rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Magellan

EcoXGear®

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Air Filter

Covers

Overfenders & Flares

Audio and Tech

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR Race Grab Bar Number Plate Kit includes a replacement AMA regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

The Yamaha Quick-Release Fastener Kit allow quick and easy, no-tools removal of body work. Kit comes with 10 fasteners and clips.

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

<ul>
	<li>
	Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles.
	</li>
	<li>
	Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.
	</li>
</ul>

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

The ATV Seat Heater by Heat Demon is a thin, flexible seat heater that installs underneath stock seat cover and warms up fast. Includes on/off switch or can be used with the controller that comes with the Heat Demon&reg; Quad Zone&nbsp;ATV Heated Grips, sold separately. Heater measures 10" x 9" and foam cover mesures 12" x 10".

A collaboration with Heat Demon.&nbsp;

This rugged rear grab bar is designed to protect the taillight and total rear end of the ATV.

&nbsp;

<ul>
	<li>
	Constructed of durable bent steel tubing
	</li>
	<li>
	Replaces rear rack support bars
	</li>
	<li>
	Includes mounting points for auxiliary lights
	</li>
</ul>

The SE Front Grab Bar helps provide protection to components of the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1” diameter, 6063 aluminum alloy tubing and durable black powder-coat finish. 

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

The last thing you want is your gear unprotected with a loose fit and an unreliable mount. Keep your focus on the hunt by giving your gun, bow, etc. the careful fit and proper protection it deserves. In addition, experience effortless installation, solid mounting, and finger-adjustable knobs for quick, tool-free alterations while you’re on the move. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (2), mounting blocks (2), rubber snubbers (2), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances.

Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

&nbsp;

Provides lightweight, durable protection for tight approaches, high stumps, or rocks on the trail.

&nbsp;

<ul>
	<li>Constructed of 5052 brushed aluminum</li>
	<li>Does not affect approach angle</li>
	<li>Replaces stock front plate for a nice fit and finish</li>
	<li>Compatible with both stock and accessory front grab bars (sold separately)</li>
</ul>

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

Like the V-Grip™ Single but double the fun. Stay ready for the hunt with a custom fit and properly protected double slotted grip that’s hand-adjustable for when you’re on the trail. Fits all Utility ATV Racks.

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (4), mounting bases (2), rubber snubbers (4), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

This rugged mount allows you to take along a personal size, 6-can mini cooler so you have some drinks when you take a break out on the trail.

<ul>
	<li>
	Bent sheet steel construction for strength and durability
	</li>
	<li>
	Can mount to either the front or rear stock rack
	</li>
	<li>
	Rubber padding to prevent cooler from sliding
	</li>
	<li>
	Includes nylon strap and buckles for securing cooler
	</li>
	<li>
	Dimensions of carrier base: 11.5&rdquo; x 8.5&rdquo;
	</li>
</ul>

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

These Yamaha Shock Covers help protect against rocks and debris. Heat-venting holes included for maximum performance. Easy to install and remove.

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES