Antigravity Jump Start Harness Kit
- Permanently affixes a 12" long jump start harness to your battery.
- Eliminates the need to carry jumper cables – just plug your Micro Start™ directly to the cable lead.
- Comes with an SAE adaptor (fits most newer battery chargers) to charge your battery while stored.
- SAE adapter is also included which allows you to hook up a standard SAE-type charger to the Micro-Start harness. The adapter converts the Micro-Start harness (blue connector) down to an SAE connector so you can easily hook up your battery charger and eliminate the standard SAE harness you might have.
NOTICE: A standard SAE-type harness will NOT handle jump-starting – the wire gauge is much too thin and the wires will melt. The Micro-Start is intended for jump starting only through the jump start port. Never leave the Micro-Start connected to your vehicle’s battery for longer than 30 seconds. Never use the Micro-Start in place of your regular battery. Never attempt to charge the Micro-Start directly from your battery through the jump start port – this could result in severe damage.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.