rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Magellan

Assault Industries

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Audio and Tech

Storage

Lighting

Sun Tops

Performance

Overfenders & Flares

Electrical

Mirrors

Safety Gear

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Pounds: 2500

Pounds: 3500

Inch: 1.5

mm: 36

mm: 14

size

Size

color

Color

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>4,500 lb.: &frac14;&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The VRX Wiring Kit includes everything needed to install a 4,500 pound VRX Series winch.

A collaboration with WARN&reg;. Kit Includes:

<ul>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Wired remote</li>
</ul>

Note: Requires Heavy Duty Front Brush Guard #BAS-F84L0-V0-00 or Front Grab Bar with Winch Mount #BAS-F84L0-T0-00, sold separately

The VRX Wiring Installation Kit includes everything needed to install a 4,500 pound VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
</ul>

For non-XT-R units, requires Fairlead Mount #BAR-F28M0-V0-00 or&nbsp; Accessory Front Grab Bar #BAR-F84L0-V0-00, sold separately

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>3,500 lb.: 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of wire Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 2,500 pound capacities</li>
	<li>2,500 lb.: 3/16&rdquo; wire rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
	<li>See unit specific fitment for required winch mount and/or wiring kit</li>
</ul>

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The VRX Wiring Kit includes everything needed to install a 2,500 or 3,500 lb. VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Fairlead Adaptor for 2,500 and 3,500 lb. winches</li>
</ul>

&nbsp;

Note:&nbsp;

<ul>
	<li>Requires Heavy Duty Front Brush Guard #BAS-F84L0-V0-00&nbsp;or Front Grab Bar with Winch Mount #BAS-F84L0-T0-00.&nbsp;Sold separately.</li>
	<li>2016-2019 models compatible only with 2,500 lb. VRX winch</li>
</ul>

The VRX Wiring Installation Kit includes everything needed to install a 2,500 or 3,500 pound VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
</ul>

For non-XT-R units, requires: Fairlead Mount #BAR-F28M0-V0-00 or Accessory Front Grab Bar #BAR-F84L0-V0-00, sold separately.

The Plow Mount by WARN® readies your UTV to plow snow, dirt, gravel and more.

A collaboration with WARN&reg;.

Note: Requires UTV Snow Plow Kit #ROV-PLOWK-IT-00, sold separately.

These durable modular front speakers crank out quality sound and bass response while being able to endure harsh conditions thanks to their marine-grade fiberglass construction. They are compatible with our Overhead Audio System or most other audio systems.

<ul>
	<li>Set includes stainless-steel mounting hardware.</li>
</ul>

This durable console is made of molded low density polyethylene (LDPE) for exceptional durability. 15.75"L x 11.81"W x 7.09"H

<ul>
	<li>Tongue-and-groove rubber gasket lid seal provides a dust and water resistant barrier for contents</li>
	<li>Easily mounts to the center seat location &mdash; no tools required</li>
	<li>Large stylized lid provides easy access to contents</li>
	<li>Console includes storage pocket and two cup holders (holds 12 oz. cans up to 20 oz. bottles)</li>
</ul>

The Wind Deflector is made from hard-coated polycarbonate that is scratch resistant and will not shatter like acrylic windshields. This upgrade helps divert the wind and provide protection. Injection molded plastic tool-less clamps make it easy to remove for cleaning and maintenance. Includes lower-edge brackets.

An alternative top option for the Viking VI, this soft top has a tough design that includes aluminum support bars for additional reinforcement. Also keeps passengers protected from the elements.

<ul>
	<li>
	Constructed of sail cloth fabric with embossed poly/cotton
	</li>
	<li>
	Secures to the Viking VI with straps and aluminum support straps
	</li>
	<li>
	Mold and mildew resistant with limited color fade from the sun
	</li>
	<li>
	Innovative design minimizes billowing and rattling
	</li>
	<li>
	Easy to install
	</li>
	<li>
	Prevents water pooling
	</li>
	<li>
	No metal snaps that can rust, corrode, and fail over time
	</li>
</ul>

&nbsp;

The Viking VI Soft Side Cover Protects occupants from rain, wind, mud and light trail debris.

<ul>
	<li>Quick snap-on/pull-off installation</li>
	<li>Zippers operate in conjunction with doors for easy in/out access</li>
	<li>Windows can be rolled up and secured with straps when not needed</li>
	<li>Made of durable Sur Last&reg; 300 denier nylon and clear vinyl</li>
	<li>Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly</li>
	<li>All components are rust and UV resistant</li>
</ul>

&nbsp;

Note:

<ul>
	<li>Highly recommended to be used in conjunction with accessory Rear Window, Folding Windshield&nbsp;and either Hard Sun Top or Soft Sun Top for maximum cab warmth and weather protection (all sold separately)</li>
	<li>When installed in conjunction with the accessory Folding Windshield and Top (sold separately), it closes the gap and provides a good seal from cold and rain</li>
</ul>

Dealer installation recommended (drilling and riveting required)

This durable sun top is designed to withstand the harshest conditions and protects passengers from sun, rain, branches and other brush.

&nbsp;

<ul>
	<li>
	Constructed of durable polypropylene
	</li>
	<li>
	Quick-release clamps make the sun top easy to take on and off
	</li>
	<li>
	Drain channel at front lip helps rain water runoff; keeping passengers dry
	</li>
	<li>
	Compatible with other Viking VI accessories
	</li>
	<li>
	Two pieces
	</li>
</ul>

The Viking 3-Seater Storage Cover provides full coverage and protection when not using. Made from tough and durable, 300 denier and solution-dyed poly and poly thread lock stitching. Cover has screened Yamaha logos and 3/4” polypropylene webbing and side-release buckles.

The Viking Soft Side Cover will protects occupants from rain, wind, mud, and light trail debris.

<ul>
	<li>Quick snap-on/pull-off installation</li>
	<li>Zippers operate in conjunction with doors for easy in/out access</li>
	<li>Windows can be rolled up and secured with straps when not needed</li>
	<li>Made of durable Sur Last&reg; 300 denier nylon and clear vinyl</li>
	<li>Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly</li>
	<li>All components are rust and UV resistant</li>
</ul>

Note:

<ul>
	<li>Highly recommended to be used in conjunction with accessory Rear Window, Folding Windshield, and either Hard Sun Top or Soft Sun Top for maximum cab warmth and weather protection (all sold separately)</li>
	<li>When installed in conjunction with the accessory Folding Windshield and Top (sold separately), it closes the gap and provides a good seal from cold and rain</li>
</ul>

Dealer installation recommended (drilling and riveting required).&nbsp;

The Rear Window is made of SurLast ® 70 all-weather, mildew and fade-resistant fabric with a clear 20-gauge polished vinyl window that will not yellow over time. Our window will provide years of added protection from wind, rain, and backwoods debris like brush and leaves.

<ul>
	<li>
	Anodized aluminum support bar
	</li>
	<li>
	Simple installation &ndash; secures with straps and zippers
	</li>
	<li>
	Designed to fit the Viking VI and not billow or rattle in most conditions
	</li>
	<li>
	Compatible with all Yamaha Genuine bed accessories
	</li>
</ul>

The Viking Rear Grab Bar mounts to OEM attachment points. Made of 2" tubing with a wall thickness of .065". It is designed to protect your Viking's rear area and fit the Viking's styling. Black wrinkle powder-coat finish helps ensure long life.

The Viking Overfenders set is made from a durable injected-molded polypropylene material. It provides additional mud and water protection.

This push button Horn Kit is great for alerting others of location or calling in livestock in agricultural environments. Easily installed using OE components and connectors.

A complete heater and defroster system for a Yamaha Viking - everything you need for a professional installation is included.

A collaboration with Heater Craft.&nbsp;American made and engineered.

<ul>
	<li>
	22,000 BTU/hr and a 240 CFM blower to provide maximum heating comfort&nbsp;
	</li>
	<li>
	A total of three vents - one for defrosting and two dash/cab vents
	</li>
	<li>
	Wire harness
	</li>
	<li>
	Two-position rocker switch
	</li>
	<li>
	Vent/heater hose and clamps
	</li>
	<li>
	All &nbsp;mounting brackets, hardware, cable ties&nbsp;and instructions included
	</li>
</ul>

The heavy-duty headlight brush guards help keep your headlights protected and operational when exploring the wilderness or working.

Welded steel sheet and tube construction and power-coat finish help ensure durability and reliability.

Note: Heavy Duty Brush Guard is required for installation.

The Viking Folding Windshield provides protection and versatility when conditions change thanks to its handy folding design.

Fold the hard-coated polycarbonate panels up or down to suit your needs.

<ul>
	<li>The windshield remains secure when folded down.</li>
	<li>Easy tool-free removal simplifies cleaning and maintenance.</li>
	<li>Other features include injection molded rubber hood blocks, injection molded plastic tool-less clamps, windshield-to-hood brackets, and is scratch resistant.</li>
	<li>Will not shatter like acrylic windshields.</li>
</ul>

Viking Extended Overfenders provide added protection from mud and water utilizing a durable 2-piece HMWPE plastic and rubber design. Ideal for use with oversized tires providing an additional 2” front and 2 ¾” rear coverage over the Yamaha Genuine Viking Overfender.

&nbsp;

NOTE: Does not work with Viking Over Fender.

The cargo bed box with 4 cubic feet of cargo capacity, our tough and durable polyethylene cargo bed box securely carries what you need when venturing out in your Viking. It is water and dust resistant and has lockable latches to secure valuables.

<ul>
	<li>
	Gas shocks on both lids keep lids raised for easy access
	</li>
	<li>
	Attachment points on both lids
	</li>
	<li>
	Great for hunters &ndash; no reflective surfaces
	</li>
</ul>

Requires the Bed Rail Accessory Mounts for installation, sold separately (factory installed on certain Viking models)&nbsp;

Protect the front of your Viking with our heavy duty brush guard. Designed to fit the Viking’s styling, it installs without having to remove the OEM brush guard and provides ample grill coverage and protection.

Other features include a welded steel sheet and tube construction with a power-coat finish, light mounting tabs to easily install accessory lighting (optional PIAA&reg; 510 Series lights shown), and vertical rubber strips and a winch hook.

The Viking Bed Rail Accessory Mounts provide quick, convenient and tool-less installation of Yamaha Genuine Accessories such as cargo bed box, gun boot mount, and our adjustable bed divider brackets. Mounts directly under the OEM bed rails and also features durable steel construction and no-rust finish bolts. These rails come equpped from the factory on certain Viking models, but can be purchased to replace damaged or worn bed rails.

&nbsp;

Note:&nbsp;

<ul>
	<li>Mounts come in either black or silver finish but are hidden under the fenders and are not visible after installation.</li>
</ul>

&nbsp;

&nbsp;

Our 3-Seater Soft Sun Top is made of SurLast 70 all-weather, mildew and fade-resistant fabric to help ensure long life and no-hassle protection from the elements. The included fiberglass support bars prevent water from pooling and also help minimize billowing and rattles.

<ul>
	<li>Weather-resistant straps allow you to install simply and quickly without tools.</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES