rootCategory.sidebyside.sidebyside-accessories

Yamaha Genuine

Warn

GYTR

SSV Works

Wet Sounds

Magellan

Assault Industries

Techmount

Heater Craft

Rekluse

Kolpin

EcoXGear®

Dynojet

Black

Blue

Side-by-Side

series

Series

Windshields & Wind Protection

Winches, Plow & Tow

Protection

Audio and Tech

Storage

Lighting

Sun Tops

Performance

Overfenders & Flares

Electrical

Mirrors

Safety Gear

Heated Accessories

Wheels & Tires

Covers

Batteries & Chargers

Trim & Accents

Air Filter

Tools

product_category

Product Category

$0.00 - $999.99

$1,000.00 - $1,999.99

$2,000.00 - $2,999.99

$6,000.00 - $6,999.99

price

Price

brand

Brand

Pounds: 4500

Pounds: 2500

Pounds: 3500

Inch: 1.5

mm: 36

mm: 14

size

Size

color

Color

The Factory Yamaha Speed Management Key limits the top speed to meet any special requirements from job sites or operating conditions, without affecting power. The key can be removed in either restricted or unrestricted mode for proper operation.

&nbsp;

<ul>
	<li>Full engine power while limiting speed to 25 mph</li>
	<li>Maintains full confidence in challenging terrains and preserves entire 2,000 lbs. of towing capability</li>
	<li>Works with the YCCT system to prevent surging or rev limiter feeling</li>
	<li>Easy Plug and Play installation</li>
</ul>

This durable console is made of molded low density polyethylene (LDPE) for exceptional durability. 15.75"L x 11.81"W x 7.09"H

<ul>
	<li>Tongue-and-groove rubber gasket lid seal provides a dust and water resistant barrier for contents</li>
	<li>Easily mounts to the center seat location &mdash; no tools required</li>
	<li>Large stylized lid provides easy access to contents</li>
	<li>Console includes storage pocket and two cup holders (holds 12 oz. cans up to 20 oz. bottles)</li>
</ul>

The Rhino Storage Cover helps protect your investment from the elements during times of storage.  Features the Rhino logo. Not designed for use while trailering.

This mount works with both 2" and 3" harnesses. 4-Point connection.

Windshield is 300% more scratch resistant due to hard-coating on both sides.

<ul>
	<li>
	3/16&rdquo; of optical-grade polycarbonate for superior clarity and rigidity
	</li>
	<li>
	Exclusive Yamaha-engineered toolless quick-release with glass-filled nylon clamps
	</li>
	<li>
	Seamless integration with the vehicle&rsquo;s hood and suntop for a perfect fit and superior sealing
	</li>
	<li>
	Designed to be trailered
	</li>
	<li>
	Works with the Yamaha Genuine Soft Enclosure Covers
	</li>
</ul>

&nbsp;

Replacement parts available:

<ul>
	<li>
	Hood Bumper Kit #B4M-K7240-V0-00
	</li>
	<li>
	Latch Kit&nbsp;#B4M-K7260-V0-00
	</li>
	<li>
	Clamps #BG4-F72C2-V0-00
	</li>
</ul>

&nbsp;

Note: Not compatible with Hard Cab System Doors.

The Rear Brush Guard is designed to protect your Wolverine X2’s back end while keeping the aggressive style of your side-by-side. This tubular and plate steel Rear Brush Guard features six integrated mounting locations for a simple installation. The brush guard itself features mounting positions for Yamaha’s Accessory Lights-Flood or Accessory Lights-Spot, both sold separately, letting you add lighting at the rear of the vehicle.

<ul>
	<li>
	Durable, rugged steel construction with a powder-coated finish
	</li>
	<li>
	Extends down the frame tube for additional coverage
	</li>
</ul>

This Rear Window is made of SurLast 600D all-weather, mildew, and fade-resistant fabric with a clear polished vinyl window that will not yellow over time. Our window will provide years of added protection from wind, rain and debris.

<ul>
	<li>
	Clear window can be rolled up for air movement in the cab
	</li>
	<li>
	Prevents &ldquo;dust swirling&rdquo; from the back of vehicle
	</li>
	<li>
	Solution dyed &ndash; this is the best method of dyeing; the dye solution is 100% through the thread, not just on the outside
	</li>
</ul>

The VRX Wiring Kit includes everything needed to install a 4,500 pound VRX Series winch.

A collaboration with WARN&reg;. Kit Includes:

<ul>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Wired remote</li>
</ul>

Note: Requires Heavy Duty Front Brush Guard #BAS-F84L0-V0-00 or Front Grab Bar with Winch Mount #BAS-F84L0-T0-00, sold separately

The Front Winch Mount Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Wired remote</li>
	<li>Maximum VRX winch capacity: 3,500 lb.</li>
</ul>

The Soft Rear Window (which is included in the Soft Cab Enclosure System) is now available to purchase separately. Perfect for Wolverine X2 owners wanting added protection from wind, rain, and debris.

<ul>
	<li>
	Quick snap-on/pull-off installation
	</li>
	<li>
	Windows can be rolled up and secured with straps when not needed and to access the rear cargo area
	</li>
	<li>
	Made of durable Sur Last&reg; 300D and clear vinyl
	</li>
	<li>
	Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly
	</li>
	<li>
	Highly recommended to be used in conjunction with our accessory Polycarbonate Front Windshield or Hard Cab Enclosure System Glass Front Windshield with Wiper, both sold separately
	</li>
	<li>
	Requires Hard Sun Top Kit, sold separately
	</li>
	<li>
	All components are rust and UV-resistant
	</li>
</ul>

Note:

<ul>
	<li>
	Not compatible with accessory Hard Cab Enclosure System Doors, sold separately
	</li>
	<li>
	Dealer installation recommended (drilling and riveting required)
	</li>
</ul>

Our Gun Boot Mount provides secure transport of one or two gun boots. The design allows you to remove the end portion of the gun boot without removing the entire gun boot from the mount.

&nbsp;

<ul>
	<li>Accessory Mounting Bar (sold separately) required for installation</li>
	<li>Mount location is up and out of the bed, leaving you ample space for other cargo</li>
	<li>Two mounting positions</li>
	<li>Black wrinkle powder coat finish</li>
</ul>

The Thermostat By-Pass Heater Kit bypasses the thermostat to increase the heat of the cab while decreasing the time it takes to heat up. This kit can be used on all previous generation cab heater kits for the 850cc Wolverines.

&nbsp;

<ul>
	<li>Experience approximately a 20% increase in temperature output and a 40% decrease in warm-up time*</li>
	<li>Simply drain the coolant, install the kit and then refill the coolant system (refer to Service Manual)</li>
	<li>Cab Heater can remain in unit</li>
	<li>Incudes thermostat bypass and all needed hoses</li>
</ul>

* Based on unit warm up at 35&deg;F at idle

This versatile Yamaha Tailgate easily slides in and out of the cargo bed frame, allowing you to quickly remove it for large loads. Includes all necessary hardware to secure the tailgate to the cargo bed.

The Rear Window is made of SurLast ® 70 all-weather, mildew and fade-resistant fabric with a clear 20-gauge polished vinyl window that will not yellow over time. Our window will provide years of added protection from wind, rain, and backwoods debris like brush and leaves.

<ul>
	<li>
	Anodized aluminum support bar
	</li>
	<li>
	Simple installation &ndash; secures with straps and zippers
	</li>
	<li>
	Designed to fit the Viking VI and not billow or rattle in most conditions
	</li>
	<li>
	Compatible with all Yamaha Genuine bed accessories
	</li>
</ul>

The Viking Bed Rail Accessory Mounts provide quick, convenient and tool-less installation of Yamaha Genuine Accessories such as cargo bed box, gun boot mount, and our adjustable bed divider brackets. Mounts directly under the OEM bed rails and also features durable steel construction and no-rust finish bolts. These rails come equpped from the factory on certain Viking models, but can be purchased to replace damaged or worn bed rails.

&nbsp;

Note:&nbsp;

<ul>
	<li>Mounts come in either black or silver finish but are hidden under the fenders and are not visible after installation.</li>
</ul>

&nbsp;

&nbsp;

The Viking Overfenders set is made from a durable injected-molded polypropylene material. It provides additional mud and water protection.

Provides additional protection from mud and water with both stock and accessory wheels and tires. Made from durable thermo-formed plastic.

The Rear Brush Guard is designed to protect your Wolverine X4’s back end while keeping the aggressive style of your side-by-side.

This tubular and plate steel Rear Brush Guard features six integrated mounting locations for a simple installation. The brush guard itself features mounting positions for Yamaha&rsquo;s Accessory Lights-Flood or Accessory Lights-Spot, both sold separately, letting you add lighting at the rear of the vehicle.

<ul>
	<li>
	Durable, rugged steel construction with a powder-coated finish
	</li>
	<li>
	Extends down the frame tube for additional coverage
	</li>
</ul>

Note: Cannot be used in conjunction with the Wolverine X4 Spare Tire Mount.

These lightweight high-impact plastic (HWMPE) guards provide additional protection to the front A-Arms, steering and drive components.

<ul>
	<li>
	Ultra-thick and shatterproof to glide over obstacles
	</li>
	<li>
	Provides additional protection for CV boots
	</li>
	<li>
	Recessed stainless steel mounting hardware included
	</li>
	<li>
	No drilling required
	</li>
</ul>

Tired of having bags of hardware and spacers? Us too —so we fixed it! These aluminum A-Arm guards utilize factory installed mounting points for simple installation, combining the style and performance you expect from Yamaha Genuine Accessories.

Note: Front and Rear A-Arm Guards sold separately.

Front

With recessed mounting, debris venting, and the durability of aluminum construction, the A-Arm guards are a perfect addition to keep your Wolverine X2/ X4 on the trail longer.&nbsp;

<ul>
	<li>
	No loose spacers or clamps
	</li>
	<li>
	Stainless steel mounting hardware included
	</li>
</ul>

&nbsp;

Rear

Add an extra level of protection to your Wolverine&#39;s rear A-arms and drive axle components. These aluminum A-arm guards utilize factory mounting points for simple installation.

<ul>
	<li>
	All aluminum construction
	</li>
	<li>
	Designed to protect but not get in the way when traversing trail obstacles like ruts, rocks and roots
	</li>
	<li>
	Clean-out ports help reduce mud build up and make cleaning easier
	</li>
	<li>
	Quick installation using integrated mounting points on the A-Arms
	</li>
</ul>

The heavy-duty headlight brush guards help keep your headlights protected and operational when exploring the wilderness or working.

Welded steel sheet and tube construction and power-coat finish help ensure durability and reliability.

Note: Heavy Duty Brush Guard is required for installation.

The VRX Wiring Kit includes everything needed to install a 2,500 or 3,500 lb. VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Wired remote</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for dash-mounted rocker switch</li>
	<li>Fairlead Adaptor for 2,500 and 3,500 lb. winches</li>
</ul>

&nbsp;

Note:&nbsp;

<ul>
	<li>Requires Heavy Duty Front Brush Guard #BAS-F84L0-V0-00&nbsp;or Front Grab Bar with Winch Mount #BAS-F84L0-T0-00.&nbsp;Sold separately.</li>
	<li>2016-2019 models compatible only with 2,500 lb. VRX winch</li>
</ul>

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

The Viking Rear Grab Bar mounts to OEM attachment points. Made of 2" tubing with a wall thickness of .065". It is designed to protect your Viking's rear area and fit the Viking's styling. Black wrinkle powder-coat finish helps ensure long life.

These lightweight, aluminum guards provide durable protection to the Wolverine’s A-Arms.

<ul>
	<li>Gives the unit some additional protection from rocks, roots, and trail debris</li>
</ul>

Note: Front and Rear A-Arm Guards are sold separately.

The Soft Rear Window (which is included in the Soft Cab Enclosure System) is now available to purchase separately. Perfect for Wolverine X4 owners wanting added protection from wind, rain, and debris.

<ul>
	<li>
	Quick snap-on/pull-off installation
	</li>
	<li>
	Windows can be rolled up and secured with straps when not needed and to access the rear cargo area
	</li>
	<li>
	Made of durable Sur Last&reg; 300 denier nylon and clear vinyl
	</li>
	<li>
	Attaches with hook-and-loop and permanent riveted snaps, no adhesive that gums up your panels/doors and wears out quickly
	</li>
	<li>
	Highly recommended to be used in conjunction with our accessory Polycarbonate Front Windshield or Hard Cab Enclosure System Glass Front Windshield with Wiper, both sold separately
	</li>
	<li>
	Requires Hard Sun Top Kit, sold separately
	</li>
	<li>
	All components are rust and UV-resistant
	</li>
	<li>
	Not compatible with accessory Hard Cab Enclosure System Doors, sold separately
	</li>
</ul>

Dealer installation recommended (drilling and riveting required)

Easy plug and play installation. The Lighted Headlight Switch upgrades the Standard Wolverine RMAX 1000 to the same switch found in the Special and Limited Edition units. Blue LED light complements the color scheme of the gauge. Replaces the non-lighted headlight switch.

A lightweight, soft-touch padding kit that provides added interior comfort for the driver and passenger; especially beneficial during rough riding conditions.

&nbsp;

<ul>
	<li>Attractive styling matches any model color and features black piping with a carbon fiber-look texture</li>
	<li>High-quality heat-resistant adhesive allows for easy installation</li>
	<li>Includes padding for doors and transmission tunnel</li>
</ul>

The Yamaha Genuine A-Arm Guards add extra protection to the Wolverine RMAX 1000 A-Arms, CVJ boot and axle components and utilize factory-integrated mounting points with OEM-level hardware for an unmatched fit and finish.

&nbsp;

<ul>
	<li>1/8&rdquo; of all-aluminum construction</li>
	<li>Brushed finish matches accessory Front Skid Plate (sold separately)</li>
	<li>Billet machine spacers welded to the skid plate and integrated mounting points ease installation</li>
	<li>Recessed mounting hardware resists snags</li>
	<li>Clean out port for self-draining and washing</li>
</ul>

Add an extra level of protection to your X2 1000 Front A-Arms with these Aluminum A-Arm guards that utilize factory mounting points for convenient installation to provide the fitment you expect from Yamaha Genuine Accessories.

<ul>
	<li>
	All aluminum construction 1/8&rdquo;
	</li>
	<li>
	Brushed finish to match our Acc front skid plate.
	</li>
	<li>
	Recessed hardware provide a smooth surface&nbsp;
	</li>
	<li>
	Quick installation with no loose spacers and mounts to integrated points on the A-Arms
	</li>
	<li>
	Ease of self-draining and cleaning, accomplished with strategically positioned clean out port&nbsp;
	</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES