue

Silver

Red/Black

Blue/White

Black/White

White

ATV: Sport

ATV: Utility

series

Series

Protection

Winches & Plows

Performance

Storage

Handlebars & Controls

Air Filter

Luggage

Audio and Tech

Covers

Overfenders & Flares

Miscellaneous

Lighting

Heated Accessories

Tools

Audio

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

$900.00 - $999.99

price

Price

brand

Brand

Inch: 48

Pounds: 2500

Pounds: 4500

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc.

The 520 GTS2 offers the same exceptional &quot;X-Ring&quot; features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.

Note FZ1, YZF-R6, and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 1200cc</li>
	<li>Rivet-type master link included</li>
	<li>Replacement rivet-type master link also available, sold separately</li>
	<li>Tensile strength = 9,400lbs</li>
	<li>120 links</li>
	<li>Gold colored chain and links</li>
</ul>

The GYTR Race Grab Bar Number Plate Kit includes a replacement AMA regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

This kit allows for the removal of the air induction system (AIS) from your ATV to reduce weight.

Replacement parts for the WARN Quick-Detach Plow Kits.

These Yamaha Shock Covers help protect against rocks and debris. Heat-venting holes included for maximum performance. Easy to install and remove.

GYTR Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances.

Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

&nbsp;

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection.

Service with Yamaha Genuine Foam Filter Oil available from your Yamaha dealer.

Not for use with GYTR Billet Air Filter Adaptor Plate.

This 8" section of durable synthetic rope temporarily replaces your wire winch rope for the plow season saving wear and tear on the winch wire rope. It stands up to repeated sharp angle pulls used to lift heavy plows and works on all aluminum drum WARN® ATV and Side-by-Side winches.

The Replacement Gravel Skids fit 48" blades and are sold in pairs.

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

For the look of HID, replace stock headlight bulbs with these powerful, anti-vibration PIAA® 60W Super Plasma GT-X Upgrade Bulbs. This bulb shines at 5000K and projects a bluish purple light. Sold individually.

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

Ideal for your ATV, Side by Side or boat. This new 4G design ball mount is designed to mount onto any flat surface at least 2"; around. The surface is sandwiched between the upper and lower plates.

In collaboration with Techmount.

Note: for use with Tech Gripper (sold separately)

The GYTR Top End Gasket Kit is required for installation of the GYTR High Compression Piston Kit.

The last thing you want is your gear unprotected with a loose fit and an unreliable mount. Keep your focus on the hunt by giving your gun, bow, etc. the careful fit and proper protection it deserves. In addition, experience effortless installation, solid mounting, and finger-adjustable knobs for quick, tool-free alterations while you’re on the move. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (2), mounting blocks (2), rubber snubbers (2), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

The ATV Thumb Warmer by Heat Demon keeps riders thumb warm in cold weather. The warmer features a simple hi/lo/off operation and is easy to install- just peel and press.

A collaboration with Heat Demon.&nbsp;

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

These oversized (taller and longer) foot pegs are excellent for advanced riders. Pegs are 10mm taller and 40mm longer than stock.

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

This rugged mount allows you to take along a personal size, 6-can mini cooler so you have some drinks when you take a break out on the trail.

&nbsp;

<ul>
	<li>Bent sheet steel construction for strength and durability</li>
	<li>Can mount to either the front or rear stock rack</li>
	<li>Rubber padding to prevent cooler from sliding</li>
	<li>Includes nylon strap and buckles for securing cooler</li>
	<li>Dimensions of carrier base: 11.5&rdquo; x 8.5&rdquo;</li>
</ul>

GYTR&reg; Billet Air Filter Adaptor Plate required for installation.&nbsp;

Roll over the worst terrain with no worries about your gun, bow, ice auger, etc. With precise engineering for a custom fit, your focus can stay on the hunt versus the care of your gear. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Provides an additional 16&quot; of horizontal adjustability once mounted
	</li>
	<li>
	Fits any FlexGrip&trade; product
	</li>
	<li>
	Easy to install
	</li>
</ul>

&nbsp;

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

Increased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall performance. The GYTR&reg; UNI Air Filter can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.

Direct replacement for the wire rope of the WARN 3500 lb. winch.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES