rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

The RAM Mounts LED Spotlight has been redesigned with a new LED bulb yielding a brighter, more efficient light for added safety while keeping a lower power draw to your ATV, boat or vehicle.

A collaboration with RAM.

The weather-resistant body shields the 30-degree spot light LED bulb, which yields a wider and brighter range of light, from the elements. The long cord with standard 12v plugin means you can mount the light from nearly any location. Consists of a u-bolt base that makes attaching to handlebars, tubing, or railing a breeze. Simple to install and easy to use, the possibilities become endless. Included in this package is hardware for tubing that is 0.50&quot; to 1.25&quot; in diameter.

<ul>
	<li>12 Volts DC</li>
	<li>9 Watts</li>
	<li>1900 Lumens</li>
	<li>Sealed Beam</li>
	<li>30-Degree Spot Light</li>
	<li>Frosted Lens</li>
	<li>4500K Color Temp</li>
</ul>

This rugged Brush Guard is designed to provide additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile of the Kodiak while adding a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by&nbsp;Warn&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The ATV Seat Heater by Heat Demon is a thin, flexible seat heater that installs underneath stock seat cover and warms up fast. Includes on/off switch or can be used with the controller that comes with the Heat Demon&reg; Quad Zone&nbsp;ATV Heated Grips, sold separately. Heater measures 10" x 9" and foam cover mesures 12" x 10".

A collaboration with Heat Demon.&nbsp;

These rack extensions feature a rugged design and add functional cargo space to the OE racks. Constructed of bent steel tubing for strength and durability. The Rear Rack Extension extends rear rack height to 7.5”.

<ul>
	<li>Compatible with accessory Gun Boot Mount, Cooler Carrier, and Rack Storage Bags (all sold separately)</li>
	<li>Black powder-coated finish</li>
	<li>Easy to install racks using included hardware</li>
</ul>

These overfenders feature a tough, aggressive look, and have a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable thermoplastic olefin (TPO) plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
	<li>Minor drilling and trimming may be required</li>
	<li>Includes mounting hardware</li>
</ul>

Without sacrificing any style, the Heavy Duty Front Grab Bar protects the front front end, fenders and headlights from brush and trail obstacles. of the Kodiak 450.

<ul>
	<li>
	Integrated mount for easy and convenient installation of Warn AXON winch up to 3500lb.
	</li>
	<li>
	Includes anchor points to securely tie down the front end
	</li>
	<li>
	All-steel 1.5&rdquo; tubing with E-Coated and textured powder coating that matches unit&rsquo;s racks for exceptional durability
	</li>
	<li>
	Easy bolt-on utilizing stock mounting location
	</li>
	<li>
	Conveniently add accessory LED POD lights with integrated mounts
	</li>
</ul>

This rugged Front Brush Guard is designed to provide additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile of the Kodiak 450.

&nbsp;

<ul>
	<li>Helps protect the front end and headlights while complementing the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Black powder-coated finish</li>
	<li>Includes mounting hardware</li>
</ul>

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

<ul>
	<li>
	Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles.
	</li>
	<li>
	Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.
	</li>
</ul>

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

Increased filter area increases airflow and horsepower. Unsurpassed in airflow, dirt stopping, and overall performance. The GYTR&reg; UNI Air Filter can be easily washed and re-oiled. Designed to work with the Billet Air Filter Adaptor Plate.

The GYTR Top End Gasket Kit is required for installation of the GYTR High Compression Piston Kit.

The GYTR Sport Front Grab Bar features special ball-burnished aluminum tube construction with lower bash plate. &nbsp;The grab bar is designed to be both functional and sporty.

The GYTR Race Grab Bar Number Plate Kit includes a replacement AMA regulation size number plate with all necessary mounting hardware. For use on GYTR Race Front and Rear Grab Bars.

GYTR Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection.

Service with Yamaha Genuine Foam Filter Oil available from your Yamaha dealer.

Not for use with GYTR Billet Air Filter Adaptor Plate.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

Made from 7075-T6 billet aluminum and CNC-machined for maximum fit accuracy. Features a radial mud groove etched just inside the sprocket teeth to shed mud and grit which saves weight and increases chain life. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only because regulated exhaust emissions are affected.

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances.

Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

&nbsp;

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc.

The 520 GTS2 offers the same exceptional &quot;X-Ring&quot; features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.

Note FZ1, YZF-R6, and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 1200cc</li>
	<li>Rivet-type master link included</li>
	<li>Replacement rivet-type master link also available, sold separately</li>
	<li>Tensile strength = 9,400lbs</li>
	<li>120 links</li>
	<li>Gold colored chain and links</li>
</ul>

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

The GYTR 428 GMX Non-Sealed (Non O-Ring) Chain is a high-quality replacement chain for racing or trail usage and offers the ultimate balance of performance and durability for dirt bikes and ATVs under 200cc.

<ul>
	<li>Displacement limit: under 200cc</li>
	<li>Clip-type master link included</li>
	<li>Replacement clip-type master link also available, sold separately</li>
	<li>Tensile strength = 5,000lbs</li>
	<li>120 links/ 136 links (Big Wheel Conversion)</li>
	<li>Intended for smaller displacement off-road applications</li>
	<li>Comes with solid bushings, solid rollers, and heat-treated steel alloys</li>
</ul>

&nbsp;

<ul>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES